From: 전민식 <hmi.jeon@samsung.com>
To: "kbusch@kernel.org" <kbusch@kernel.org>,
"axboe@kernel.dk" <axboe@kernel.dk>
Cc: "sven@kernel.org" <sven@kernel.org>,
"j@jannau.net" <j@jannau.net>, "neal@gompa.dev" <neal@gompa.dev>,
"hch@lst.de" <hch@lst.de>, "sagi@grimberg.me" <sagi@grimberg.me>,
"justin.tee@broadcom.com" <justin.tee@broadcom.com>,
"nareshgottumukkala83@gmail.com" <nareshgottumukkala83@gmail.com>,
"paul.ely@broadcom.com" <paul.ely@broadcom.com>,
"kch@nvidia.com" <kch@nvidia.com>,
"linux-arm-kernel@lists.infradead.org"
<linux-arm-kernel@lists.infradead.org>,
"linux-nvme@lists.infradead.org" <linux-nvme@lists.infradead.org>,
"asahi@lists.linux.dev" <asahi@lists.linux.dev>,
"linux-kernel@vger.kernel.org" <linux-kernel@vger.kernel.org>,
전민식 <hmi.jeon@samsung.com>
Subject: [PATCH] nvme: Move nvme_setup_cmd before hot_pathing
Date: Fri, 20 Mar 2026 14:21:01 +0900 [thread overview]
Message-ID: <20260320052101epcms2p42ae135da60b36685e9b7fca6849b57a6@epcms2p4> (raw)
In-Reply-To: <CGME20260320052101epcms2p42ae135da60b36685e9b7fca6849b57a6@epcms2p4>
From e54937be5ca0a2b38fffe6611c360625dc0a8903 Mon Sep 17 00:00:00 2001
From: Minsik Jeon <hmi.jeon@samsung.com>
Date: Fri, 20 Mar 2026 14:48:07 +0900
Subject: [PATCH] nvme: Move nvme_setup_cmd before hot_pathing
we were checking host_pathing_error before calling nvme_setup_cmd().
This is caused the command setup to be skipped entirely when a pathing
error occurred, making it impossible to trace the nvme command via
trace_cmd nvme_complete_rq().
As a result, when nvme_complete_rq() logged a completion with cmdid=0,
it was impossible to correlate the completion with the nvme command
request.
This patch reorders the logic to first call nvme_setup_cmd(), then
perform the host_pathing_error check.
Co-authored-by: Beomsoo Kim <beomsooo.kim@samsung.com>
Co-authored-by: Eunsoo Lee <euns212.lee@samsung.com>
Co-authored-by: Steven Seungcheol Lee <sc108.lee@samsung.com>
Signed-off-by: Minsik Jeon <hmi.jeon@samsung.com>
---
drivers/nvme/host/apple.c | 6 +++---
drivers/nvme/host/fc.c | 8 ++++----
drivers/nvme/host/pci.c | 8 ++++----
drivers/nvme/host/rdma.c | 8 ++++----
drivers/nvme/host/tcp.c | 8 ++++----
drivers/nvme/target/loop.c | 6 +++---
6 files changed, 22 insertions(+), 22 deletions(-)
diff --git a/drivers/nvme/host/apple.c b/drivers/nvme/host/apple.c
index ed61b97fde59..2a28c992d024 100644
--- a/drivers/nvme/host/apple.c
+++ b/drivers/nvme/host/apple.c
@@ -783,13 +783,13 @@ static blk_status_t apple_nvme_queue_rq(struct blk_mq_hw_ctx *hctx,
if (unlikely(!READ_ONCE(q->enabled)))
return BLK_STS_IOERR;
- if (!nvme_check_ready(&anv->ctrl, req, true))
- return nvme_fail_nonready_command(&anv->ctrl, req);
-
ret = nvme_setup_cmd(ns, req);
if (ret)
return ret;
+ if (!nvme_check_ready(&anv->ctrl, req, true))
+ return nvme_fail_nonready_command(&anv->ctrl, req);
+
if (blk_rq_nr_phys_segments(req)) {
ret = apple_nvme_map_data(anv, req, cmnd);
