From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-lj1-f169.google.com (mail-lj1-f169.google.com [209.85.208.169]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 9B52B3FE64E for ; Tue, 24 Mar 2026 13:54:52 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.208.169 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1774360495; cv=none; b=C0LeMirvwi40dWH+SrLEMhS04ILJlvhO2+m3PIWb4DP82mSCdAY8dEBs9ybhdnx0UOycXaekdsY0FIPHfwIkElHWCjadYT+75fBM/rub41itUn/3+MUwQ2z4urEDkoW3kU6sg+Ky0B9NaDB7S7Pqzjj23sNvnBmTiAv0x2BGYx0= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1774360495; c=relaxed/simple; bh=GuWaYKwfMV3ENq2uAbPKaKDYJ6qhLIPVj7+qDo+zpgI=; h=From:Date:Subject:MIME-Version:Content-Type:Message-Id:References: In-Reply-To:To:Cc; b=Q5zOw4R1xelGOdzP/MxUaAufP+whTWgyvw7hsbRvVJecm0y3XwStTbiBBmJ9Ff+OvyjtqQLWKfXtgn5IyVa9pYBb6V69amPsfiHyx1TDpdVLxlNGIRaEv8da5q4eI9rEratDhKBGeUXY8EjraHUOb0F7RmY5wIH6WxZ3cB/vbUo= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=PzHvR1h5; arc=none smtp.client-ip=209.85.208.169 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="PzHvR1h5" Received: by mail-lj1-f169.google.com with SMTP id 38308e7fff4ca-386b553c70eso39594131fa.0 for ; Tue, 24 Mar 2026 06:54:52 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20251104; t=1774360490; x=1774965290; darn=vger.kernel.org; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:from:to:cc:subject:date:message-id :reply-to; bh=4eVM5njdwmLVkvkbsPkw/voN/xq5dei4oewrLsHcno0=; b=PzHvR1h5dHxr7kVQCZcb34dqA+c0EPB8fRH92JXCF9y8+eo8C9YK0o5H2NuPIJyu/8 dYx/zavh9/mMp6MwGvilS2+KCdBHmixr+QnLjfMpAKRulm9K8xMnb5BhIQ7S5txR114s Ktk8+XAaI5fc+lq7VGbnG83HBor5EgjF0tEHtsNWOKT+0+7IgyysvPBZGrALU5t4dsPO +sFV4aj0FI02bZuVCeEZF5DxMhRK3tHNXcUV7g+0OWflZ8FeOzxFWy6KqER7YS/QwELh cAa4ldoj0Sg2Qb9oSzb02PBTwBXIxYy5Xbdp8xdHoiE04PRpt2CkFPPECQWpr1mz00K0 c6+w== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20251104; t=1774360491; x=1774965291; h=cc:to:in-reply-to:references:message-id:content-transfer-encoding :mime-version:subject:date:from:x-gm-gg:x-gm-message-state:from:to :cc:subject:date:message-id:reply-to; bh=4eVM5njdwmLVkvkbsPkw/voN/xq5dei4oewrLsHcno0=; b=bQjWf6l3DQuToC6GoNHjgL5zi9qHY2Y4TMgLFyq+ScLxIY5DIKQwYSlWjoMDeNLWqw //iyF3icpKd01dCqDc6PLiI23/XgeHTWVRI+EGJKNMqz717HElivAq5BqZBSWS1fQo5B TIXRmLFKs5J4Ow386K8cL9OlMgTluDnKvMEL+/c28K2dUtsmhLU/u5euWSlgfKrwpAYo ZRGQrDornq4OtIRu3Xgtdt9MUNleBqPljV4CAon9Yd4x8yLFvVly50D5ygluaJpAtiK2 7zfjivXU1x1ANcU+8saAoggLQpNldN1kCvbTvsPQLgBXL48RJONoj7atYzuLFQJ+iQEb Hq9g== X-Forwarded-Encrypted: i=1; AJvYcCVRFAY9z+DQkbQnkHtwMpkOekY6xb0Syc8GAacNHq7fJwK3FRGVn3YrH5O7hXazSTs18V8UhtD85XqL4Ds=@vger.kernel.org X-Gm-Message-State: AOJu0Yxgg32M30cPezXxA2id+RNJzffzP8JBk+B3m2lKoSYmkvfjIXRc /rDdC3hT4Hw3eKB8FmVp2wvRP3o8aPvAcaMvV/35oU79MjgeEPgHOhuJ X-Gm-Gg: ATEYQzwevmZFOLkvWyXij2FmjRqqXnAKRfHa7WZ7d340+3p9ij1ZuHoBUe72J1zE7MN /jb1awU9+gzajQ4gpiJDEFjdKAXN4cZZKFS6HigRbBB5nzvpwwCIpqLtq8cwhMPI03YVgSv2LIx JZ3keoOJ3c8A3jUcgql57M/75Cj2GOqVFuaoeHABupkfD1ffOX/EPaooR162GCqS1DIlkQV7qMH qitPG2Jy39VVHFq2lvRXpdYTOb0ORlbK9YYRG1Eve8GnWQjxAtnvlDZUp14kzZaPnPOLKhVxNqX