mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Tanmay Shah <tanmay.shah@amd.com>
To: <andersson@kernel.org>, <mathieu.poirier@linaro.org>,
	<arnaud.pouliquen@foss.st.com>
Cc: <linux-kernel@vger.kernel.org>,
	<linux-remoteproc@vger.kernel.org>, <divin.raj@arm.com>
Subject: [PATCH v3 3/4] rpmsg: virtio_rpmsg_bus: get buffer size from config space
Date: Fri, 29 May 2026 09:43:27 -0700	[thread overview]
Message-ID: <20260529164327.1827121-4-tanmay.shah@amd.com> (raw)
In-Reply-To: <20260529164327.1827121-1-tanmay.shah@amd.com>

512 bytes isn't always suitable for all case, let firmware
maker decide the best value from resource table.
enable by VIRTIO_RPMSG_F_BUFSZ feature bit.

Signed-off-by: Tanmay Shah <tanmay.shah@amd.com>
---

Changes in v3:
  - change version field from u16 to u8
  - introduce size field in the rpmsg_virtio_config structure
  - check version field is set to any non-zero value.
  - check size field is not 0.
  - Remove field for private config, as not needed for now.
  - add documentation of rpmsg_virtio_config structure

 drivers/rpmsg/virtio_rpmsg_bus.c   | 90 ++++++++++++++++++++++++------
 include/linux/rpmsg/virtio_rpmsg.h | 34 +++++++++++
 2 files changed, 106 insertions(+), 18 deletions(-)
 create mode 100644 include/linux/rpmsg/virtio_rpmsg.h

diff --git a/drivers/rpmsg/virtio_rpmsg_bus.c b/drivers/rpmsg/virtio_rpmsg_bus.c
index 99df1ae07055..f1ab8e792f3d 100644
--- a/drivers/rpmsg/virtio_rpmsg_bus.c
+++ b/drivers/rpmsg/virtio_rpmsg_bus.c
@@ -20,6 +20,7 @@
 #include <linux/rpmsg.h>
 #include <linux/rpmsg/byteorder.h>
 #include <linux/rpmsg/ns.h>
+#include <linux/rpmsg/virtio_rpmsg.h>
 #include <linux/scatterlist.h>
 #include <linux/slab.h>
 #include <linux/sched.h>
@@ -39,7 +40,8 @@
  * @tx_bufs:	kernel address of tx buffers
  * @num_rx_buf: total number of rx buffers
  * @num_tx_buf: total number of tx buffers
- * @buf_size:   size of one rx or tx buffer
+ * @rx_buf_size: size of one rx buffer
+ * @tx_buf_size: size of one tx buffer
  * @last_tx_buf: index of last tx buffer used
  * @bufs_dma:	dma base addr of the buffers
  * @tx_lock:	protects svq and tx_bufs, to allow concurrent senders.
@@ -59,7 +61,8 @@ struct virtproc_info {
 	void *rx_bufs, *tx_bufs;
 	unsigned int num_rx_buf;
 	unsigned int num_tx_buf;
-	unsigned int buf_size;
+	unsigned int rx_buf_size;
+	unsigned int tx_buf_size;
 	int last_tx_buf;
 	dma_addr_t bufs_dma;
 	struct mutex tx_lock;
@@ -68,9 +71,6 @@ struct virtproc_info {
 	wait_queue_head_t sendq;
 };
 
-/* The feature bitmap for virtio rpmsg */
-#define VIRTIO_RPMSG_F_NS	0 /* RP supports name service notifications */
-
 /**
  * struct rpmsg_hdr - common header for all rpmsg messages
  * @src: source address
@@ -128,7 +128,9 @@ struct virtio_rpmsg_channel {
  * processor.
  */
 #define MAX_RPMSG_NUM_BUFS	(256)
-#define MAX_RPMSG_BUF_SIZE	(512)
+#define DEFAULT_RPMSG_BUF_SIZE	(512)
+
+#define RPMSG_VDEV_CONFIG_VER 1
 
