[PATCH v3 0/4] Add USB Phy driver and binding changes for Qualcomm Shikra SoC

[Pratham Pratap <pratham.pratap@oss.qualcomm.com>]

This series adds Driver and binding changes for USB Phys on Shikra.
There are two USB controllers - One of them is SS capable and other is
highspeed only capable.
 
Changes in v3:
- Moved to using qcs615-usb3-dp-phy since the DP Phy is present although
not operational.
- Using Talos as a fallback for shikra in qmp driver
- Add required "phy" reset in qmp usbc driver since its needed on Shikra
      
Link to v2:
https://lore.kernel.org/all/20260504170659.282532-1-krishna.kurapati@oss.qualcomm.com/
       
Changes in v2:
- Separated the usb controller binding changes
- Updated commit texts.
        
Link to v1:
https://lore.kernel.org/all/20260430-shikra-usb-v1-0-c9c108536fdc@oss.qualcomm.com/

Krishna Kurapati (4):
  dt-bindings: phy: qcom,qusb2: Document QUSB2 Phy for Shikra
  dt-bindings: phy: qcom,qcs615-qmp-usb3-dp-phy: Add support for Shikra
  phy: qcom-qusb2: Add support for Shikra
  phy: qcom: qmp-usbc: Add support for "phy" reset used on Shikra

 .../bindings/phy/qcom,qcs615-qmp-usb3dp-phy.yaml | 13 ++++++++++---
 .../devicetree/bindings/phy/qcom,qusb2-phy.yaml  |  1 +
 drivers/phy/qualcomm/phy-qcom-qmp-usbc.c         |  2 +-
 drivers/phy/qualcomm/phy-qcom-qusb2.c            | 16 ++++++++++++++++
 4 files changed, 28 insertions(+), 4 deletions(-)

-- 
2.34.1