QdVwJ9wpx2hl7sTWaxR4x47pFZacTp84gH9gR7gg6JNnMR9+E76TtRG6nUZg/6GorHIMepGqwij ldx/nUJZYvcVZVlY6oIcJdR0YJxLydKpvQfhEMnqj5DL+oU4j1h4v+NrWxAycDFhOj4DlXoXgkf G95dDkxwx8mayGXHPMKq598NLDvcXMRdkThTaSdHa7CqsRMAPVWm1QoEvCL2+h1pn+jZDg X-Received: by 2002:a05:6512:2244:b0:5a1:58d3:a78e with SMTP id 2adb3069b0e04-5a285afe997mr5521719e87.16.1774360490303; Tue, 24 Mar 2026 06:54:50 -0700 (PDT) Received: from [192.168.1.135] (83-233-6-197.cust.bredband2.com. [83.233.6.197]) by smtp.gmail.com with ESMTPSA id 2adb3069b0e04-5a285207454sm3162823e87.48.2026.03.24.06.54.48 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Tue, 24 Mar 2026 06:54:49 -0700 (PDT) From: Marcus Folkesson Date: Tue, 24 Mar 2026 14:54:19 +0100 Subject: [PATCH v9 5/5] docs: i2c: i2c-topology: add section about bus speed Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 7bit Message-Id: <20260324-i2c-mux-v9-5-5292b0608243@gmail.com> References: <20260324-i2c-mux-v9-0-5292b0608243@gmail.com> In-Reply-To: <20260324-i2c-mux-v9-0-5292b0608243@gmail.com> To: Wolfram Sang , Peter Rosin , Michael Hennerich , Bartosz Golaszewski , Andi Shyti , Andy Shevchenko , Bartosz Golaszewski Cc: linux-i2c@vger.kernel.org, linux-kernel@vger.kernel.org, linux-arm-kernel@lists.infradead.org, Marcus Folkesson X-Mailer: b4 0.14.3 X-Developer-Signature: v=1; a=openpgp-sha256; l=8169; i=marcus.folkesson@gmail.com; h=from:subject:message-id; bh=GuWaYKwfMV3ENq2uAbPKaKDYJ6qhLIPVj7+qDo+zpgI=; b=owEBbQKS/ZANAwAKAYiATm9ZXVIyAcsmYgBpwpegtwHxJOynPPBbWU/7VFhGEIzuMIL/Aqc6/ e2v/aBzLS2JAjMEAAEKAB0WIQQFUaLotmy1TWTBLGWIgE5vWV1SMgUCacKXoAAKCRCIgE5vWV1S MiWLEADcTDlo96dNktCHucsX4wxFTvWqQz+/jzYJ6A7WebX+7gMIKlNQyN2TRdddkrastNt2Ffm 9tgBWrvkpMDAld2okAN+w92oVXZx6mc/41A4hSycbKrW5rcySOYAVo9ZHi1dv33aAWOd5U97+ui ffW+uOlg9dbYZOYS1lbuLelB62NUMBaC8uooCCsx3elqhfQ206jf8y7xZbI14s+1TmT9D+fJ7PK WHh5WUbHhcrZbjhTK3R6QsZOoTZkL0JfFaKfx8fKgRWGwgLdYwuLPDQOe7zIl+NbXfe5PeaT1eh /JiTPrdpVaNvsx0fizNN/rkq6bAqZ4C65GvW6+J/Rm7fS4/rVIbGIbU3WMKrgWbaRrUYX3o1sqb 70vtE4xp8jilCU9pcMgnDuzfqjZYCHkb+0wziEFNlP5A6awv5CX3qIUne4c0bUCEQtsxruNiAg0 3vJAHXabmAtLTa2jqXXAXahgF9hYXRENdV3lKStlYvAoj4+GUyTxQYwmHTHBC4ISh7w4CMuBrJD qIMY7rQlp4DSX3UVrAs4ccSUzLdJwyy5RbupsNjCoolq88j1Y2pEA5YDrjelOEW7nuUX2NHXcJK UWqYqbwYrvO6E8ppxkkqUgeIIGoISAwfsoUjJLA0FdCc6Wpvcb91GFODHosoMQM74uPHEpVre+C +4A7DBoe9ZCyUwQ== X-Developer-Key: i=marcus.folkesson@gmail.com; a=openpgp; fpr=AB91D46C7E0F6E6FB2AB640EC0FE25D598F6C127 Describe what needs to be consideraed and taken into account when using different bus speeds for different mux channels. Signed-off-by: Marcus Folkesson --- Documentation/i2c/i2c-topology.rst | 178 +++++++++++++++++++++++++++++++++++++ 1 file changed, 178 insertions(+) diff --git a/Documentation/i2c/i2c-topology.rst b/Documentation/i2c/i2c-topology.rst index 48fce0f7491b..24df553ca8c7 100644 --- a/Documentation/i2c/i2c-topology.rst +++ b/Documentation/i2c/i2c-topology.rst @@ -367,6 +367,184 @@ When D1 or D2 are accessed, accesses to D3 and D4 are locked out while accesses to D5 may interleave. When D3 or D4 are accessed, accesses to all