From: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
To: Robert Foss <rfoss@kernel.org>, Todor Tomov <todor.too@gmail.com>,
Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>,
Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>
Cc: linux-media@vger.kernel.org, linux-arm-msm@vger.kernel.org,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
Subject: [PATCH 2/4] media: qcom: camss: add support for X1P42100 camss
Date: Fri, 10 Apr 2026 12:25:32 +0800 [thread overview]
Message-ID: <20260410-purwa_camss-v1-2-eedcf6d9d8ee@oss.qualcomm.com> (raw)
In-Reply-To: <20260410-purwa_camss-v1-0-eedcf6d9d8ee@oss.qualcomm.com>
The Purwa camera subsystem is a cut-down variant of the Hamoa CAMSS.
Compared to Hamoa, Purwa provides only two CSIPHY instances and does
not include the VFE1.
Signed-off-by: Wenmeng Liu <wenmeng.liu@oss.qualcomm.com>
---
.../platform/qcom/camss/camss-csiphy-3ph-1-0.c | 2 +
drivers/media/platform/qcom/camss/camss-vfe.c | 2 +
drivers/media/platform/qcom/camss/camss.c | 109 +++++++++++++++++++++
drivers/media/platform/qcom/camss/camss.h | 1 +
4 files changed, 114 insertions(+)
diff --git a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
index 4154832745525972a663809c947a9e9aeca9f944..d37f71de0f42c394b0918a22de2a18836cbfec75 100644
--- a/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
+++ b/drivers/media/platform/qcom/camss/camss-csiphy-3ph-1-0.c
@@ -1020,6 +1020,7 @@ static bool csiphy_is_gen2(u32 version)
case CAMSS_8650:
case CAMSS_8775P:
case CAMSS_X1E80100:
+ case CAMSS_X1P42100:
ret = true;
break;
}
@@ -1115,6 +1116,7 @@ static int csiphy_init(struct csiphy_device *csiphy)
regs->lane_array_size = ARRAY_SIZE(lane_regs_sc8280xp);
break;
case CAMSS_X1E80100:
+ case CAMSS_X1P42100:
regs->lane_regs = &lane_regs_x1e80100[0];
regs->lane_array_size = ARRAY_SIZE(lane_regs_x1e80100);
regs->offset = 0x1000;
diff --git a/drivers/media/platform/qcom/camss/camss-vfe.c b/drivers/media/platform/qcom/camss/camss-vfe.c
index 5baf0e3d4bc461df28d8dcf97a98dec04fa17ceb..b48dfad5a8a73f81254086e5fc8f5bbc3a45aef3 100644
--- a/drivers/media/platform/qcom/camss/camss-vfe.c
+++ b/drivers/media/platform/qcom/camss/camss-vfe.c
@@ -353,6 +353,7 @@ static u32 vfe_src_pad_code(struct vfe_line *line, u32 sink_code,
case CAMSS_8650:
case CAMSS_8775P:
case CAMSS_X1E80100:
+ case CAMSS_X1P42100:
switch (sink_code) {
case MEDIA_BUS_FMT_YUYV8_1X16:
{
@@ -2012,6 +2013,7 @@ static int vfe_bpl_align(struct vfe_device *vfe)
case CAMSS_8650:
case CAMSS_8775P:
case CAMSS_X1E80100:
+ case CAMSS_X1P42100:
ret = 16;
break;
default:
diff --git a/drivers/media/platform/qcom/camss/camss.c b/drivers/media/platform/qcom/camss/camss.c
index 3b092560b5df54513a5d0253dded1527769fcfbe..d2221f968251fc2c1ab7996ff54b087667a8108c 100644
--- a/drivers/media/platform/qcom/camss/camss.c
+++ b/drivers/media/platform/qcom/camss/camss.c
@@ -4158,6 +4158,98 @@ static const struct resources_wrapper csid_wrapper_res_x1e80100 = {
.reg = "csid_wrapper",
};
+static const struct camss_subdev_resources csiphy_res_x1p42100[] = {
+ /* CSIPHY0 */
+ {
+ .csiphy = {
+ .id = 0,
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ },
+ },
+ /* CSIPHY4 */
+ {
+ .csiphy = {
+ .id = 4,
+ .hw_ops = &csiphy_ops_3ph_1_0,
+ .formats = &csiphy_formats_sdm845
+ },
+ },
+};
+
+static const struct camss_subdev_resources vfe_res_x1p42100[] = {
+ /* IFE0 */
+ {
+ .regulators = {},
+ .clock = {"camnoc_rt_axi", "camnoc_nrt_axi", "cpas_ahb",
+ "cpas_fast_ahb", "cpas_vfe0", "vfe0_fast_ahb",
+ "vfe0" },
+ .clock_rate = { { 400000000 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 345600000, 432000000, 594000000, 675000000,
+ 727000000 }, },
+ .reg = { "vfe0" },
+ .interrupt = { "vfe0" },
+ .vfe = {
+ .line_num = 4,
+ .pd_name = "ife0",
+ .hw_ops = &vfe_ops_680,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ },
+ },
+ /* IFE_LITE_0 */
+ {
+ .regulators = {},
