From: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Michael Turquette <mturquette@baylibre.com>,
Stephen Boyd <sboyd@kernel.org>, Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Philipp Zabel <p.zabel@pengutronix.de>,
Konrad Dybcio <konradybcio@kernel.org>,
Robert Marko <robimarko@gmail.com>,
Guru Das Srinagesh <linux@gurudas.dev>,
Linus Walleij <linusw@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-clk@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
linux-gpio@vger.kernel.org,
Kathiravan Thirumoorthy
<kathiravan.thirumoorthy@oss.qualcomm.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Subject: [PATCH v2 0/6] Add minimal boot support for Qualcomm IPQ5210
Date: Wed, 18 Mar 2026 14:09:42 +0530 [thread overview]
Message-ID: <20260318-ipq5210_boot_to_shell-v2-0-a87e27c37070@oss.qualcomm.com> (raw)
The IPQ5210 is Qualcomm's SoC for Routers, Gateways and Access Points. This
series adds minimal board boot support for ipq5210-rdp504 board.
SoCs based on IPQ5210 is shipped under 2 different marketing names such as
Qualcomm Dragonwing F8 and Qualcomm Dragonwing N8. The difference being is
F8 parts has the Passive Optical Network(PON) interface which acts as the
backhaul where as in N8 parts it is ethernet backhaul.
Qualcomm Dragonwing F8 Platform:
https://www.qualcomm.com/networking-infrastructure/products/f-series/f8-platform
Qualcomm Dragonwing N8 Platform:
https://www.qualcomm.com/networking-infrastructure/products/n-series/n8-platform
Signed-off-by: Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
---
Changes in v2:
- Separated out the TLMM patches into dedicated series
- Dropped the extra ':' from the GCC binding
- Added a comment in GCC driver for the need of CLK_IS_CRITICAL
- Various cosmetic changes in DTS (inclusion of dma-ranges property, \n
before status property, lower case phandles, enabled the QUP node by
default in the DTSI)
- Picked the R-b, A-b tags
- Dropped the SDHCI binding change since it is applied
- Link to v1:
https://lore.kernel.org/r/20260311-ipq5210_boot_to_shell-v1-0-fe857d68d698@oss.qualcomm.com
---
Kathiravan Thirumoorthy (6):
dt-bindings: clock: add Qualcomm IPQ5210 GCC
clk: qcom: add Global Clock controller (GCC) driver for IPQ5210 SoC
dt-bindings: qcom: add ipq5210 boards
dt-bindings: firmware: qcom,scm: Document ipq5210 SCM
arm64: dts: qcom: add IPQ5210 SoC and rdp504 board support
arm64: defconfig: enable IPQ5210 RDP504 base configs
Documentation/devicetree/bindings/arm/qcom.yaml | 5 +
.../bindings/clock/qcom,ipq5210-gcc.yaml | 62 +
.../devicetree/bindings/firmware/qcom,scm.yaml | 1 +
arch/arm64/boot/dts/qcom/Makefile | 1 +
arch/arm64/boot/dts/qcom/ipq5210-rdp504.dts | 86 +
arch/arm64/boot/dts/qcom/ipq5210.dtsi | 311 +++
arch/arm64/configs/defconfig | 2 +
drivers/clk/qcom/Kconfig | 8 +
drivers/clk/qcom/Makefile | 1 +
drivers/clk/qcom/gcc-ipq5210.c | 2661 ++++++++++++++++++++
include/dt-bindings/clock/qcom,ipq5210-gcc.h | 126 +
include/dt-bindings/reset/qcom,ipq5210-gcc.h | 127 +
12 files changed, 3391 insertions(+)
---
base-commit: 8e5a478b6d6a5bb0a3d52147862b15e4d826af19
change-id: 20260309-ipq5210_boot_to_shell-43db656579f0
prerequisite-change-id: 20260317-ipq5210_tlmm-df221be105b5:v2
prerequisite-patch-id: 459d23e18bb8cbed98775775e4e330d9a45a36d4
prerequisite-patch-id: 7ed57adb6c96a0c74f5a13321770595919456ac7
Best regards,
--
Kathiravan Thirumoorthy <kathiravan.thirumoorthy@oss.qualcomm.com>
next reply other threads:[~2026-03-18 8:39 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-18 8:39 Kathiravan Thirumoorthy [this message]
2026-03-18 8:39 ` [PATCH v2 1/6] dt-bindings: clock: add Qualcomm IPQ5210 GCC Kathiravan Thirumoorthy
2026-03-18 8:39 ` [PATCH v2 2/6] clk: qcom: add Global Clock controller (GCC) driver for IPQ5210 SoC Kathiravan Thirumoorthy
2026-03-18 8:39 ` [PATCH v2 3/6] dt-bindings: qcom: add ipq5210 boards Kathiravan Thirumoorthy
2026-03-18 8:39 ` [PATCH v2 4/6] dt-bindings: firmware: qcom,scm: Document ipq5210 SCM Kathiravan Thirumoorthy
2026-03-18 8:39 ` [PATCH v2 5/6] arm64: dts: qcom: add IPQ5210 SoC and rdp504 board support Kathiravan Thirumoorthy
2026-03-18 11:44 ` Konrad Dybcio
2026-03-18 13:12 ` Kathiravan Thirumoorthy
2026-03-18 8:39 ` [PATCH v2 6/6] arm64: defconfig: enable IPQ5210 RDP504 base configs Kathiravan Thirumoorthy
2026-03-19 2:46 ` (subset) [PATCH v2 0/6] Add minimal boot support for Qualcomm IPQ5210 Bjorn Andersson
2026-03-24 1:56 ` Bjorn Andersson
2026-03-24 3:05 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260318-ipq5210_boot_to_shell-v2-0-a87e27c37070@oss.qualcomm.com \
--to=kathiravan.thirumoorthy@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linusw@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-clk@vger.kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@gurudas.dev \
--cc=mturquette@baylibre.com \
--cc=p.zabel@pengutronix.de \
--cc=robh@kernel.org \
--cc=robimarko@gmail.com \
--cc=sboyd@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®