other devices are locked out. +Bus Speed and I2C Multiplexers +================================ + +I2C bus multiplexers allow multiple downstream channels to be exposed +as separate I2C adapters which also could set their own bus speed. + +The multiplexer itself cannot change the bus speed as it use the upstream +clock and data lines to communicate with the downstream devices. The speed +is therefore changed in the root adapter resulting in that the whole bus is +affected. + +This increases the complexity of the topology and some considerations must +be taken into account. + +Bus speed +---------- + +Downstream channels of an I2C multiplexer can only operate at the same or +lower bus speed as the upstream bus. This is because the upstream bus may +have devices that cannot operate at higher speeds and those will be affected +by the speed change. + +The example below illustrates the problem. +The root adapter is operating at 100kHz. D2 can only operate with 100kHz, +but D1 can operate at 400kHz. When D1 is selected, the bus speed of the +root adapter would have to be set to 400kHz, a speed that D2 may not support. + +This topology is therefor not allowed: :: + + .----------. 400kHz .--------. + .--------. 100kHz | mux- |--------| dev D1 | + | root |--+-----| locked | '--------' + '--------' | | mux M1 | + | '----------' + | .--------. + '--| dev D2 | + '--------' + + +This topology is allowed: :: + + .----------. 100kHz .--------. + .--------. 400kHz | mux- |--------| dev D2 | + | root |--+-----| locked | '--------' + '--------' | mux M1 |--. 400kHz .--------. + '----------' '--------| dev D1 | + '--------' + +Preferred topology +------------------- + +The preferred topology when using different bus speeds is to have the multiplexer +connected directly to the root adapter without any devices as siblings. +By this arrangement, the bus speed can be changed without affecting any other devices +and many of the caveats are avoided. + +Other multiplexers in parallel is still okay as those are locked out during transfers. + +This is the preferred topology: :: + + .----------. 100kHz .--------. + .--------. 400kHz | mux- |--------| dev D2 | + | root |--+-----| locked | '--------' + '--------' | mux M1 |--. 400kHz .--------. + '----------' '--------| dev D1 | + '--------' + +Locking +-------- + +If the multiplexer is mux-locked, transfers to D3 may interleave between the +select-transfer-deselect to D1 or D2. +This results in a situation where the bus speed to D3 may be lower than it +is supposed to be. This is usually not a problem. + +This topology is allowed but some transfers to D3 may be at 100kHz: :: + + .----------. 100kHz .--------. + .--------. 400kHz | mux- |--------| dev D1 | + | root |--+-----| locked | '--------' + '--------' | | mux M1 |--. 400kHz .--------. + | '----------' '--------| dev D2 | + | .