From: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, aastha.pandey@oss.qualcomm.com,
dipa.mantre@oss.qualcomm.com,
Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>,
Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>,
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Subject: [PATCH v2] arm64: dts: qcom: sm8750: Enable TSENS and thermal zones
Date: Wed, 25 Mar 2026 16:50:00 +0530 [thread overview]
Message-ID: <20260325-sm8750_tsens-v2-1-8a554e54dc1b@oss.qualcomm.com> (raw)
From: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>
The sm8750 includes four TSENS instances, with a total of 47 thermal
sensors distributed across various locations on the SoC.
The TSENS max/reset threshold is configured to 130°C in the hardware.
Enable all TSENS instances, and define the thermal zones with a hot trip
at 120°C and critical trip at 125°C.
Signed-off-by: Manaf Meethalavalappu Pallikunhi <quic_manafm@quicinc.com>
Signed-off-by: Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
---
Changes in v2:
- Fix tsens order in device tree file.
- Add R-B from Konrad.
- Link to v1: https://lore.kernel.org/r/20260313-sm8750_tsens-v1-0-250fcc3794a2@oss.qualcomm.com
---
arch/arm64/boot/dts/qcom/sm8750.dtsi | 897 +++++++++++++++++++++++++++++++++++
1 file changed, 897 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
index 8b1b51558dcb..18fb52c14acd 100644
--- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
@@ -22,6 +22,7 @@
#include <dt-bindings/soc/qcom,gpr.h>
#include <dt-bindings/soc/qcom,rpmh-rsc.h>
#include <dt-bindings/sound/qcom,q6dsp-lpass-ports.h>
+#include <dt-bindings/thermal/thermal.h>
/ {
interrupt-parent = <&intc>;
@@ -3447,6 +3448,54 @@ pdc: interrupt-controller@b220000 {
interrupt-controller;
};
+ tsens0: thermal-sensor@c228000 {
+ compatible = "qcom,sm8750-tsens", "qcom,tsens-v2";
+ reg = <0x0 0x0c228000 0x0 0x1000>,
+ <0x0 0x0c222000 0x0 0x1000>;
+ interrupts = <GIC_SPI 771 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 484 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+ #qcom,sensors = <15>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens1: thermal-sensor@c229000 {
+ compatible = "qcom,sm8750-tsens", "qcom,tsens-v2";
+ reg = <0x0 0x0c229000 0x0 0x1000>,
+ <0x0 0x0c223000 0x0 0x1000>;
+ interrupts = <GIC_SPI 772 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 485 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+ #qcom,sensors = <7>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens2: thermal-sensor@c22a000 {
+ compatible = "qcom,sm8750-tsens", "qcom,tsens-v2";
+ reg = <0x0 0x0c22a000 0x0 0x1000>,
+ <0x0 0x0c224000 0x0 0x1000>;
+ interrupts = <GIC_SPI 773 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 486 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+ #qcom,sensors = <16>;
+ #thermal-sensor-cells = <1>;
+ };
+
+ tsens3: thermal-sensor@c22b000 {
+ compatible = "qcom,sm8750-tsens", "qcom,tsens-v2";
+ reg = <0x0 0x0c22b000 0x0 0x1000>,
+ <0x0 0x0c225000 0x0 0x1000>;
+ interrupts = <GIC_SPI 774 IRQ_TYPE_LEVEL_HIGH>,
+ <GIC_SPI 487 IRQ_TYPE_LEVEL_HIGH>;
+ interrupt-names = "uplow",
+ "critical";
+ #qcom,sensors = <9>;
+ #thermal-sensor-cells = <1>;
+ };
+
aoss_qmp: power-management@c300000 {
compatible = "qcom,sm8750-aoss-qmp", "qcom,aoss-qmp";
reg = <0x0 0x0c300000 0x0 0x400>;
@@ -5893,6 +5942,854 @@ compute-cb@14 {
};
};
+ thermal-zones {
+ aoss0-thermal {
+ thermal-sensors = <&tsens0 0>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ aoss0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-0-0-0-thermal {
+ thermal-sensors = <&tsens0 1>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ cpu-0-0-0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-0-0-1-thermal {
+ thermal-sensors = <&tsens0 2>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ cpu-0-0-1-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-0-1-0-thermal {
+ thermal-sensors = <&tsens0 3>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ cpu-0-1-0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-0-1-1-thermal {
+ thermal-sensors = <&tsens0 4>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ cpu-0-1-1-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-0-2-0-thermal {
+ thermal-sensors = <&tsens0 5>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ cpu-0-2-0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-0-2-1-thermal {
+ thermal-sensors = <&tsens0 6>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ cpu-0-2-1-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-0-3-0-thermal {
+ thermal-sensors = <&tsens0 7>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ cpu-0-3-0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-0-3-1-thermal {
+ thermal-sensors = <&tsens0 8>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ cpu-0-3-1-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-0-4-0-thermal {
+ thermal-sensors = <&tsens0 9>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ cpu-0-4-0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-0-4-1-thermal {
+ thermal-sensors = <&tsens0 10>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ cpu-0-4-1-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-0-5-0-thermal {
+ thermal-sensors = <&tsens0 11>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ cpu-0-5-0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-0-5-1-thermal {
+ thermal-sensors = <&tsens0 12>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ cpu-0-5-1-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss-0-0-thermal {
+ thermal-sensors = <&tsens0 13>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ cpuss-0-0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss-0-1-thermal {
+ thermal-sensors = <&tsens0 14>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ cpuss-0-1-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ aoss1-thermal {
+ thermal-sensors = <&tsens1 0>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ aoss1-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-1-0-0-thermal {
