[PATCH 2/2] reset: spacemit: k3: fix USB2 ahb reset

[Yixun Lan <dlan@kernel.org>]

According to SpacemiT K3's updated docs, the USB2 ahb reset and USB2 bus
clock enable bit was wrongly swapped, the correct one should be:

Register : APMU_USB_CLK_RES_CTRL
bit[1]   : usb2_port_bus_clk_en
bit[0]   : usb2_port_ahb_rstn

Fixes: a0e0c2f8c5f3 ("reset: spacemit: k3: Decouple composite reset lines")
Reported-by: Junzhong Pan <panjunzhong@linux.spacemit.com>
Signed-off-by: Yixun Lan <dlan@kernel.org>
---
 drivers/reset/spacemit/reset-spacemit-k3.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/drivers/reset/spacemit/reset-spacemit-k3.c b/drivers/reset/spacemit/reset-spacemit-k3.c
index 9841f5e057b2..2e87f320cf11 100644
--- a/drivers/reset/spacemit/reset-spacemit-k3.c
+++ b/drivers/reset/spacemit/reset-spacemit-k3.c
@@ -112,7 +112,7 @@ static const struct ccu_reset_data k3_apmu_resets[] = {
 	[RESET_APMU_SDH0]	= RESET_DATA(APMU_SDH0_CLK_RES_CTRL,	0, BIT(1)),
 	[RESET_APMU_SDH1]	= RESET_DATA(APMU_SDH1_CLK_RES_CTRL,	0, BIT(1)),
 	[RESET_APMU_SDH2]	= RESET_DATA(APMU_SDH2_CLK_RES_CTRL,	0, BIT(1)),
-	[RESET_APMU_USB2_AHB]	= RESET_DATA(APMU_USB_CLK_RES_CTRL,	0, BIT(1)),
+	[RESET_APMU_USB2_AHB]	= RESET_DATA(APMU_USB_CLK_RES_CTRL,	0, BIT(0)),
 	[RESET_APMU_USB2_VCC]	= RESET_DATA(APMU_USB_CLK_RES_CTRL,	0, BIT(2)),
 	[RESET_APMU_USB2_PHY]	= RESET_DATA(APMU_USB_CLK_RES_CTRL,	0, BIT(3)),
 	[RESET_APMU_USB3_A_AHB]	= RESET_DATA(APMU_USB_CLK_RES_CTRL,	0, BIT(5)),

-- 
2.54.0