 /*
  * Local addresses are dynamically allocated on-demand.
@@ -444,7 +446,7 @@ static void *get_a_tx_buf(struct virtproc_info *vrp)
 
 	/* either pick the next unused tx buffer */
 	if (vrp->last_tx_buf < vrp->num_tx_buf)
-		ret = vrp->tx_bufs + vrp->buf_size * vrp->last_tx_buf++;
+		ret = vrp->tx_bufs + vrp->tx_buf_size * vrp->last_tx_buf++;
 	/* or recycle a used one */
 	else
 		ret = virtqueue_get_buf(vrp->svq, &len);
@@ -514,7 +516,7 @@ static int rpmsg_send_offchannel_raw(struct rpmsg_device *rpdev,
 	 * messaging), or to improve the buffer allocator, to support
 	 * variable-length buffer sizes.
 	 */
-	if (len > vrp->buf_size - sizeof(struct rpmsg_hdr)) {
+	if (len > vrp->tx_buf_size - sizeof(struct rpmsg_hdr)) {
 		dev_err(dev, "message is too big (%d)\n", len);
 		return -EMSGSIZE;
 	}
@@ -647,7 +649,7 @@ static ssize_t virtio_rpmsg_get_mtu(struct rpmsg_endpoint *ept)
 	struct rpmsg_device *rpdev = ept->rpdev;
 	struct virtio_rpmsg_channel *vch = to_virtio_rpmsg_channel(rpdev);
 
-	return vch->vrp->buf_size - sizeof(struct rpmsg_hdr);
+	return vch->vrp->tx_buf_size - sizeof(struct rpmsg_hdr);
 }
 
 static int rpmsg_recv_single(struct virtproc_info *vrp, struct device *dev,
@@ -673,7 +675,7 @@ static int rpmsg_recv_single(struct virtproc_info *vrp, struct device *dev,
 	 * We currently use fixed-sized buffers, so trivially sanitize
 	 * the reported payload length.
 	 */
-	if (len > vrp->buf_size ||
+	if (len > vrp->rx_buf_size ||
 	    msg_len > (len - sizeof(struct rpmsg_hdr))) {
 		dev_warn(dev, "inbound msg too big: (%d, %d)\n", len, msg_len);
 		return -EINVAL;
@@ -706,7 +708,7 @@ static int rpmsg_recv_single(struct virtproc_info *vrp, struct device *dev,
 		dev_warn_ratelimited(dev, "msg received with no recipient\n");
 
 	/* publish the real size of the buffer */
-	rpmsg_sg_init(&sg, msg, vrp->buf_size);
+	rpmsg_sg_init(&sg, msg, vrp->rx_buf_size);
 
 	/* add the buffer back to the remote processor's virtqueue */
 	err = virtqueue_add_inbuf(vrp->rvq, &sg, 1, msg, GFP_KERNEL);
@@ -824,6 +826,8 @@ static int rpmsg_probe(struct virtio_device *vdev)
 	int err = 0, i;
 	size_t total_buf_space;
 	bool notify;
+	u8 version;
+	u16 size;
 
 	vrp = kzalloc_obj(*vrp);
 	if (!vrp)
@@ -855,9 +859,58 @@ static int rpmsg_probe(struct virtio_device *vdev)
 	else
 		vrp->num_tx_buf = MAX_RPMSG_NUM_BUFS;
 
