mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Sneh Mankad <sneh.mankad@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
	Linus Walleij <linusw@kernel.org>,
	Neil Armstrong <neil.armstrong@linaro.org>,
	Krzysztof Kozlowski <krzk@kernel.org>
Cc: linux-arm-msm@vger.kernel.org, linux-gpio@vger.kernel.org,
	linux-kernel@vger.kernel.org, stable@vger.kernel.org,
	Sneh Mankad <sneh.mankad@oss.qualcomm.com>,
	Maulik Shah <maulik.shah@oss.qualcomm.com>
Subject: [PATCH v2] pinctrl: qcom: Unconditionally mark gpio as wakeup enable
Date: Thu, 30 Apr 2026 14:50:07 +0530	[thread overview]
Message-ID: <20260430-enable_wakeup_capable_gpios-v2-1-8c26ac795318@oss.qualcomm.com> (raw)

The wakeup enable bit needs to be set irrespective of the SoC using PDC or
MPM as wakeup capable irqchip to allow the GPIO interrupts to be forwarded
to parent irqchip.

This is set only for PDC irqchip using additional check skip_wake_irqs
making it impossible for MPM irqchip to detect the GPIO interrupt during
SoC low power mode since for MPM irqchip the skip_wake_irqs is always
false.

Remove skip_wake_irqs condition when setting wakeup enable bit to allow
forwarding GPIO interrupts for SoCs using MPM irqchip too.

Fixes: 76b446f5b86e ("pinctrl: qcom: handle intr_target_reg wakeup_present/enable bits")
Signed-off-by: Sneh Mankad <sneh.mankad@oss.qualcomm.com>
Reviewed-by: Maulik Shah <maulik.shah@oss.qualcomm.com>
---
Changes in v2:
- Modified comment to specify MPM HW as well.
- Spelling correction.
- Link to v1: https://lore.kernel.org/r/20260430-enable_wakeup_capable_gpios-v1-1-5de39bf06094@oss.qualcomm.com
---
 drivers/pinctrl/qcom/pinctrl-msm.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/pinctrl/qcom/pinctrl-msm.c b/drivers/pinctrl/qcom/pinctrl-msm.c
index 45b3a2763eb85405fecdd4770ba3d4ab684563f0..6a24f9b5e4a979528ba6b5b87fd297c2783ec765 100644
--- a/drivers/pinctrl/qcom/pinctrl-msm.c
+++ b/drivers/pinctrl/qcom/pinctrl-msm.c
@@ -1242,12 +1242,12 @@ static int msm_gpio_irq_reqres(struct irq_data *d)
 	/*
 	 * If the wakeup_enable bit is present and marked as available for the
 	 * requested GPIO, it should be enabled when the GPIO is marked as
-	 * wake irq in order to allow the interrupt event to be transfered to
-	 * the PDC HW.
+	 * wake irq in order to allow the interrupt event to be transferred to
+	 * the PDC/MPM HW.
 	 * While the name implies only the wakeup event, it's also required for
 	 * the interrupt event.
 	 */
-	if (test_bit(d->hwirq, pctrl->skip_wake_irqs) && g->intr_wakeup_present_bit) {
+	if (g->intr_wakeup_present_bit) {
 		u32 intr_cfg;
 
 		raw_spin_lock_irqsave(&pctrl->lock, flags);
@@ -1275,7 +1275,7 @@ static void msm_gpio_irq_relres(struct irq_data *d)
 	unsigned long flags;
 
 	/* Disable the wakeup_enable bit if it has been set in msm_gpio_irq_reqres() */
-	if (test_bit(d->hwirq, pctrl->skip_wake_irqs) && g->intr_wakeup_present_bit) {
+	if (g->intr_wakeup_present_bit) {
 		u32 intr_cfg;
 
 		raw_spin_lock_irqsave(&pctrl->lock, flags);

---
base-commit: b4e07588e743c989499ca24d49e752c074924a9a
change-id: 20260430-enable_wakeup_capable_gpios-cb9439ae8772

Best regards,
-- 
Sneh Mankad <sneh.mankad@oss.qualcomm.com>


             reply	other threads:[~2026-04-30  9:20 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-04-30  9:20 Sneh Mankad [this message]
2026-05-15 11:32 ` Konrad Dybcio
2026-06-16 11:18   ` Sneh Mankad

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260430-enable_wakeup_capable_gpios-v2-1-8c26ac795318@oss.qualcomm.com \
    --to=sneh.mankad@oss.qualcomm.com \
    --cc=andersson@kernel.org \
    --cc=krzk@kernel.org \
    --cc=linusw@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-gpio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=maulik.shah@oss.qualcomm.com \
    --cc=neil.armstrong@linaro.org \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®