From: Joe Sandom via B4 Relay <devnull+jsandom.axon.com@kernel.org>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, Joe Sandom <jsandom@axon.com>
Subject: [PATCH 1/5] arm64: dts: qcom: sm8550: add PCIe MHI register regions and port labels
Date: Sat, 04 Apr 2026 10:50:54 +0100 [thread overview]
Message-ID: <20260404-rb5gen2-dts-v1-1-895f8fc494fc@axon.com> (raw)
In-Reply-To: <20260404-rb5gen2-dts-v1-0-895f8fc494fc@axon.com>
From: Joe Sandom <jsandom@axon.com>
Add the MHI register regions to the pcie0 and pcie1 controller nodes
so that the MHI bus layer can access controller registers directly.
Also add labels to the root port nodes (pcie0_port0, pcie1_port0) to
allow board DTS files to reference them for adding endpoint devices
to each pcie root port.
Signed-off-by: Joe Sandom <jsandom@axon.com>
---
arch/arm64/boot/dts/qcom/sm8550.dtsi | 14 ++++++++------
1 file changed, 8 insertions(+), 6 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/sm8550.dtsi b/arch/arm64/boot/dts/qcom/sm8550.dtsi
index 912525e9bca6f5e1cbb8887ee0bf9e39650dc4ff..d4caf4d00832d7f1e8f65bf2bc873cddadc42168 100644
--- a/arch/arm64/boot/dts/qcom/sm8550.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8550.dtsi
@@ -1964,8 +1964,9 @@ pcie0: pcie@1c00000 {
<0 0x60000000 0 0xf1d>,
<0 0x60000f20 0 0xa8>,
<0 0x60001000 0 0x1000>,
- <0 0x60100000 0 0x100000>;
- reg-names = "parf", "dbi", "elbi", "atu", "config";
+ <0 0x60100000 0 0x100000>,
+ <0 0x01C03000 0 0x1000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x01000000 0x0 0x00000000 0x0 0x60200000 0x0 0x100000>,
@@ -2092,7 +2093,7 @@ opp-16000000-3 {
};
};
- pcieport0: pcie@0 {
+ pcie0_port0: pcie@0 {
device_type = "pci";
reg = <0x0 0x0 0x0 0x0 0x0>;
bus-range = <0x01 0xff>;
@@ -2138,8 +2139,9 @@ pcie1: pcie@1c08000 {
<0x0 0x40000000 0x0 0xf1d>,
<0x0 0x40000f20 0x0 0xa8>,
<0x0 0x40001000 0x0 0x1000>,
- <0x0 0x40100000 0x0 0x100000>;
- reg-names = "parf", "dbi", "elbi", "atu", "config";
+ <0x0 0x40100000 0x0 0x100000>,
+ <0x0 0x01C0B000 0x0 0x1000>;
+ reg-names = "parf", "dbi", "elbi", "atu", "config", "mhi";
#address-cells = <3>;
#size-cells = <2>;
ranges = <0x01000000 0x0 0x00000000 0x0 0x40200000 0x0 0x100000>,
@@ -2288,7 +2290,7 @@ opp-32000000-4 {
};
};
- pcie@0 {
+ pcie1_port0: pcie@0 {
device_type = "pci";
reg = <0x0 0x0 0x0 0x0 0x0>;
bus-range = <0x01 0xff>;
--
2.34.1
next prev parent reply other threads:[~2026-04-04 9:51 UTC|newest]
Thread overview: 22+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-04 9:50 [PATCH 0/5] arm64: dts: qcom: add QCS8550 RB5Gen2 support Joe Sandom via B4 Relay
2026-04-04 9:50 ` Joe Sandom via B4 Relay [this message]
2026-04-04 21:07 ` [PATCH 1/5] arm64: dts: qcom: sm8550: add PCIe MHI register regions and port labels Dmitry Baryshkov
2026-04-07 8:53 ` Joe Sandom
2026-04-07 11:05 ` Konrad Dybcio
2026-04-07 11:43 ` Joe Sandom
2026-04-04 9:50 ` [PATCH 2/5] arm64: dts: qcom: sm8550-hdk: update PCIe port label reference Joe Sandom via B4 Relay
2026-04-04 21:07 ` Dmitry Baryshkov
2026-04-07 8:55 ` Joe Sandom
2026-04-05 8:11 ` Krzysztof Kozlowski
2026-04-04 9:50 ` [PATCH 3/5] arm64: dts: qcom: sm8550-qrd: " Joe Sandom via B4 Relay
2026-04-04 9:50 ` [PATCH 4/5] dt-bindings: arm: qcom: document QCS8550 RB5Gen2 board Joe Sandom via B4 Relay
2026-04-05 8:11 ` Krzysztof Kozlowski
2026-04-04 9:50 ` [PATCH 5/5] arm64: dts: qcom: qcs8550: add QCS8550 RB5Gen2 board support Joe Sandom via B4 Relay
2026-04-04 21:20 ` Dmitry Baryshkov
2026-04-07 11:39 ` Joe Sandom
2026-04-07 15:01 ` Dmitry Baryshkov
2026-04-07 15:43 ` Joe Sandom
2026-04-07 16:14 ` Manivannan Sadhasivam
2026-04-09 10:04 ` Joe Sandom
2026-04-09 11:26 ` Manivannan Sadhasivam
2026-04-09 11:46 ` Joe Sandom
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260404-rb5gen2-dts-v1-1-895f8fc494fc@axon.com \
--to=devnull+jsandom.axon.com@kernel.org \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=jsandom@axon.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®