From: Paolo Bonzini <pbonzini@redhat.com>
To: linux-kernel@vger.kernel.org, kvm@vger.kernel.org
Cc: seanjc@google.com, Tom Lendacky <thomas.lendacky@amd.com>,
Michael Roth <michael.roth@amd.com>,
stable@vger.kernel.org
Subject: [PATCH 05/24] KVM: SEV: Use the size of the PSC header as the minimum size for PSC requests
Date: Fri, 29 May 2026 20:35:30 +0200 [thread overview]
Message-ID: <20260529183549.1104619-6-pbonzini@redhat.com> (raw)
In-Reply-To: <20260529183549.1104619-1-pbonzini@redhat.com>
From: Sean Christopherson <seanjc@google.com>
When handling a Page State Change (PSC) #VMGEXIT use the size of the PSC
header as the minimum size for the scratch area. Per the GHCB spec, PSC
requests do NOT provide the length, i.e. using control->exit_info_2 for the
length is completely made up behavior. The existing code "works", e.g.
even though Linux-as-a-guest always passes '0', because KVM doesn't do
anything with the length when the request is in the GHCB's shared buffer.
Use the header as the min length. Once the header is retrieved, KVM can
use the specified indices to compute the full size of the request.
Fixes: 9b54e248d264 ("KVM: SEV: Add support to handle Page State Change VMGEXIT")
Cc: stable@vger.kernel.org
Reviewed-by: Tom Lendacky <thomas.lendacky@amd.com>
Reviewed-by: Michael Roth <michael.roth@amd.com>
Signed-off-by: Sean Christopherson <seanjc@google.com>
Message-ID: <20260501202250.2115252-6-seanjc@google.com>
Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
---
arch/x86/kvm/svm/sev.c | 2 +-
1 file changed, 1 insertion(+), 1 deletion(-)
diff --git a/arch/x86/kvm/svm/sev.c b/arch/x86/kvm/svm/sev.c
index 52703c954856..cbb3040e0778 100644
--- a/arch/x86/kvm/svm/sev.c
+++ b/arch/x86/kvm/svm/sev.c
@@ -4559,7 +4559,7 @@ int sev_handle_vmgexit(struct kvm_vcpu *vcpu)
vcpu->run->system_event.data[0] = control->ghcb_gpa;
break;
case SVM_VMGEXIT_PSC:
- ret = setup_vmgexit_scratch(svm, true, control->exit_info_2);
+ ret = setup_vmgexit_scratch(svm, true, sizeof(struct psc_hdr));
if (ret)
break;
--
2.54.0
next prev parent reply other threads:[~2026-05-29 18:36 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-29 18:35 [PATCH 00/24] KVM: x86: fix various GHCB issues Paolo Bonzini
2026-05-29 18:35 ` [PATCH 01/24] KVM: SEV: Require in-GHCB scratch area if GHCB v2+ is in use Paolo Bonzini
2026-05-29 18:35 ` [PATCH 02/24] KVM: SEV: Ignore MMIO requests of length '0' Paolo Bonzini
2026-05-29 18:35 ` [PATCH 03/24] KVM: SEV: Reject MMIO requests larger than 8 bytes with GHCB v2+ Paolo Bonzini
2026-05-29 18:35 ` [PATCH 04/24] KVM: SEV: Ignore Port I/O requests of length '0' Paolo Bonzini
2026-05-29 18:35 ` Paolo Bonzini [this message]
2026-05-29 18:35 ` [PATCH 06/24] KVM: SEV: Compute the correct max length of the in-GHCB scratch area Paolo Bonzini
2026-05-29 18:35 ` [PATCH 07/24] KVM: SEV: WARN if KVM attempts to setup scratch area with min_len==0 Paolo Bonzini
2026-05-29 18:35 ` [PATCH 08/24] KVM: SEV: Don't explicitly pass PSC buffer to snp_begin_psc() Paolo Bonzini
2026-05-29 18:35 ` [PATCH 09/24] KVM: SEV: Check PSC request indices against the actual size of the buffer Paolo Bonzini
2026-05-29 18:35 ` [PATCH 10/24] KVM: SEV: Use READ_ONCE() when reading entries/indices from PSC buffer Paolo Bonzini
2026-05-29 18:35 ` [PATCH 11/24] KVM: SEV: Make it more obvious when KVM is writing back the current PSC index Paolo Bonzini
2026-05-29 18:35 ` [PATCH 12/24] KVM: SEV: Add an anonymous "psc" struct to track current PSC metadata Paolo Bonzini
2026-05-29 18:35 ` [PATCH 13/24] KVM: SEV: Read start/end indices of PSC requests exactly once per #VMGEXIT Paolo Bonzini
2026-05-29 18:35 ` [PATCH 14/24] KVM: Don't WARN if memory is dirtied without a vCPU when the VM is dying Paolo Bonzini
2026-05-29 18:35 ` [PATCH 15/24] KVM: SEV: Move sev_free_vcpu() down below sev_es_unmap_ghcb() Paolo Bonzini
2026-05-29 18:35 ` [PATCH 16/24] KVM: SEV: Decouple the need to sync the GHCB SA from the need to free the SA Paolo Bonzini
2026-05-29 18:35 ` [PATCH 17/24] KVM: SEV: Unmap and unpin the GHCB as needed on vCPU free Paolo Bonzini
2026-05-29 18:35 ` [PATCH 18/24] KVM: SEV: Don't terminate SNP VMs on #VMGEXIT without a registered GHCB Paolo Bonzini
2026-05-29 18:35 ` [PATCH 19/24] KVM: SEV: Move GHCB "usage" check out of sev_es_validate_vmgexit() Paolo Bonzini
2026-05-29 18:35 ` [PATCH 20/24] KVM: SEV: Return INVALID_EVENT for SNP-only #VMGEXIT from non-SNP guest Paolo Bonzini
2026-05-29 18:35 ` [PATCH 21/24] KVM: SEV: Return INVALID_INPUT, not MISSING_INPUT, for bad GUEST_REQUEST input(s) Paolo Bonzini
2026-05-29 18:35 ` [PATCH 22/24] KVM: SEV: Handle unknown #VMGEXIT reasons in sev_handle_vmgexit() Paolo Bonzini
2026-05-29 18:35 ` [PATCH 23/24] KVM: SEV: Turn sev_es_validate_vmgexit() into a dedicated predicate Paolo Bonzini
2026-05-29 18:35 ` [PATCH 24/24] KVM: SEV: Remove sometimes-used function-scoped "ret" from #VMGEXIT handler Paolo Bonzini
2026-05-30 16:27 ` [PATCH 00/24] KVM: x86: fix various GHCB issues Paolo Bonzini
2026-06-03 12:52 ` Sean Christopherson
2026-06-03 15:06 ` Paolo Bonzini
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260529183549.1104619-6-pbonzini@redhat.com \
--to=pbonzini@redhat.com \
--cc=kvm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=michael.roth@amd.com \
--cc=seanjc@google.com \
--cc=stable@vger.kernel.org \
--cc=thomas.lendacky@amd.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®