From: Jai Luthra <jai.luthra@ideasonboard.com>
To: Mauro Carvalho Chehab <mchehab@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Sakari Ailus <sakari.ailus@linux.intel.com>,
Laurent Pinchart <laurent.pinchart@ideasonboard.com>,
Kieran Bingham <kieran.bingham@ideasonboard.com>
Cc: Lachlan Michael <Lachlan.Michael@sony.com>,
Ryuichi Tadano <Ryuichi.Tadano@sony.com>,
Kengo Hayasaka <Kengo.Hayasaka@sony.com>,
linux-media@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Jai Luthra <jai.luthra@ideasonboard.com>
Subject: [PATCH v3 1/2] dt-bindings: media: i2c: Add Sony IMX678
Date: Wed, 20 May 2026 17:17:25 +0200 [thread overview]
Message-ID: <20260520-imx678-v3-1-8b5f9676486e@ideasonboard.com> (raw)
In-Reply-To: <20260520-imx678-v3-0-8b5f9676486e@ideasonboard.com>
Sony IMX678 is an 8.4 Megapixel (3856x2180) CMOS sensor, that can output
pixels over MIPI CSI-2 bus. Add bindings for it.
Signed-off-by: Jai Luthra <jai.luthra@ideasonboard.com>
---
Changes in v3:
- Use `reset-gpios`, mentioning the sensor XCLR acts like RESETN, instead of `xclr-gpios`
Changes in v2:
- Add per-variant compatibles for mono and colour, alongside the
generic fallback, so the variant can be declared without powering
the sensor at probe.
- Rename reset GPIO to xclr as that's what it's called in the
datasheet, and how it behaves
- Reference the generic video interface devices schema and switch to
unevaluatedProperties.
- Drop "link-frequencies: true"
- Drop the T: entry for media.git from MAINTAINERS.
---
.../devicetree/bindings/media/i2c/sony,imx678.yaml | 129 +++++++++++++++++++++
MAINTAINERS | 6 +
2 files changed, 135 insertions(+)
diff --git a/Documentation/devicetree/bindings/media/i2c/sony,imx678.yaml b/Documentation/devicetree/bindings/media/i2c/sony,imx678.yaml
new file mode 100644
index 000000000000..d85745ddbefd
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/sony,imx678.yaml
@@ -0,0 +1,129 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (C) 2026 Ideas on Board Oy
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/sony,imx678.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Sony IMX678 Sensor
+
+maintainers:
+ - Jai Luthra <jai.luthra@ideasonboard.com>
+
+description:
+ Sony IMX678 diagonal 8.86 mm (Type 1/1.8) CMOS active pixel type solid-state
+ image sensor with a square pixel array and 8.40M (3856x2180) effective pixels.
+
+allOf:
+ - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+ compatible:
+ enum:
+ - sony,imx678
+ - sony,imx678-aamr
+ - sony,imx678-aaqr
+ description:
+ The IMX678 sensor exists in a colour variant (IMX678-AAQR) and a mono
+ variant (IMX678-AAMR). An internal register can also help detect this at
+ runtime.
+
+ reg:
+ maxItems: 1
+
+ clocks:
+ description: |
+ Input clock (INCK). Only the rates listed in the datasheet are supported:
+ 13.5, 18, 24, 27, 36, 37.125, 72, and 74.25 MHz.
+ maxItems: 1
+
+ avdd-supply:
+ description: Analog power supply (3.3V)
+
+ ovdd-supply:
+ description: Interface power supply (1.8V)
+
+ dvdd-supply:
+ description: Digital power supply (1.2V)
+
+ reset-gpios:
+ description: Sensor RESETN (XCLR) GPIO
+ maxItems: 1
+
+ port:
+ $ref: /schemas/graph.yaml#/$defs/port-base
+ additionalProperties: false
+
+ properties:
+ endpoint:
+ $ref: /schemas/media/video-interfaces.yaml#
+ unevaluatedProperties: false
+
+ properties:
+ data-lanes:
+ oneOf:
+ - items:
+ - const: 1
+ - const: 2
+ - items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+ - items:
+ - const: 1
+ - const: 2
+ - const: 3
+ - const: 4
+ - const: 5
+ - const: 6
+ - const: 7
+ - const: 8
+
+ required:
+ - data-lanes
+ - link-frequencies
+
+ required:
+ - endpoint
+
+required:
+ - compatible
+ - reg
+ - clocks
+ - avdd-supply
+ - ovdd-supply
+ - dvdd-supply
+ - port
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ #include <dt-bindings/gpio/gpio.h>
+
+ i2c {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ camera@1a {
+ compatible = "sony,imx678";
+ reg = <0x1a>;
+ clocks = <&imx678_clk>;
+
+ avdd-supply = <&camera_avdd_3v3>;
+ ovdd-supply = <&camera_ovdd_1v8>;
+ dvdd-supply = <&camera_dvdd_1v2>;
+
+ reset-gpios = <&gpio 0 GPIO_ACTIVE_LOW>;
+
+ port {
+ imx678: endpoint {
+ remote-endpoint = <&cam>;
+ data-lanes = <1 2 3 4>;
+ link-frequencies = /bits/ 64 <720000000>;
+ };
+ };
+ };
+ };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 2fb1c75afd16..6b368345a771 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -24911,6 +24911,12 @@ T: git git://linuxtv.org/media.git
F: Documentation/devicetree/bindings/media/i2c/sony,imx415.yaml
F: drivers/media/i2c/imx415.c
+SONY IMX678 SENSOR DRIVER
+M: Jai Luthra <jai.luthra@ideasonboard.com>
+L: linux-media@vger.kernel.org
+S: Maintained
+F: Documentation/devicetree/bindings/media/i2c/sony,imx678.yaml
+
SONY MEMORYSTICK SUBSYSTEM
M: Maxim Levitsky <maximlevitsky@gmail.com>
M: Alex Dubov <oakad@yahoo.com>
--
2.54.0
next prev parent reply other threads:[~2026-05-20 15:18 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-20 15:17 [PATCH v3 0/2] media: Add bindings and driver for " Jai Luthra
2026-05-20 15:17 ` Jai Luthra [this message]
2026-05-20 15:56 ` [PATCH v3 1/2] dt-bindings: media: i2c: Add " Conor Dooley
2026-05-20 17:19 ` Jai Luthra
2026-05-20 22:04 ` Conor Dooley
2026-05-21 7:30 ` Jai Luthra
2026-05-21 9:30 ` Conor Dooley
2026-05-20 15:17 ` [PATCH v3 2/2] media: i2c: imx678: Add driver for " Jai Luthra
2026-05-21 11:12 ` Sakari Ailus
2026-05-25 14:25 ` Jai Luthra
2026-05-22 17:01 ` Tarang Raval
2026-05-25 13:58 ` Jai Luthra
2026-05-26 6:03 ` Tarang Raval
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260520-imx678-v3-1-8b5f9676486e@ideasonboard.com \
--to=jai.luthra@ideasonboard.com \
--cc=Kengo.Hayasaka@sony.com \
--cc=Lachlan.Michael@sony.com \
--cc=Ryuichi.Tadano@sony.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kieran.bingham@ideasonboard.com \
--cc=krzk+dt@kernel.org \
--cc=laurent.pinchart@ideasonboard.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-media@vger.kernel.org \
--cc=mchehab@kernel.org \
--cc=robh@kernel.org \
--cc=sakari.ailus@linux.intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®