[PATCH 1/2] dt-bindings: soc: qcom: Document CDSP Power Management

[Vignesh Viswanathan <vignesh.viswanathan@oss.qualcomm.com>]

Add documentation for the CDSP Power Management driver, which handles
Dynamic Clock and Voltage Scaling (DCVS) requests via SMEM, manages Low
Power Mode (LPM) transitions via MPM handshake, and provides virtual
regulators for the remoteproc driver to control CDSP power rails.

Signed-off-by: Vignesh Viswanathan <vignesh.viswanathan@oss.qualcomm.com>
---
 .../bindings/soc/qcom/qcom,cdsp-power.yaml         | 138 +++++++++++++++++++++
 1 file changed, 138 insertions(+)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,cdsp-power.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,cdsp-power.yaml
new file mode 100644
index 000000000000..f0f89fdeba4e
--- /dev/null
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,cdsp-power.yaml
@@ -0,0 +1,138 @@
+# SPDX-License-Identifier: GPL-2.0-only OR BSD-2-Clause
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/soc/qcom/qcom,cdsp-power.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Qualcomm CDSP Power Management
+
+maintainers:
+  - Vignesh Viswanathan <vignesh.viswanathan@oss.qualcomm.com>
+
+description:
+  The CDSP Power Management driver provides power management services for the
+  Qualcomm Compute DSP (CDSP) subsystem. It handles Dynamic Clock and Voltage
+  Scaling (DCVS) requests via SMEM, manages Low Power Mode (LPM) transitions
+  via MPM handshake, and provides virtual regulators that are consumed by the
+  CDSP remoteproc driver.
+
+properties:
+  compatible:
+    const: qcom,cdsp-power
+
+  reg:
+    items:
+      - description: MPM (Modem Power Manager) register region
+      - description: RSCC (RSC Configuration) register region
+
+  reg-names:
+    items:
+      - const: mpm
+      - const: rscc
+
+  interrupts-extended:
+    items:
+      - description: LPM (Low Power Mode) interrupt from MPM
+      - description: DCVS (Dynamic Clock and Voltage Scaling) interrupt from IPCC
+
+  interrupt-names:
+    items:
+      - const: lpm
+      - const: dcvs
+
+  mboxes:
+    maxItems: 1
+    description: IPCC mailbox channel for sending DCVS responses to CDSP
+
+  qcom,smem-item:
+    $ref: /schemas/types.yaml#/definitions/uint32
+    description:
+      SMEM item ID used for DCVS communication channel between APSS and CDSP.
+      This is a platform-specific value that identifies the shared memory region.
+
+  vdd-cx-supply:
+    description:
+      Phandle to the CX voltage regulator. This is the actual hardware regulator
+      (e.g., from MP8899 PMIC) that supplies power to the CDSP CX rail.
+
+  vdd-mx-supply:
+    description:
+      Phandle to the MX voltage regulator. This is the actual hardware regulator
+      (e.g., from MP8899 PMIC) that supplies power to the CDSP MX rail. Optional
+      on boards where MX rail is always-on or not present.
+
+  regulators:
+    type: object
+    description:
+      Virtual regulators provided by this driver for consumption by the CDSP
+      remoteproc driver. These virtual regulators pass through enable/disable
+      requests to the actual hardware regulators (vdd-cx-supply, vdd-mx-supply).
+
+    properties:
+      cdsp-vdd-cx:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        description: Virtual CX regulator for CDSP
+        unevaluatedProperties: false
+
+      cdsp-vdd-mx:
+        type: object
+        $ref: /schemas/regulator/regulator.yaml#
+        description: Virtual MX regulator for CDSP
+        unevaluatedProperties: false
+
+    additionalProperties: false
+
+required:
+  - compatible
+  - reg
+  - reg-names
+  - interrupts-extended
+  - interrupt-names
+  - mboxes
+  - qcom,smem-item
+  - vdd-cx-supply
+  - regulators
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/arm-gic.h>
+    #include <dt-bindings/interrupt-controller/irq.h>
+    #include <dt-bindings/mailbox/qcom-ipcc.h>
+
+    soc {
+        #address-cells = <2>;
+        #size-cells = <2>;
+
+        cdsp_power: cdsp-power@4ae000 {
+            compatible = "qcom,cdsp-power";
+            reg = <0x0 0x004ae000 0x0 0x1000>,
+                  <0x0 0x26018018 0x0 0x4>;
+            reg-names = "mpm", "rscc";
+
+            interrupts-extended = <&intc GIC_SPI 65 IRQ_TYPE_EDGE_RISING 0>,
+                                  <&ipcc IPCC_CLIENT_CDSP
+                                         IPCC_MPROC_SIGNAL_PING
+                                         IRQ_TYPE_EDGE_RISING>;
+            interrupt-names = "lpm", "dcvs";
+
+            mboxes = <&ipcc IPCC_CLIENT_CDSP IPCC_MPROC_SIGNAL_PING>;
+
+            qcom,smem-item = <503>;
+
+            vdd-cx-supply = <&ipq9650_s2>;
+            vdd-mx-supply = <&ipq9650_s4>;
+
+            regulators {
+                cdsp_vdd_cx: cdsp-vdd-cx {
+                    regulator-name = "cdsp-vdd-cx";
+                };
+
+                cdsp_vdd_mx: cdsp-vdd-mx {
+                    regulator-name = "cdsp-vdd-mx";
+                };
+            };
+        };
+    };

-- 
2.43.0