[PATCH v3] staging: rtl8723bs: remove dead code

[Aadarsh Mandal <aadarshmandal9354@gmail.com>]

remove unused and commented code 
no changes in functionality

Signed-off-by: Aadarsh Mandal <aadarshmandal9354@gmail.com>
---
v3:
 - regenrated patch from the clean tree
 - removed unwanted addition
v2:
 - accidently added the functions in the {} blocks
v1:
 - some commented code wasnt deleted.
Note:
* This patch is part of the GSoC2026 application process for device tree bindings conversions
* https://github.com/LinuxFoundationGSoC/ProjectIdeas/wiki/GSoC-2026-Device-Tree-Bindings

 drivers/staging/rtl8723bs/hal/sdio_halinit.c | 21 ++++++--------------
 1 file changed, 6 insertions(+), 15 deletions(-)

diff --git a/drivers/staging/rtl8723bs/hal/sdio_halinit.c b/drivers/staging/rtl8723bs/hal/sdio_halinit.c
index 063a0737933e..8fbb46b3019d 100644
--- a/drivers/staging/rtl8723bs/hal/sdio_halinit.c
+++ b/drivers/staging/rtl8723bs/hal/sdio_halinit.c
@@ -68,8 +68,8 @@ u8 _InitPowerOn_8723BS(struct adapter *padapter)
 	rtw_write16(padapter, REG_APS_FSMCO, value16);
 
 	/*  Enable CMD53 R/W Operation */
-	rtw_write8(padapter, REG_CR, 0x00);
 
+	rtw_write8(padapter, REG_CR, 0x00);
 	/*  Enable MAC DMA/WMAC/SCHEDULE/SEC block */
 	value16 = rtw_read16(padapter, REG_CR);
 	value16 |= (
@@ -210,7 +210,7 @@ static void _InitNormalChipOneOutEpPriority(struct adapter *Adapter)
 	struct hal_com_data *pHalData = GET_HAL_DATA(Adapter);
 
 	u16 value = 0;
-
+	
 	switch (pHalData->OutEpQueueSel) {
 	case TX_SELE_HQ:
 		value = QUEUE_HIGH;
@@ -338,7 +338,7 @@ static void _InitTransferPageSize(struct adapter *padapter)
 	/*  Tx page size is always 128. */
 
 	u8 value8;
-
+	
 	value8 = _PSRX(PBP_128) | _PSTX(PBP_128);
 	rtw_write8(padapter, REG_PBP, value8);
 }
@@ -482,7 +482,6 @@ static void _initSdioAggregationSetting(struct adapter *padapter)
 	struct hal_com_data	*pHalData = GET_HAL_DATA(padapter);
 
 	/*  Tx aggregation setting */
-/*	sdio_AggSettingTxUpdate(padapter); */
 
 	/*  Rx aggregation setting */
 	HalRxAggr8723BSdio(padapter);
@@ -636,7 +635,6 @@ u32 rtl8723bs_hal_init(struct adapter *padapter)
 	}
 
 	/*  Disable Interrupt first. */
-/*	rtw_hal_disable_interrupt(padapter); */
 
 	ret = _InitPowerOn_8723BS(padapter);
 	if (ret == _FAIL)
@@ -656,8 +654,6 @@ u32 rtl8723bs_hal_init(struct adapter *padapter)
 
 	rtl8723b_InitializeFirmwareVars(padapter);
 
-/*	SIC_Init(padapter); */
-
 	if (pwrctrlpriv->reg_rfoff)
 		pwrctrlpriv->rf_pwrstate = rf_off;
 
@@ -742,8 +738,6 @@ u32 rtl8723bs_hal_init(struct adapter *padapter)
 
 	/*  Record original value for template. This is arough data, we can only use the data */
 	/*  for power adjust. The value can not be adjustde according to different power!!! */
-/*	pHalData->OriginalCckTxPwrIdx = pHalData->CurrentCckTxPwrIdx; */
-/*	pHalData->OriginalOfdm24GTxPwrIdx = pHalData->CurrentOfdm24GTxPwrIdx; */
 
 	rtl8723b_InitAntenna_Selection(padapter);
 
@@ -786,7 +780,6 @@ u32 rtl8723bs_hal_init(struct adapter *padapter)
 	/* ack for xmit mgmt frames. */
 	rtw_write32(padapter, REG_FWHW_TXQ_CTRL, rtw_read32(padapter, REG_FWHW_TXQ_CTRL) | BIT(12));
 
-/*	pHalData->PreRpwmVal = SdioLocalCmd52Read1Byte(padapter, SDIO_REG_HRPWM1) & 0x80; */
 
 	{
 		pwrctrlpriv->rf_pwrstate = rf_on;
@@ -1068,20 +1061,18 @@ static void _ReadEfuseInfo8723BS(struct adapter *padapter)
 static void _ReadPROMContent(struct adapter *padapter)
 {
 	struct eeprom_priv *pEEPROM = GET_EEPROM_EFUSE_PRIV(padapter);
-	u8 eeValue;
+	u8 	eeValue;
 
 	eeValue = rtw_read8(padapter, REG_9346CR);
 	/*  To check system boot selection. */
 	pEEPROM->EepromOrEfuse = (eeValue & BOOT_FROM_EEPROM) ? true : false;
 	pEEPROM->bautoload_fail_flag = (eeValue & EEPROM_EN) ? false : true;
 
-/*	pHalData->EEType = IS_BOOT_FROM_EEPROM(Adapter) ? EEPROM_93C46 : EEPROM_BOOT_EFUSE; */
-
 	_ReadEfuseInfo8723BS(padapter);
 }
 
 /*  */
-/*	Description: */
+/* 	Description: */
 /*	Read HW adapter information by E-Fuse or EEPROM according CR9346 reported. */
 /*  */
 /*	Assumption: */
@@ -1144,7 +1135,7 @@ void SetHwReg8723BS(struct adapter *padapter, u8 variable, u8 *val)
 	case HW_VAR_SET_REQ_FW_PS:
 		{
 			u8 req_fw_ps = 0;
-
+			
 			req_fw_ps = rtw_read8(padapter, 0x8f);
 			req_fw_ps |= 0x10;
 			rtw_write8(padapter, 0x8f, req_fw_ps);
-- 
2.43.0