From: Michael Bommarito <michael.bommarito@gmail.com>
To: Trond Myklebust <trondmy@kernel.org>, Anna Schumaker <anna@kernel.org>
Cc: Jeff Layton <jlayton@kernel.org>,
Tom Haynes <Thomas.Haynes@primarydata.com>,
Peng Tao <tao.peng@primarydata.com>, Kees Cook <kees@kernel.org>,
Mike Snitzer <snitzer@kernel.org>,
Tigran Mkrtchyan <tigran.mkrtchyan@desy.de>,
linux-nfs@vger.kernel.org, linux-kernel@vger.kernel.org,
stable@vger.kernel.org
Subject: [PATCH 1/2] NFSv4/pNFS: reject zero-length r_addr in nfs4_decode_mp_ds_addr
Date: Fri, 22 May 2026 21:40:32 -0400 [thread overview]
Message-ID: <20260523014033.2459677-2-michael.bommarito@gmail.com> (raw)
In-Reply-To: <20260523014033.2459677-1-michael.bommarito@gmail.com>
nfs4_decode_mp_ds_addr() decodes the r_netid and r_addr opaques of a
netaddr4 from a GETDEVICEINFO multipath-DS body, then immediately
calls strrchr(buf, '.') to locate the port separator. Both decodes
use xdr_stream_decode_string_dup(), and the current code checks only
"nlen < 0" / "rlen < 0" before dereferencing the returned string.
When the on-wire opaque has length zero, xdr_stream_decode_opaque_inline()
returns 0 and xdr_stream_decode_string_dup() falls through to its
"*str = NULL; return ret" tail, leaving buf NULL with a return value
of 0. The "< 0" check does not catch this, and the next line is
strrchr(NULL, '.'), a kernel NULL pointer dereference reachable from
any pNFS-flexfile client mounted against a malicious or compromised
metadata server.
Reject the zero-length cases explicitly so the decoder fails with
-EBADMSG (treated as a malformed GETDEVICEINFO body) instead of
panicking the client.
Cc: stable@vger.kernel.org
Fixes: 6b7f3cf96364 ("nfs41: pull decode_ds_addr from file layout to generic pnfs")
Assisted-by: Claude:claude-opus-4-7
Signed-off-by: Michael Bommarito <michael.bommarito@gmail.com>
---
fs/nfs/pnfs_nfs.c | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
Reproduced via a malicious NFSv4.1/pNFS server returning a flexfile
GETDEVICEINFO body with multipath_count >= 3 and one valid
(netid, uaddr) pair. Linux 7.0-rc7 + KASAN, QEMU/KVM. Stock kernel:
Oops: general protection fault [#1] SMP KASAN NOPTI
KASAN: null-ptr-deref in range [0x0000000000000000-0x0000000000000007]
RIP: 0010:strrchr+0x24/0x80
Call Trace:
nfs4_decode_mp_ds_addr+0xca/0x570
nfs4_ff_alloc_deviceid_node+0x357/0x1370
nfs4_find_get_deviceid+0x6b6/0xa90
nfs4_ff_layout_prepare_ds+0x3cf/0xa40
ff_layout_choose_ds_for_read+0x14c/0x350
ff_layout_pg_init_read+0x2a2/0xb90
...
nfs_file_splice_read+0xcf/0x190
do_sendfile+0x8eb/0xdf0
Kernel panic - not syncing: Fatal exception
Deterministic for any multipath_count >= 3; multipath_count <= 2
does not crash because the loop ends before consuming the malformed
trailing bytes.
Patched kernel rejects the same crafted body and a baseline
multipath_count = 1 mount + read completes normally.
diff --git a/fs/nfs/pnfs_nfs.c b/fs/nfs/pnfs_nfs.c
index 12632a706da88..0ff43dbcb7cd7 100644
--- a/fs/nfs/pnfs_nfs.c
+++ b/fs/nfs/pnfs_nfs.c
@@ -1075,14 +1075,14 @@ nfs4_decode_mp_ds_addr(struct net *net, struct xdr_stream *xdr, gfp_t gfp_flags)
/* r_netid */
nlen = xdr_stream_decode_string_dup(xdr, &netid, XDR_MAX_NETOBJ,
gfp_flags);
- if (unlikely(nlen < 0))
+ if (unlikely(nlen <= 0))
goto out_err;
/* r_addr: ip/ip6addr with port in dec octets - see RFC 5665 */
/* port is ".ABC.DEF", 8 chars max */
rlen = xdr_stream_decode_string_dup(xdr, &buf, INET6_ADDRSTRLEN +
IPV6_SCOPE_ID_LEN + 8, gfp_flags);
- if (unlikely(rlen < 0))
+ if (unlikely(rlen <= 0))
goto out_free_netid;
/* replace port '.' with '-' */
--
2.53.0
next prev parent reply other threads:[~2026-05-23 1:40 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-23 1:40 [PATCH 0/2] NFSv4/pNFS: fix client kernel panic from malformed GETDEVICEINFO Michael Bommarito
2026-05-23 1:40 ` Michael Bommarito [this message]
2026-05-23 1:40 ` [PATCH 2/2] NFSv4/flexfile,filelayout: bound multipath DS count in GETDEVICEINFO Michael Bommarito
2026-05-26 19:57 ` Anna Schumaker
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260523014033.2459677-2-michael.bommarito@gmail.com \
--to=michael.bommarito@gmail.com \
--cc=Thomas.Haynes@primarydata.com \
--cc=anna@kernel.org \
--cc=jlayton@kernel.org \
--cc=kees@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-nfs@vger.kernel.org \
--cc=snitzer@kernel.org \
--cc=stable@vger.kernel.org \
--cc=tao.peng@primarydata.com \
--cc=tigran.mkrtchyan@desy.de \
--cc=trondmy@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®