+ thermal-sensors = <&tsens1 1>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ cpu-1-0-0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-1-0-1-thermal {
+ thermal-sensors = <&tsens1 2>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ cpu-1-0-1-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-1-1-0-thermal {
+ thermal-sensors = <&tsens1 3>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ cpu-1-1-0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpu-1-1-1-thermal {
+ thermal-sensors = <&tsens1 4>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ cpu-1-1-1-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss-1-0-thermal {
+ thermal-sensors = <&tsens1 5>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ cpuss-1-0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ cpuss-1-1-thermal {
+ thermal-sensors = <&tsens1 6>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ cpuss-1-1-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ aoss2-thermal {
+ thermal-sensors = <&tsens2 0>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ aoss2-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss0-thermal {
+ thermal-sensors = <&tsens2 1>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ gpuss0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss1-thermal {
+ thermal-sensors = <&tsens2 2>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ gpuss1-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss2-thermal {
+ thermal-sensors = <&tsens2 3>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ gpuss2-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss3-thermal {
+ thermal-sensors = <&tsens2 4>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ gpuss3-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss4-thermal {
+ thermal-sensors = <&tsens2 5>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ gpuss4-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss5-thermal {
+ thermal-sensors = <&tsens2 6>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ gpuss5-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss6-thermal {
+ thermal-sensors = <&tsens2 7>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ gpuss6-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ gpuss7-thermal {
+ thermal-sensors = <&tsens2 8>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ gpuss7-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ modem0-thermal {
+ thermal-sensors = <&tsens2 9>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ modem0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ modem1-thermal {
+ thermal-sensors = <&tsens2 10>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ modem1-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ modem2-thermal {
+ thermal-sensors = <&tsens2 11>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ modem2-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ modem3-thermal {
+ thermal-sensors = <&tsens2 12>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ modem3-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ camera0-thermal {
+ thermal-sensors = <&tsens2 13>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ camera0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ camera1-thermal {
+ thermal-sensors = <&tsens2 14>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ camera1-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ video-thermal {
+ thermal-sensors = <&tsens2 15>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ video-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ aoss3-thermal {
+ thermal-sensors = <&tsens3 0>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ aoss3-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsphvx0-thermal {
+ thermal-sensors = <&tsens3 1>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ nsphvx0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsphvx1-thermal {
+ thermal-sensors = <&tsens3 2>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ nsphvx1-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsphvx2-thermal {
+ thermal-sensors = <&tsens3 3>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ nsphvx2-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsphmx0-thermal {
+ thermal-sensors = <&tsens3 4>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ nsphmx0-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsphmx1-thermal {
+ thermal-sensors = <&tsens3 5>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ nsphmx1-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsphmx2-thermal {
+ thermal-sensors = <&tsens3 6>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ nsphmx2-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ nsphmx3-thermal {
+ thermal-sensors = <&tsens3 7>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <5000>;
+ type = "hot";
+ };
+
+ nsphmx3-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+
+ ddr-thermal {
+ thermal-sensors = <&tsens3 8>;
+
+ trips {
+ trip-point0 {
+ temperature = <120000>;
+ hysteresis = <2000>;
+ type = "hot";
+ };
+
+ ddr-critical {
+ temperature = <125000>;
+ hysteresis = <0>;
+ type = "critical";
+ };
+ };
+ };
+ };
+
timer {
compatible = "arm,armv8-timer";
---
base-commit: 85964cdcad0fac9a0eb7b87a0f9d88cc074b854c
change-id: 20260309-sm8750_tsens-59f9e363b996
Best regards,
--
Gaurav Kohli <gaurav.kohli@oss.qualcomm.com>
next reply other threads:[~2026-03-25 11:20 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-03-25 11:20 Gaurav Kohli [this message]
2026-03-26 3:19 ` Bjorn Andersson
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260325-sm8750_tsens-v2-1-8a554e54dc1b@oss.qualcomm.com \
--to=gaurav.kohli@oss.qualcomm.com \
--cc=aastha.pandey@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dipa.mantre@oss.qualcomm.com \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=quic_manafm@quicinc.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®