mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: srini@kernel.org
To: gregkh@linuxfoundation.org
Cc: linux-kernel@vger.kernel.org,
	Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>,
	stable@vger.kernel.org,
	Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>,
	Srinivas Kandagatla <srini@kernel.org>
Subject: [PATCH 5/8] slimbus: qcom-ngd-ctrl: Register callbacks after creating the ngd
Date: Sat, 30 May 2026 21:44:18 +0100	[thread overview]
Message-ID: <20260530204421.116824-6-srini@kernel.org> (raw)
In-Reply-To: <20260530204421.116824-1-srini@kernel.org>

From: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>

When the remoteproc starts in parallel with the NGD driver being probed,
or the remoteproc is already up when the PDR lookup is being registered,
or in the theoretical event that we get an interrupt from the hardware,
these callbacks will operate on uninitialized data. This result in
issues to boot the affected boards.

One such example can be seen in the following fault, where
qcom_slim_ngd_ssr_pdr_notify() schedules work on the NULL ngd_up_work.

[   21.858578] ------------[ cut here ]------------
[   21.858745] WARNING: kernel/workqueue.c:2338 at __queue_work+0x5e0/0x790, CPU#2: kworker/2:2/116
...
[   21.859251] Call trace:
[   21.859255]  __queue_work+0x5e0/0x790 (P)
[   21.859265]  queue_work_on+0x6c/0xf0
[   21.859273]  qcom_slim_ngd_ssr_pdr_notify+0x110/0x150 [slim_qcom_ngd_ctrl]
[   21.859304]  qcom_slim_ngd_ssr_notify+0x24/0x40 [slim_qcom_ngd_ctrl]
[   21.859318]  notifier_call_chain+0xa4/0x230
[   21.859329]  srcu_notifier_call_chain+0x64/0xb8
[   21.859338]  ssr_notify_start+0x40/0x78 [qcom_common]
[   21.859355]  rproc_start+0x130/0x230
[   21.859367]  rproc_boot+0x3d4/0x518
...

Move the enablement of interrupts, and the registration of SSR and PDR
until after the NGD device has been registered.

This could be further refined by moving initialization to the control
driver probe and by removing the platform driver model from the picture.

Fixes: 917809e2280b ("slimbus: ngd: Add qcom SLIMBus NGD driver")
Cc: stable@vger.kernel.org
Reviewed-by: Mukesh Ojha <mukesh.ojha@oss.qualcomm.com>
Signed-off-by: Bjorn Andersson <bjorn.andersson@oss.qualcomm.com>
Signed-off-by: Srinivas Kandagatla <srini@kernel.org>
---
 drivers/slimbus/qcom-ngd-ctrl.c | 45 +++++++++++++++++++--------------
 1 file changed, 26 insertions(+), 19 deletions(-)

diff --git a/drivers/slimbus/qcom-ngd-ctrl.c b/drivers/slimbus/qcom-ngd-ctrl.c
index e9238927cd2a..c1f26b7de519 100644
--- a/drivers/slimbus/qcom-ngd-ctrl.c
+++ b/drivers/slimbus/qcom-ngd-ctrl.c
@@ -1609,6 +1609,7 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct qcom_slim_ngd_ctrl *ctrl;
+	int irq;
 	int ret;
 	struct pdr_service *pds;
 
@@ -1622,20 +1623,16 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev)
 	if (IS_ERR(ctrl->base))
 		return PTR_ERR(ctrl->base);
 
-	ret = platform_get_irq(pdev, 0);
-	if (ret < 0)
-		return ret;
+	irq = platform_get_irq(pdev, 0);
+	if (irq < 0)
+		return irq;
 
-	ret = devm_request_irq(dev, ret, qcom_slim_ngd_interrupt,
-			       IRQF_TRIGGER_HIGH, "slim-ngd", ctrl);
+	ret = devm_request_irq(dev, irq, qcom_slim_ngd_interrupt,
+			       IRQF_TRIGGER_HIGH | IRQF_NO_AUTOEN,
+			       "slim-ngd", ctrl);
 	if (ret)
 		return dev_err_probe(&pdev->dev, ret, "request IRQ failed\n");
 
