[PATCH v11 21/22] gpu: nova-core: add non-sec2 unload path

[John Hubbard <jhubbard@nvidia.com>]

From: Eliot Courtney <ecourtney@nvidia.com>

For non-sec2 it is only required to wait for GSP falcon to halt. This is
because GSP does the main work of unloading on GPUs not using sec2.

Signed-off-by: Eliot Courtney <ecourtney@nvidia.com>
[ jhubbard: use Result instead of Result<()> in the UnloadBundle impl ]
Signed-off-by: John Hubbard <jhubbard@nvidia.com>
---
 drivers/gpu/nova-core/gsp/hal/gh100.rs | 37 ++++++++++++++++++++++++--
 1 file changed, 35 insertions(+), 2 deletions(-)

diff --git a/drivers/gpu/nova-core/gsp/hal/gh100.rs b/drivers/gpu/nova-core/gsp/hal/gh100.rs
index 1f333a6f57a0..0076ca00a771 100644
--- a/drivers/gpu/nova-core/gsp/hal/gh100.rs
+++ b/drivers/gpu/nova-core/gsp/hal/gh100.rs
@@ -34,7 +34,10 @@
     gpu::Chipset,
     gsp::{
         boot::BootUnloadGuard,
-        hal::GspHal,
+        hal::{
+            GspHal,
+            UnloadBundle, //
+        },
         Gsp,
         GspFwWprMeta, //
     },
@@ -117,6 +120,28 @@ fn wait_for_gsp_lockdown_release(
     Ok(())
 }
 
+struct FspUnloadBundle;
+
+impl UnloadBundle for FspUnloadBundle {
+    fn run(
+        &self,
+        dev: &device::Device<device::Bound>,
+        bar: &Bar0,
+        gsp_falcon: &Falcon<GspEngine>,
+        _sec2_falcon: &Falcon<Sec2>,
+    ) -> Result {
+        // GSP falcon does most of the work of resetting, so just wait for it to finish.
+        read_poll_timeout(
+            || Ok(gsp_falcon.is_riscv_active(bar)),
+            |&active| !active,
+            Delta::from_millis(10),
+            Delta::from_secs(5),
+        )
+        .map(|_| ())
+        .inspect_err(|_| dev_err!(dev, "GSP falcon failed to halt\n"))
+    }
+}
+
 struct Gh100;
 
 impl GspHal for Gh100 {
@@ -133,11 +158,19 @@ fn boot<'a>(
         fb_layout: &FbLayout,
         wpr_meta: &Coherent<GspFwWprMeta>,
         gsp_falcon: &'a Falcon<GspEngine>,
-        _sec2_falcon: &'a Falcon<Sec2>,
+        sec2_falcon: &'a Falcon<Sec2>,
     ) -> Result<BootUnloadGuard<'a>> {
         let mut fsp_falcon = Falcon::<FspEngine>::new(dev, chipset)?;
         let fsp_fw = FspFirmware::new(dev, chipset, FIRMWARE_VERSION)?;
 
+        let unload_bundle = crate::gsp::UnloadBundle(
+            KBox::new(FspUnloadBundle, GFP_KERNEL)? as KBox<dyn UnloadBundle>
+        );
+
+        // Wrap the unload bundle into a drop guard so it is automatically run upon failure.
+        let _unload_guard =
+            BootUnloadGuard::new(gsp, dev, bar, gsp_falcon, sec2_falcon, Some(unload_bundle));
+
         Fsp::wait_secure_boot(dev, bar, chipset)?;
 
         let args = FmcBootArgs::new(
-- 
2.54.0