+ .clock = { "camnoc_rt_axi", "camnoc_nrt_axi", "cpas_ahb",
+ "vfe_lite_ahb", "cpas_vfe_lite", "vfe_lite",
+ "vfe_lite_csid" },
+ .clock_rate = { { 400000000 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 266666667, 400000000, 480000000 },
+ { 266666667, 400000000, 480000000 }, },
+ .reg = { "vfe_lite0" },
+ .interrupt = { "vfe_lite0" },
+ .vfe = {
+ .is_lite = true,
+ .line_num = 4,
+ .hw_ops = &vfe_ops_680,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ },
+ },
+ /* IFE_LITE_1 */
+ {
+ .regulators = {},
+ .clock = { "camnoc_rt_axi", "camnoc_nrt_axi", "cpas_ahb",
+ "vfe_lite_ahb", "cpas_vfe_lite", "vfe_lite",
+ "vfe_lite_csid" },
+ .clock_rate = { { 400000000 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 0 },
+ { 266666667, 400000000, 480000000 },
+ { 266666667, 400000000, 480000000 }, },
+ .reg = { "vfe_lite1" },
+ .interrupt = { "vfe_lite1" },
+ .vfe = {
+ .is_lite = true,
+ .line_num = 4,
+ .hw_ops = &vfe_ops_680,
+ .formats_rdi = &vfe_formats_rdi_845,
+ .formats_pix = &vfe_formats_pix_845
+ },
+ },
+};
+
/*
* camss_add_clock_margin - Add margin to clock frequency rate
* @rate: Clock frequency rate
@@ -5340,6 +5432,22 @@ static const struct camss_resources x1e80100_resources = {
.vfe_num = ARRAY_SIZE(vfe_res_x1e80100),
};
+static const struct camss_resources x1p42100_resources = {
+ .version = CAMSS_X1P42100,
+ .pd_name = "top",
+ .csiphy_res = csiphy_res_x1p42100,
+ .tpg_res = tpg_res_x1e80100,
+ .csid_res = csid_res_x1e80100,
+ .vfe_res = vfe_res_x1p42100,
+ .csid_wrapper_res = &csid_wrapper_res_x1e80100,
+ .icc_res = icc_res_x1e80100,
+ .icc_path_num = ARRAY_SIZE(icc_res_x1e80100),
+ .csiphy_num = ARRAY_SIZE(csiphy_res_x1p42100),
+ .tpg_num = ARRAY_SIZE(tpg_res_x1e80100),
+ .csid_num = ARRAY_SIZE(csid_res_x1e80100),
+ .vfe_num = ARRAY_SIZE(vfe_res_x1p42100),
+};
+
static const struct of_device_id camss_dt_match[] = {
{ .compatible = "qcom,msm8916-camss", .data = &msm8916_resources },
{ .compatible = "qcom,msm8939-camss", .data = &msm8939_resources },
@@ -5358,6 +5466,7 @@ static const struct of_device_id camss_dt_match[] = {
{ .compatible = "qcom,sm8550-camss", .data = &sm8550_resources },
{ .compatible = "qcom,sm8650-camss", .data = &sm8650_resources },
{ .compatible = "qcom,x1e80100-camss", .data = &x1e80100_resources },
+ { .compatible = "qcom,x1p42100-camss", .data = &x1p42100_resources },
{ }
};
diff --git a/drivers/media/platform/qcom/camss/camss.h b/drivers/media/platform/qcom/camss/camss.h
index 24ec3ad7990e7c582b06a2c112361128b2358630..c1374033f0b2036458ae6fe31034f183d3041a09 100644
--- a/drivers/media/platform/qcom/camss/camss.h
+++ b/drivers/media/platform/qcom/camss/camss.h
@@ -94,6 +94,7 @@ enum camss_version {
CAMSS_8650,
CAMSS_8775P,
CAMSS_X1E80100,
+ CAMSS_X1P42100,
};
enum icc_count {
--
2.34.1
next prev parent reply other threads:[~2026-04-10 4:25 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-04-10 4:25 [PATCH 0/4] media: camss: add support for purwa platform Wenmeng Liu
2026-04-10 4:25 ` [PATCH 1/4] dt-bindings: media: Add bindings for qcom,x1p42100-camss Wenmeng Liu
2026-04-10 7:59 ` Bryan O'Donoghue
2026-04-10 8:06 ` Bryan O'Donoghue
2026-04-10 11:36 ` Krzysztof Kozlowski
2026-04-10 4:25 ` Wenmeng Liu [this message]
2026-04-10 4:25 ` [PATCH 3/4] arm64: dts: qcom: purwa: Add camss node Wenmeng Liu
2026-04-10 4:25 ` [PATCH 4/4] arm64: dts: qcom: purwa-iot-evk: " Wenmeng Liu
2026-04-10 8:16 ` Bryan O'Donoghue
2026-04-10 8:38 ` Wenmeng Liu
2026-04-10 13:43 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260410-purwa_camss-v1-2-eedcf6d9d8ee@oss.qualcomm.com \
--to=wenmeng.liu@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=bryan.odonoghue@linaro.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=rfoss@kernel.org \
--cc=robh@kernel.org \
--cc=todor.too@gmail.com \
--cc=vladimir.zapolskiy@linaro.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®