Re: [PATCH] serial: max310x: fix I2C-only build

[Hugo Villeneuve <hugo@hugovil.com>]

Hi Arnd,

On Wed, 20 May 2026 08:47:05 +0200
"Arnd Bergmann" <arnd@arndb.de> wrote:

> [You don't often get email from arnd@arndb.de. Learn why this is important at https://aka.ms/LearnAboutSenderIdentification ]
> 
> On Tue, May 19, 2026, at 23:14, Hugo Villeneuve wrote:
> >> now causes build failures:
> >
> > A few days ago i sent v2 of a patch to fix this problem:
> >
> > https://lore.kernel.org/all/20260515183217.3554037-1-hugo@hugovil.com/raw
> >
> > Did you saw it?
> 
> Sorry I hadn't checked for other patches. I verified that your
> changes are functionally the same as mine.
> 
> The one change I have that you didn't include is
> 
> >> diff --git a/drivers/tty/serial/Kconfig b/drivers/tty/serial/Kconfig
> >> index 811250bbbd39..b9b40e80ea81 100644
> >> --- a/drivers/tty/serial/Kconfig
> >> +++ b/drivers/tty/serial/Kconfig
> >> @@ -323,6 +323,7 @@ config SERIAL_MAX3100
> >>  config SERIAL_MAX310X
> >>      tristate "MAX310X support"
> >>      depends on SPI_MASTER || I2C
> >> +    depends on I2C || !I2C
> >>      select SERIAL_CORE
> >>      select REGMAP_SPI if SPI_MASTER
> >>      select REGMAP_I2C if I2C
> 
> This is still required to avoid a link failure with
> SERIAL_MAX310X=y and I2C=m. Do you want to include this in
> a v3 of your patch, or should I send this separately?

If I2C=m, i cannot select SERIAL_MAX310X=y, it is automatically set (or
reset) to "m", even if I manually force it to "y", do you have the same
behavior?

Before i converted the sc16is7xx driver to split i2c/spi, it was done
like this:

  depends on (SPI_MASTER && !I2C) || I2C

Based on what we agree on, I will include it in V3...

-- 
Hugo Villeneuve