if (ret)
diff --git a/drivers/nvme/host/fc.c b/drivers/nvme/host/fc.c
index e1bb4707183c..8ea37102a836 100644
--- a/drivers/nvme/host/fc.c
+++ b/drivers/nvme/host/fc.c
@@ -2762,14 +2762,14 @@ nvme_fc_queue_rq(struct blk_mq_hw_ctx *hctx,
u32 data_len;
blk_status_t ret;
- if (ctrl->rport->remoteport.port_state != FC_OBJSTATE_ONLINE ||
- !nvme_check_ready(&queue->ctrl->ctrl, rq, queue_ready))
- return nvme_fail_nonready_command(&queue->ctrl->ctrl, rq);
-
ret = nvme_setup_cmd(ns, rq);
if (ret)
return ret;
+ if (ctrl->rport->remoteport.port_state != FC_OBJSTATE_ONLINE ||
+ !nvme_check_ready(&queue->ctrl->ctrl, rq, queue_ready))
+ return nvme_fail_nonready_command(&queue->ctrl->ctrl, rq);
+
/*
* nvme core doesn't quite treat the rq opaquely. Commands such
* as WRITE ZEROES will return a non-zero rq payload_bytes yet
diff --git a/drivers/nvme/host/pci.c b/drivers/nvme/host/pci.c
index b78ba239c8ea..ad0363f7e681 100644
--- a/drivers/nvme/host/pci.c
+++ b/drivers/nvme/host/pci.c
@@ -1376,10 +1376,6 @@ static blk_status_t nvme_prep_rq(struct request *req)
iod->meta_total_len = 0;
iod->nr_dma_vecs = 0;
- ret = nvme_setup_cmd(req->q->queuedata, req);
- if (ret)
- return ret;
-
if (blk_rq_nr_phys_segments(req)) {
ret = nvme_map_data(req);
if (ret)
@@ -1418,6 +1414,10 @@ static blk_status_t nvme_queue_rq(struct blk_mq_hw_ctx *hctx,
if (unlikely(!test_bit(NVMEQ_ENABLED, &nvmeq->flags)))
return BLK_STS_IOERR;
+ ret = nvme_setup_cmd(req->q->queuedata, req);
+ if (ret)
+ return ret;
+
if (unlikely(!nvme_check_ready(&dev->ctrl, req, true)))
return nvme_fail_nonready_command(&dev->ctrl, req);
diff --git a/drivers/nvme/host/rdma.c b/drivers/nvme/host/rdma.c
index 57111139e84f..96248d81237e 100644
--- a/drivers/nvme/host/rdma.c
+++ b/drivers/nvme/host/rdma.c
@@ -2005,6 +2005,10 @@ static blk_status_t nvme_rdma_queue_rq(struct blk_mq_hw_ctx *hctx,
WARN_ON_ONCE(rq->tag < 0);
+ ret = nvme_setup_cmd(ns, rq);
+ if (ret)
+ return ret;
+
if (!nvme_check_ready(&queue->ctrl->ctrl, rq, queue_ready))
return nvme_fail_nonready_command(&queue->ctrl->ctrl, rq);
@@ -2020,10 +2024,6 @@ static blk_status_t nvme_rdma_queue_rq(struct blk_mq_hw_ctx *hctx,
ib_dma_sync_single_for_cpu(dev, sqe->dma,
sizeof(struct nvme_command), DMA_TO_DEVICE);
- ret = nvme_setup_cmd(ns, rq);
- if (ret)
- goto unmap_qe;
-
nvme_start_request(rq);
if (IS_ENABLED(CONFIG_BLK_DEV_INTEGRITY) &&
diff --git a/drivers/nvme/host/tcp.c b/drivers/nvme/host/tcp.c
index 243dab830dc8..1a3640e81b8f 100644
--- a/drivers/nvme/host/tcp.c
+++ b/drivers/nvme/host/tcp.c
@@ -2705,10 +2705,6 @@ static blk_status_t nvme_tcp_setup_cmd_pdu(struct nvme_ns *ns,
u8 hdgst = nvme_tcp_hdgst_len(queue), ddgst = 0;
blk_status_t ret;
- ret = nvme_setup_cmd(ns, rq);
- if (ret)
- return ret;
-
req->state = NVME_TCP_SEND_CMD_PDU;
req->status = cpu_to_le16(NVME_SC_SUCCESS);
req->offset = 0;
@@ -2768,6 +2764,10 @@ static blk_status_t nvme_tcp_queue_rq(struct blk_mq_hw_ctx *hctx,
