mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Gustavo Kenji Mendonça Kaneko" <kaneko.dev@pm.me>
To: theo.lebrun@bootlin.com, conor.dooley@microchip.com,
	andrew+netdev@lunn.ch, davem@davemloft.net, edumazet@google.com,
	kuba@kernel.org, pabeni@redhat.com
Cc: netdev@vger.kernel.org, linux-kernel@vger.kernel.org,
	"Gustavo Kenji Mendonça Kaneko" <kaneko.dev@pm.me>
Subject: [PATCH v2] net: macb: check return value of clk_prepare_enable() in runtime resume
Date: Mon, 01 Jun 2026 06:19:22 +0000	[thread overview]
Message-ID: <20260601061906.127174-1-kaneko.dev@pm.me> (raw)

macb_runtime_resume() calls clk_prepare_enable() five times but discards
the return value each time. clk_prepare_enable() is marked __must_check,
and if a clock fails to enable the driver would silently continue with
potentially unclocked hardware.

The symmetric disable path, macb_clks_disable(), already uses
clk_bulk_disable_unprepare(). Convert the enable path to the matching
clk_bulk_prepare_enable(), which enables the clocks as a group and, on
failure, unwinds the ones it already enabled before returning the error.

This was found by code review, not by an observed failure, and I do not
have macb hardware to test on; it is a robustness fix that propagates the
clk_prepare_enable() error instead of discarding it.

Signed-off-by: Gustavo Kenji Mendonça Kaneko <kaneko.dev@pm.me>
---
v2:
 - Reword the commit message: drop the misleading "atomically" wording
   (there is no locking involved) and describe this as a robustness fix
   found by code review rather than a fix for an observed bug.
 - Cc the networking maintainers that were missing from v1.

 drivers/net/ethernet/cadence/macb_main.c | 21 ++++++++++++---------
 1 file changed, 12 insertions(+), 9 deletions(-)

diff --git a/drivers/net/ethernet/cadence/macb_main.c b/drivers/net/ethernet/cadence/macb_main.c
index a12aa21244e8..85bd4ff0e4e6 100644
--- a/drivers/net/ethernet/cadence/macb_main.c
+++ b/drivers/net/ethernet/cadence/macb_main.c
@@ -6185,16 +6185,19 @@ static int __maybe_unused macb_runtime_resume(struct device *dev)
 {
 	struct net_device *netdev = dev_get_drvdata(dev);
 	struct macb *bp = netdev_priv(netdev);
+	struct clk_bulk_data clks[] = {
+		{ .clk = bp->pclk },
+		{ .clk = bp->hclk },
+		{ .clk = bp->tx_clk },
+		{ .clk = bp->rx_clk },
+		{ .clk = bp->tsu_clk },
+	};
 
-	if (!(device_may_wakeup(dev))) {
-		clk_prepare_enable(bp->pclk);
-		clk_prepare_enable(bp->hclk);
-		clk_prepare_enable(bp->tx_clk);
-		clk_prepare_enable(bp->rx_clk);
-		clk_prepare_enable(bp->tsu_clk);
-	} else if (!(bp->caps & MACB_CAPS_NEED_TSUCLK)) {
-		clk_prepare_enable(bp->tsu_clk);
-	}
+	if (!(device_may_wakeup(dev)))
+		return clk_bulk_prepare_enable(ARRAY_SIZE(clks), clks);
+
+	if (!(bp->caps & MACB_CAPS_NEED_TSUCLK))
+		return clk_prepare_enable(bp->tsu_clk);
 
 	return 0;
 }
-- 
2.54.0



             reply	other threads:[~2026-06-01  6:19 UTC|newest]

Thread overview: 3+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-01  6:19 Gustavo Kenji Mendonça Kaneko [this message]
2026-06-01 14:11 ` Andrew Lunn
2026-06-01 14:14 ` Alexander Lobakin

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260601061906.127174-1-kaneko.dev@pm.me \
    --to=kaneko.dev@pm.me \
    --cc=andrew+netdev@lunn.ch \
    --cc=conor.dooley@microchip.com \
    --cc=davem@davemloft.net \
    --cc=edumazet@google.com \
    --cc=kuba@kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=netdev@vger.kernel.org \
    --cc=pabeni@redhat.com \
    --cc=theo.lebrun@bootlin.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®