-	ctrl->nb.notifier_call = qcom_slim_ngd_ssr_notify;
-	ctrl->notifier = qcom_register_ssr_notifier("lpass", &ctrl->nb);
-	if (IS_ERR(ctrl->notifier))
-		return PTR_ERR(ctrl->notifier);
-
 	ctrl->dev = dev;
 	ctrl->framer.rootfreq = SLIM_ROOT_FREQ >> 3;
 	ctrl->framer.superfreq =
@@ -1657,24 +1654,34 @@ static int qcom_slim_ngd_ctrl_probe(struct platform_device *pdev)
 	init_completion(&ctrl->qmi_up);
 
 	ctrl->pdr = pdr_handle_alloc(slim_pd_status, ctrl);
-	if (IS_ERR(ctrl->pdr)) {
-		ret = dev_err_probe(dev, PTR_ERR(ctrl->pdr),
-				    "Failed to init PDR handle\n");
-		goto err_unregister_ssr;
-	}
+	if (IS_ERR(ctrl->pdr))
+		return dev_err_probe(dev, PTR_ERR(ctrl->pdr), "Failed to init PDR handle\n");
+
+	ret = of_qcom_slim_ngd_register(dev, ctrl);
+	if (ret)
+		goto err_pdr_release;
 
 	pds = pdr_add_lookup(ctrl->pdr, "avs/audio", "msm/adsp/audio_pd");
 	if (IS_ERR(pds) && PTR_ERR(pds) != -EALREADY) {
 		ret = dev_err_probe(dev, PTR_ERR(pds), "pdr add lookup failed\n");
-		goto err_pdr_release;
+		goto err_unregister_ngd;
+	}
+
+	ctrl->nb.notifier_call = qcom_slim_ngd_ssr_notify;
+	ctrl->notifier = qcom_register_ssr_notifier("lpass", &ctrl->nb);
+	if (IS_ERR(ctrl->notifier)) {
+		ret = PTR_ERR(ctrl->notifier);
+		goto err_unregister_ngd;
 	}
 
-	return of_qcom_slim_ngd_register(dev, ctrl);
+	enable_irq(irq);
 
+	return 0;
+
+err_unregister_ngd:
+	qcom_slim_ngd_unregister(ctrl);
 err_pdr_release:
 	pdr_handle_release(ctrl->pdr);
-err_unregister_ssr:
-	qcom_unregister_ssr_notifier(ctrl->notifier, &ctrl->nb);
 
 	return ret;
 }
-- 
2.53.0


  parent reply	other threads:[~2026-05-30 20:44 UTC|newest]

Thread overview: 9+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-05-30 20:44 [PATCH 0/8] slimbus: fixes for 7.1 srini
2026-05-30 20:44 ` [PATCH 1/8] slimbus: qcom-ngd-ctrl: fix OF node refcount srini
2026-05-30 20:44 ` [PATCH 2/8] slimbus: qcom-ngd-ctrl: Fix up platform_driver registration srini
2026-05-30 20:44 ` [PATCH 3/8] slimbus: qcom-ngd-ctrl: Fix probe error path ordering srini
2026-05-30 20:44 ` [PATCH 4/8] slimbus: qcom-ngd-ctrl: Correct PDR and SSR cleanup ownership srini
2026-05-30 20:44 ` srini [this message]
2026-05-30 20:44 ` [PATCH 6/8] slimbus: qcom-ngd-ctrl: Initialize controller resources in controller srini
2026-05-30 20:44 ` [PATCH 7/8] slimbus: qcom-ngd-ctrl: Balance pm_runtime enablement for NGD srini
2026-05-30 20:44 ` [PATCH 8/8] slimbus: qcom-ngd-ctrl: Avoid ABBA on tx_lock/ctrl->lock srini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260530204421.116824-6-srini@kernel.org \
    --to=srini@kernel.org \
    --cc=bjorn.andersson@oss.qualcomm.com \
    --cc=gregkh@linuxfoundation.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mukesh.ojha@oss.qualcomm.com \
    --cc=stable@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®