-	vrp->buf_size = MAX_RPMSG_BUF_SIZE;
+	/*
+	 * If VIRTIO_RPMSG_F_BUFSZ feature is supported, then configure buf
+	 * size from virtio device config space from the resource table.
+	 * If the feature is not supported, then assign default buf size.
+	 */
+	if (virtio_has_feature(vdev, VIRTIO_RPMSG_F_BUFSZ)) {
+		virtio_cread(vdev, struct virtio_rpmsg_config,
+			     version, &version);
+		if (version == 0) {
+			dev_err(&vdev->dev, "invalid version of vdev config\n");
+			err = -EINVAL;
+			goto vqs_del;
+		}
+
+		/*
+		 * The size field is not used for the remoteproc virtio transport,
+		 * but kept for any future transport to use
+		 */
+		virtio_cread(vdev, struct virtio_rpmsg_config,
+			     size, &size);
+		if (size == 0) {
+			dev_err(&vdev->dev, "invalid size of vdev config\n");
+			err = -EINVAL;
+			goto vqs_del;
+		}
+
+		/* note: tx and rx are defined from remote view */
+		virtio_cread(vdev, struct virtio_rpmsg_config,
+			     txbuf_size, &vrp->rx_buf_size);
+		virtio_cread(vdev, struct virtio_rpmsg_config,
+			     rxbuf_size, &vrp->tx_buf_size);
+
+		/* The buffers must hold at least the rpmsg header */
+		if (vrp->rx_buf_size < sizeof(struct rpmsg_hdr) ||
+		    vrp->tx_buf_size < sizeof(struct rpmsg_hdr)) {
+			dev_err(&vdev->dev,
+				"bad vdev config: rx buf sz = %u, tx buf sz = %u\n",
+				vrp->rx_buf_size, vrp->tx_buf_size);
+			err = -EINVAL;
+			goto vqs_del;
+		}
+
+		dev_dbg(&vdev->dev,
+			"vdev config: version=%d, rx buf sz = 0x%x, tx buf sz = 0x%x\n",
+			version, vrp->rx_buf_size, vrp->tx_buf_size);
+	} else {
+		vrp->rx_buf_size = DEFAULT_RPMSG_BUF_SIZE;
+		vrp->tx_buf_size = DEFAULT_RPMSG_BUF_SIZE;
+	}
 
-	total_buf_space = (vrp->num_rx_buf + vrp->num_tx_buf) * vrp->buf_size;
+	total_buf_space = (vrp->num_rx_buf * vrp->rx_buf_size) +
+			  (vrp->num_tx_buf * vrp->tx_buf_size);
 
 	/* allocate coherent memory for the buffers */
 	bufs_va = dma_alloc_coherent(vdev->dev.parent,
@@ -875,14 +928,14 @@ static int rpmsg_probe(struct virtio_device *vdev)
 	vrp->rx_bufs = bufs_va;
 
 	/* and second part is dedicated for TX */
-	vrp->tx_bufs = bufs_va + vrp->num_rx_buf * vrp->buf_size;
+	vrp->tx_bufs = bufs_va + (vrp->num_rx_buf * vrp->rx_buf_size);
 
 	/* set up the receive buffers */
 	for (i = 0; i < vrp->num_rx_buf; i++) {
 		struct scatterlist sg;
-		void *cpu_addr = vrp->rx_bufs + i * vrp->buf_size;
+		void *cpu_addr = vrp->rx_bufs + i * vrp->rx_buf_size;
 
-		rpmsg_sg_init(&sg, cpu_addr, vrp->buf_size);
+		rpmsg_sg_init(&sg, cpu_addr, vrp->rx_buf_size);
 
 		err = virtqueue_add_inbuf(vrp->rvq, &sg, 1, cpu_addr,
 					  GFP_KERNEL);
@@ -965,8 +1018,8 @@ static int rpmsg_remove_device(struct device *dev, void *data)
 static void rpmsg_remove(struct virtio_device *vdev)
 {
 	struct virtproc_info *vrp = vdev->priv;
-	unsigned int num_bufs = vrp->num_rx_buf + vrp->num_tx_buf;
-	size_t total_buf_space = num_bufs * vrp->buf_size;
+	size_t total_buf_space = (vrp->num_rx_buf * vrp->rx_buf_size) +
+				 (vrp->num_tx_buf * vrp->tx_buf_size);
 	int ret;
 