--------. '--------' + '--| dev D3 | + '--------' + +Multiple muxes in series +-------------------------- + +When multiple muxes are used in series the same rules applies. + +Transfers to D3 may interleave between select-transfer-deselect to D1, which +results that the bus speed to D2 or D3 will be at 100KHz. + +Transfers to D2 may interleave between select-transfer-deselect to D1, which +results in that the bus speed to D1 may be at 400kHz as the transfer to D2 +will set the bus speed to before the transfer to D1 starts. + +This is probably a bad topology :: + + .----------. 400kHz .----------. 100kHz .--------. + .--------.400kHz | mux- |--------| mux- |--------| dev D1 | + | root |--+----| locked | 400kHz | locked | '--------' + '--------' | | mux M1 |--. | mux M2 | + | '----------' | '----------' + | .--------. | .--------. + '--| dev D3 | '--| dev D2 | + '--------' '--------' + +Multiple muxes in parallel +---------------------------- + +When multiple muxes are used in parallel all access to other muxes are locked out +so this is not a problem. + +If the muxes are mux-locked, access to D3 may still interleave though. + +In the example below, D3 may not interleave between select-transfer-deselect for D1 +or D2 as both muxes are parent-locked: :: + + + .----------. 100kHz .--------. + | parent- |----------| dev D1 | + .--| locked | '--------' + | | mux M1 | + | '----------' + | .----------. 400KHz .--------. + .--------. 400kHz | parent- |---------| dev D2 | + | root |--+------| locked | '--------' + '--------' | | mux M2 | + | '----------' + | .--------. + '--| dev D3 | + '--------' + +Idle state +----------- + +Muxes have an idle state, which is the state the channels are put into when no channel +is active. The state is typically one of the following: + +- All channels are disconnected +- The last selected channel is left as-is +- A predefined channel is selected + +Muxes that support an idle state where all channels are disconnected are preferred when using +different bus speeds. Otherwise high bus speeds may "leak" through to devices that +may not support that higher speed. + +Consider the following example: :: + + .----------. 100kHz .--------. + .--------. 400kHz | mux- |--------| dev D1 | + | root |--+-----| locked | '--------' + '--------' | | mux M1 |--. 400kHz .--------. + | '----------' '--------| dev D2 | + | .--------. '--------' + '--| dev D3 | + '--------' + +If the idle state of M1 is: + +- All channels disconnected: No problem, D1 and D2 are not affected by communication + to D3. +- Last selected channel: Problem if D1 was the last selected channel. High speed + communication to D3 will be "leaked" to D1. +- Predefined channel: Problem if the predefined channel D1. Set predefined channel + to D2 as D2 may handle 400kHz. + +Supported controllers +----------------------- + +Not all I2C controllers support setting the bus speed dynamically. +At the time of writing, the following controllers have support: + +============================ ============================================= +i2c-davinci Supports dynamic bus speed +============================ ============================================= Mux type of existing device drivers =================================== -- 2.53.0