[PATCH] ASoC: cs35l56: Fix flushing of IRQ work in cs35l56_sdw_remove()

[Richard Fitzgerald <rf@opensource.cirrus.com>]

Use flush_work() instead of cancel_work_sync() to terminate pending IRQ
work in cs35l56_sdw_remove(). And flush_work() again after masking the
interrupts to flush any queueing that was racing with the masking. This is
the same sequence as cs35l56_sdw_system_suspend().

cs35l56_sdw_interrupt() takes the pm_runtime to prevent the bus powering-
down before the interrupt status can be read and handled. The work releases
this pm_runtime. So cancelling it, instead of flushing, could leave an
unbalanced pm_runtime.

Signed-off-by: Richard Fitzgerald <rf@opensource.cirrus.com>
Fixes: e49611252900 ("ASoC: cs35l56: Add driver for Cirrus Logic CS35L56")
---
 sound/soc/codecs/cs35l56-sdw.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/cs35l56-sdw.c b/sound/soc/codecs/cs35l56-sdw.c
index d2b82a846ae8..c21568f57c63 100644
--- a/sound/soc/codecs/cs35l56-sdw.c
+++ b/sound/soc/codecs/cs35l56-sdw.c
@@ -544,10 +544,11 @@ static void cs35l56_sdw_remove(struct sdw_slave *peripheral)
 
 	/* Disable SoundWire interrupts */
 	cs35l56->sdw_irq_no_unmask = true;
-	cancel_work_sync(&cs35l56->sdw_irq_work);
+	flush_work(&cs35l56->sdw_irq_work);
 	sdw_write_no_pm(peripheral, CS35L56_SDW_GEN_INT_MASK_1, 0);
 	sdw_read_no_pm(peripheral, CS35L56_SDW_GEN_INT_STAT_1);
 	sdw_write_no_pm(peripheral, CS35L56_SDW_GEN_INT_STAT_1, 0xFF);
+	flush_work(&cs35l56->sdw_irq_work);
 
 	cs35l56_remove(cs35l56);
 }
-- 
2.47.3