From: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
To: Linus Walleij <linusw@kernel.org>,
Bartosz Golaszewski <brgl@kernel.org>,
Mika Westerberg <mika.westerberg@linux.intel.com>,
Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Cc: linux-gpio@vger.kernel.org, linux-kernel@vger.kernel.org,
Geert Uytterhoeven <geert@linux-m68k.org>,
Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
Subject: [PATCH] gpiolib: fix hogs with multiple lines
Date: Wed, 25 Mar 2026 11:18:32 +0100 [thread overview]
Message-ID: <20260325-gpio-hogs-multiple-v1-1-7e3a7347f0d6@oss.qualcomm.com> (raw)
After moving GPIO hog handling into GPIOLIB core, we accidentally stopped
supporting devicetree hog definitions with multiple lines like so:
hog {
gpio-hog;
gpios = <3 0>, <4 GPIO_ACTIVE_LOW>;
output-high;
line-name = "foo";
};
Restore this functionality to fix reported regressions.
Fixes: d1d564ec4992 ("gpio: move hogs into GPIO core")
Reported-by: Geert Uytterhoeven <geert@linux-m68k.org>
Closes: https://lore.kernel.org/all/CAMuHMdX6RuZXAozrF5m625ZepJTVVr4pcyKczSk12MedWvoejw@mail.gmail.com/
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
---
drivers/gpio/gpiolib.c | 84 +++++++++++++++++++++++++++-----------------------
1 file changed, 46 insertions(+), 38 deletions(-)
diff --git a/drivers/gpio/gpiolib.c b/drivers/gpio/gpiolib.c
index 7ee45ccdf1265e94b68fe8fa0d10dbc6adccd93a..fd2821463ddc9fe047fecb3d89b018b5e23b925c 100644
--- a/drivers/gpio/gpiolib.c
+++ b/drivers/gpio/gpiolib.c
@@ -938,12 +938,12 @@ int gpiochip_add_hog(struct gpio_chip *gc, struct fwnode_handle *fwnode)
struct fwnode_handle *gc_node = dev_fwnode(&gc->gpiodev->dev);
struct fwnode_reference_args gpiospec;
enum gpiod_flags dflags;
+ const char *name = NULL;
struct gpio_desc *desc;
unsigned long lflags;
- const char *name;
+ size_t num_hogs;
int ret, argc;
- u32 gpios[3]; /* We support up to three-cell bindings. */
- u32 cells;
+ u32 cells = 0;
lflags = GPIO_LOOKUP_FLAGS_DEFAULT;
dflags = GPIOD_ASIS;
@@ -952,43 +952,21 @@ int gpiochip_add_hog(struct gpio_chip *gc, struct fwnode_handle *fwnode)
argc = fwnode_property_count_u32(fwnode, "gpios");
if (argc < 0)
return argc;
- if (argc > 3)
+
+ ret = fwnode_property_read_u32(gc_node, "#gpio-cells", &cells);
+ if ((ret && is_of_node(fwnode)) || (!ret && (argc % cells)))
return -EINVAL;
+ num_hogs = ret ? 1 : (argc / cells);
+
+ u32 *gpios __free(kfree) = kcalloc(argc, sizeof(u32), GFP_KERNEL);
+ if (!gpios)
+ return -ENOMEM;
+
ret = fwnode_property_read_u32_array(fwnode, "gpios", gpios, argc);
if (ret < 0)
return ret;
- if (is_of_node(fwnode)) {
- /*
- * OF-nodes need some additional special handling for
- * translating of devicetree flags.
- */
- ret = fwnode_property_read_u32(gc_node, "#gpio-cells", &cells);
- if (ret)
- return ret;
- if (!ret && argc != cells)
- return -EINVAL;
-
- memset(&gpiospec, 0, sizeof(gpiospec));
- gpiospec.fwnode = fwnode;
- gpiospec.nargs = argc;
-
- for (int i = 0; i < argc; i++)
- gpiospec.args[i] = gpios[i];
-
- ret = of_gpiochip_get_lflags(gc, &gpiospec, &lflags);
- if (ret)
- return ret;
- } else {
- /*
- * GPIO_ACTIVE_LOW is currently the only lookup flag
- * supported for non-OF firmware nodes.
- */
- if (gpios[1])
- lflags |= GPIO_ACTIVE_LOW;
- }
-
if (fwnode_property_present(fwnode, "input"))
dflags |= GPIOD_IN;
else if (fwnode_property_present(fwnode, "output-low"))
@@ -1000,11 +978,41 @@ int gpiochip_add_hog(struct gpio_chip *gc, struct fwnode_handle *fwnode)
fwnode_property_read_string(fwnode, "line-name", &name);
- desc = gpiochip_get_desc(gc, gpios[0]);
- if (IS_ERR(desc))
- return PTR_ERR(desc);
+ for (unsigned int i = 0; i < num_hogs; i++) {
+ if (is_of_node(fwnode)) {
+ /*
+ * OF-nodes need some additional special handling for
+ * translating of devicetree flags.
+ */
+ memset(&gpiospec, 0, sizeof(gpiospec));
+ gpiospec.fwnode = fwnode;
+ gpiospec.nargs = cells;
+
+ for (int j = 0; j < cells; j++)
+ gpiospec.args[j] = gpios[i * cells + j];
+
+ ret = of_gpiochip_get_lflags(gc, &gpiospec, &lflags);
+ if (ret)
+ return ret;
+ } else {
+ /*
+ * GPIO_ACTIVE_LOW is currently the only lookup flag
+ * supported for non-OF firmware nodes.
+ */
+ if (gpios[i * cells + 1])
+ lflags |= GPIO_ACTIVE_LOW;
+ }
- return gpiod_hog(desc, name, lflags, dflags);
+ desc = gpiochip_get_desc(gc, gpios[i * cells]);
+ if (IS_ERR(desc))
+ return PTR_ERR(desc);
+
+ ret = gpiod_hog(desc, name, lflags, dflags);
+ if (ret)
+ return ret;
+ }
+
+ return 0;
}
static int gpiochip_hog_lines(struct gpio_chip *gc)
---
base-commit: 04310bd443d4a09a486c0bcd7a767e32400eca77
change-id: 20260325-gpio-hogs-multiple-1718d38c1f5b
Best regards,
--
Bartosz Golaszewski <bartosz.golaszewski@oss.qualcomm.com>
next reply other threads:[~2026-03-25 10:18 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-25 10:18 Bartosz Golaszewski [this message]
2026-03-25 12:26 ` Andy Shevchenko
2026-03-25 18:41 ` Geert Uytterhoeven
2026-03-26 13:54 ` Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260325-gpio-hogs-multiple-v1-1-7e3a7347f0d6@oss.qualcomm.com \
--to=bartosz.golaszewski@oss.qualcomm.com \
--cc=andriy.shevchenko@linux.intel.com \
--cc=brgl@kernel.org \
--cc=geert@linux-m68k.org \
--cc=linusw@kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=mika.westerberg@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®