From: Jinseob Kim <kimjinseob88@gmail.com>
To: Jonathan Cameron <jic23@kernel.org>, linux-iio@vger.kernel.org
Cc: David Lechner <dlechner@baylibre.com>,
Nuno Sa <nuno.sa@analog.com>, Andy Shevchenko <andy@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
devicetree@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: [PATCH RFC v3 1/6] dt-bindings: iio: add OSF GREEN sensor aggregation device
Date: Fri, 29 May 2026 21:10:00 +0900 [thread overview]
Message-ID: <20260529121005.1470-2-kimjinseob88@gmail.com> (raw)
In-Reply-To: <20260529121005.1470-1-kimjinseob88@gmail.com>
Describe OSF GREEN as the first board target.
Add vendor prefix and MAINTAINERS binding entry.
Signed-off-by: Jinseob Kim <kimjinseob88@gmail.com>
---
.../iio/imu/opensensorfusion,osf-green.yaml | 43 +++++++++++++++++++
.../devicetree/bindings/vendor-prefixes.yaml | 2 +
MAINTAINERS | 5 +++
3 files changed, 50 insertions(+)
create mode 100644 Documentation/devicetree/bindings/iio/imu/opensensorfusion,osf-green.yaml
diff --git a/Documentation/devicetree/bindings/iio/imu/opensensorfusion,osf-green.yaml b/Documentation/devicetree/bindings/iio/imu/opensensorfusion,osf-green.yaml
new file mode 100644
index 000000000..626b41fb0
--- /dev/null
+++ b/Documentation/devicetree/bindings/iio/imu/opensensorfusion,osf-green.yaml
@@ -0,0 +1,43 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/iio/imu/opensensorfusion,osf-green.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OSF GREEN sensor aggregation board
+
+maintainers:
+ - Jinseob Kim <kimjinseob88@gmail.com>
+
+description: |
+ OSF GREEN is an STM32F405-based sensor aggregation board from the Open
+ Sensor Fusion open hardware project. It sends OSF0 capability, status, and
+ sample frames to a host over a UART link.
+
+ Open Sensor Fusion is not a generic industry standard. Public project and
+ hardware documentation is available at:
+
+ https://github.com/opensensorfusion
+ https://github.com/opensensorfusion/opensensorfusion-hardware
+
+allOf:
+ - $ref: /schemas/serial/serial-peripheral-props.yaml#
+
+properties:
+ compatible:
+ const: opensensorfusion,osf-green
+
+required:
+ - compatible
+
+unevaluatedProperties: false
+
+examples:
+ - |
+ serial {
+ sensor {
+ compatible = "opensensorfusion,osf-green";
+ };
+ };
+
+...
diff --git a/Documentation/devicetree/bindings/vendor-prefixes.yaml b/Documentation/devicetree/bindings/vendor-prefixes.yaml
index 28784d66a..f1b1f2ad3 100644
--- a/Documentation/devicetree/bindings/vendor-prefixes.yaml
+++ b/Documentation/devicetree/bindings/vendor-prefixes.yaml
@@ -1237,6 +1237,8 @@ patternProperties:
description: OpenPandora GmbH
"^openrisc,.*":
description: OpenRISC.io
+ "^opensensorfusion,.*":
+ description: Open Sensor Fusion project
"^openwrt,.*":
description: OpenWrt
"^option,.*":
diff --git a/MAINTAINERS b/MAINTAINERS
index c2c6d7927..26bbdf8d3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -19977,6 +19977,11 @@ F: Documentation/networking/oa-tc6-framework.rst
F: drivers/net/ethernet/oa_tc6.c
F: include/linux/oa_tc6.h
+OPEN SENSOR FUSION IIO DRIVER
+M: Jinseob Kim <kimjinseob88@gmail.com>
+S: Maintained
+F: Documentation/devicetree/bindings/iio/imu/opensensorfusion,osf-green.yaml
+
OPEN FIRMWARE AND FLATTENED DEVICE TREE
M: Rob Herring <robh@kernel.org>
M: Saravana Kannan <saravanak@kernel.org>
--
2.43.0
next prev parent reply other threads:[~2026-05-29 12:10 UTC|newest]
Thread overview: 15+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-29 12:09 [PATCH RFC v3 0/6] iio: add Open Sensor Fusion OSF0 UART driver Jinseob Kim
2026-05-29 12:10 ` Jinseob Kim [this message]
2026-05-29 16:31 ` [PATCH RFC v3 1/6] dt-bindings: iio: add OSF GREEN sensor aggregation device Conor Dooley
2026-05-29 17:14 ` Jonathan Cameron
2026-05-29 12:10 ` [PATCH RFC v3 2/6] Documentation: iio: add Open Sensor Fusion protocol v0 reference Jinseob Kim
2026-05-31 10:35 ` Jonathan Cameron
2026-05-29 12:10 ` [PATCH RFC v3 3/6] iio: osf: add protocol v0 decoding Jinseob Kim
2026-05-31 10:56 ` Jonathan Cameron
2026-06-02 23:07 ` Andy Shevchenko
2026-05-29 12:10 ` [PATCH RFC v3 4/6] iio: osf: add stream parser Jinseob Kim
2026-05-29 12:10 ` [PATCH RFC v3 5/6] iio: osf: add UART serdev transport Jinseob Kim
2026-05-31 11:23 ` Jonathan Cameron
2026-05-29 12:10 ` [PATCH RFC v3 6/6] iio: osf: register IIO devices from capabilities Jinseob Kim
2026-05-31 11:42 ` Jonathan Cameron
2026-05-31 10:25 ` [PATCH RFC v3 0/6] iio: add Open Sensor Fusion OSF0 UART driver Jonathan Cameron
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260529121005.1470-2-kimjinseob88@gmail.com \
--to=kimjinseob88@gmail.com \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®