bool queue_ready = test_bit(NVME_TCP_Q_LIVE, &queue->flags);
blk_status_t ret;
+ ret = nvme_setup_cmd(ns, rq);
+ if (ret)
+ return ret;
+
if (!nvme_check_ready(&queue->ctrl->ctrl, rq, queue_ready))
return nvme_fail_nonready_command(&queue->ctrl->ctrl, rq);
diff --git a/drivers/nvme/target/loop.c b/drivers/nvme/target/loop.c
index 4b3f4f11928d..475b532d08e8 100644
--- a/drivers/nvme/target/loop.c
+++ b/drivers/nvme/target/loop.c
@@ -140,13 +140,13 @@ static blk_status_t nvme_loop_queue_rq(struct blk_mq_hw_ctx *hctx,
bool queue_ready = test_bit(NVME_LOOP_Q_LIVE, &queue->flags);
blk_status_t ret;
- if (!nvme_check_ready(&queue->ctrl->ctrl, req, queue_ready))
- return nvme_fail_nonready_command(&queue->ctrl->ctrl, req);
-
ret = nvme_setup_cmd(ns, req);
if (ret)
return ret;
+ if (!nvme_check_ready(&queue->ctrl->ctrl, req, queue_ready))
+ return nvme_fail_nonready_command(&queue->ctrl->ctrl, req);
+
nvme_start_request(req);
iod->cmd.common.flags |= NVME_CMD_SGL_METABUF;
iod->req.port = queue->ctrl->port;
--
2.52.0
next parent reply other threads:[~2026-03-20 5:21 UTC|newest]
Thread overview: 19+ messages / expand[flat|nested] mbox.gz Atom feed top
[not found] <CGME20260320052101epcms2p42ae135da60b36685e9b7fca6849b57a6@epcms2p4>
2026-03-20 5:21 ` 전민식 [this message]
2026-03-20 13:43 ` Kanchan Joshi
2026-03-22 7:16 ` kernel test robot
2026-03-22 8:22 ` kernel test robot
2026-03-22 12:09 ` kernel test robot
[not found] ` <CGME20260320052101epcms2p42ae135da60b36685e9b7fca6849b57a6@epcms2p3>
2026-03-23 1:04 ` [PATCH v2] " 전민식
2026-03-24 23:55 ` [PATCH] " Justin Tee
[not found] ` <CGME20260320052101epcms2p42ae135da60b36685e9b7fca6849b57a6@epcms2p6>
2026-03-25 6:33 ` [PATCH v3] nvme: Add nvme_setup_cmd to host_path_error 전민식
2026-03-25 18:37 ` Justin Tee
2026-03-25 19:03 ` Keith Busch
[not found] ` <CGME20260320052101epcms2p42ae135da60b36685e9b7fca6849b57a6@epcms2p1>
2026-03-26 1:44 ` [PATCH v4] nvme: Skip trace complete_rq on host path error 전민식
2026-03-26 6:14 ` hch
[not found] ` <CGME20260320052101epcms2p42ae135da60b36685e9b7fca6849b57a6@epcms2p5>
2026-03-26 6:51 ` [PATCH v5] " 전민식
2026-03-26 14:20 ` hch
2026-03-26 14:28 ` Keith Busch
2026-03-26 14:31 ` hch
2026-03-26 14:43 ` Keith Busch
2026-03-27 6:19 ` 전민식
2026-03-27 6:37 ` 전민식
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260320052101epcms2p42ae135da60b36685e9b7fca6849b57a6@epcms2p4 \
--to=hmi.jeon@samsung.com \
--cc=asahi@lists.linux.dev \
--cc=axboe@kernel.dk \
--cc=hch@lst.de \
--cc=j@jannau.net \
--cc=justin.tee@broadcom.com \
--cc=kbusch@kernel.org \
--cc=kch@nvidia.com \
--cc=linux-arm-kernel@lists.infradead.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nvme@lists.infradead.org \
--cc=nareshgottumukkala83@gmail.com \
--cc=neal@gompa.dev \
--cc=paul.ely@broadcom.com \
--cc=sagi@grimberg.me \
--cc=sven@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®