 	virtio_reset_device(vdev);
@@ -992,6 +1045,7 @@ static struct virtio_device_id id_table[] = {
 
 static unsigned int features[] = {
 	VIRTIO_RPMSG_F_NS,
+	VIRTIO_RPMSG_F_BUFSZ,
 };
 
 static struct virtio_driver virtio_ipc_driver = {
diff --git a/include/linux/rpmsg/virtio_rpmsg.h b/include/linux/rpmsg/virtio_rpmsg.h
new file mode 100644
index 000000000000..77a530514d86
--- /dev/null
+++ b/include/linux/rpmsg/virtio_rpmsg.h
@@ -0,0 +1,34 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+/*
+ * Copyright (C) Pinecone Inc. 2019
+ * Copyright (C) Xiang Xiao <xiaoxiang@pinecone.net>
+ * Copyright (C) Advanced Micro Devices, Inc.
+ */
+
+#ifndef _LINUX_VIRTIO_RPMSG_H
+#define _LINUX_VIRTIO_RPMSG_H
+
+#include <linux/types.h>
+#include <linux/virtio_types.h>
+
+/* The feature bitmap for virtio rpmsg */
+#define VIRTIO_RPMSG_F_NS	0 /* RP supports name service notifications */
+#define VIRTIO_RPMSG_F_BUFSZ	1 /* RP get buffer size from config space */
+
+/**
+ * struct virtio_rpmsg_config - config space for rpmsg virtio device
+ *
+ * @version: version of this structure. current version is 1.
+ * @size:    size of this structure. unused for the remoteproc virtio backend.
+ * @txbuf_size: Tx buf size from remote's view. For Linux this is rx buf size.
+ * @rxbuf_size: Rx buf size from remote's view. For Linux this is tx buf size.
+ */
+struct virtio_rpmsg_config {
+	u8 version;
+	__virtio16 size;
+	/* The tx/rx individual buffer size(if VIRTIO_RPMSG_F_BUFSZ) */
+	__virtio32 txbuf_size;
+	__virtio32 rxbuf_size;
+} __packed;
+
+#endif /* _LINUX_VIRTIO_RPMSG_H */
-- 
2.34.1


  parent reply	other threads:[~2026-05-29 16:43 UTC|newest]

Thread overview: 16+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-29 16:43 [PATCH v3 0/4] Enhance RPMsg buffer management Tanmay Shah
2026-05-29 16:43 ` [PATCH v3 1/4] rpmsg: virtio_rpmsg_bus: rename rbufs and sbufs Tanmay Shah
2026-05-29 16:43 ` [PATCH v3 2/4] rpmsg: virtio_rpmsg_bus: allow different size of tx and rx bufs Tanmay Shah
2026-05-29 16:43 ` Tanmay Shah [this message]
2026-06-02  8:25   ` [PATCH v3 3/4] rpmsg: virtio_rpmsg_bus: get buffer size from config space Arnaud POULIQUEN
2026-06-04 20:31     ` Shah, Tanmay
2026-06-05  8:25       ` Arnaud POULIQUEN
2026-06-09 17:33         ` Shah, Tanmay
2026-06-11 17:31           ` Mathieu Poirier
2026-06-11 18:32             ` Shah, Tanmay
2026-05-29 16:43 ` [PATCH v3 4/4] samples: rpmsg: add MTU size info Tanmay Shah
2026-06-02  8:34   ` Arnaud POULIQUEN
2026-06-04 22:28     ` Shah, Tanmay
2026-06-09 16:11       ` Mathieu Poirier
2026-06-09 16:33         ` Shah, Tanmay
2026-06-11 17:46       ` Mathieu Poirier

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260529164327.1827121-4-tanmay.shah@amd.com \
    --to=tanmay.shah@amd.com \
    --cc=andersson@kernel.org \
    --cc=arnaud.pouliquen@foss.st.com \
    --cc=divin.raj@arm.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-remoteproc@vger.kernel.org \
    --cc=mathieu.poirier@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®