From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from smtp.kernel.org (aws-us-west-2-korg-mail-1.web.codeaurora.org [10.30.226.201]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id DE1CA48166E; Thu, 4 Jun 2026 14:14:03 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=10.30.226.201 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1780582444; cv=none; b=F7vHTE13TtzrwQjiPq3zp54ouMmRtxS7ri7p1knGKdSpui07qhGYC3KJdGCFLT4qGlxRfGil2zRSjNKm8CKPBxbWYD/lb4yzmFse3i3wdPzUa9p6LoWii6E0GAuKGbh6TLQqZNvTDVEiBAVQOVNtMqSwRVBz5R70kD2b4uNXfgc= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1780582444; c=relaxed/simple; bh=mnVzkib6jCri5gNmTF18gKNBhaQJpKfWMofa8X1xGzs=; h=From:Subject:Date:Message-Id:MIME-Version:Content-Type:To:Cc; b=OWHa99znv49T5eX+ji50VUlOtL2h+D/ficQrr0G06cT8HRsLOcVZljhZFtnEBve5+Lg2+HM6+dBJKBIblrKzBBWH8YX9Gx2Xkfmfmrw6adjdvAQZ8pqA5+GbOM7jc+8ES4m0aQN+gCvd7ItUy0X7HkLYw3b18cL/HX4xlqyxFQ0= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b=CjXGFM3p; arc=none smtp.client-ip=10.30.226.201 Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=kernel.org header.i=@kernel.org header.b="CjXGFM3p" Received: by smtp.kernel.org (Postfix) with ESMTPS id 55683C2BCC6; Thu, 4 Jun 2026 14:14:03 +0000 (UTC) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/simple; d=kernel.org; s=k20201202; t=1780582443; bh=mnVzkib6jCri5gNmTF18gKNBhaQJpKfWMofa8X1xGzs=; h=From:Subject:Date:To:Cc:Reply-To:From; b=CjXGFM3p+IWIyjDcc32nzSv/9POMrSp8tpUpEUGNtz3PAWMCuDvo6WBjbMPSrzqS0 1I0dFiGM/Ch3t9ECR3hNOlCUBK8boqB/AKKauJ1mt9nodMEixM88sY1drLocJy4QHH w7z3gqFpry+qi0FKWNG2G18+dT/1T6HCBADDhbhUfvGSdh2DcVhuFUUXLawAY4VbBo UxqnbJfMakpB9sKO+63nBT8TeuTZmMpoLMHjmdS6nDQGkUtpYT21zoWa9xEiMRSK/f dKsfvWdGJYMSh1NLgLDMhQtmhsxiQGkbP+zv23ksig00XiszyHl6rQug1T+YB7tzWa t9rr/7oJ2OV5A== Received: from aws-us-west-2-korg-lkml-1.web.codeaurora.org (localhost.localdomain [127.0.0.1]) by smtp.lore.kernel.org (Postfix) with ESMTP id 329B6CD6E6D; Thu, 4 Jun 2026 14:14:03 +0000 (UTC) From: Dumitru Ceclan via B4 Relay Subject: [PATCH v13 00/22] media: i2c: add Maxim GMSL2/3 serializer and deserializer drivers Date: Thu, 04 Jun 2026 17:13:47 +0300 Message-Id: <20260604-gmsl2-3_serdes-v13-0-9d8a4919983b@analog.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset="utf-8" Content-Transfer-Encoding: 8bit X-B4-Tracking: v=1; b=H4sIABuIIWoC/23PS2rDMBCA4asErasyo5c9WfUeJRRbD0eQ2MUqJ iX47h2HlrRVVmIG/k/SVZQ451jEfncVc1xyydPIA+qnnfDHbhyizIEXQoGyiNDI4VxOSuo3DkM sUifVt61VQF4Ljt7nmPLlJr4eeD7m8jHNn7cLlnbbflNo/lNLK0GaxhAFgoYIXrqxO03Ds5/OY rMW+ukdaMSqp61H7hMQgElVj3AHDLgKQGDBGWsdpBh8Z2sB74J98ARegUwenYZG89HXgvolqAe CYqFXLpAi/iS5P8K6rl+CshVBtAEAAA== X-Change-ID: 20251107-gmsl2-3_serdes-3f2b885209c3 To: Tomi Valkeinen , Mauro Carvalho Chehab , Sakari Ailus , Laurent Pinchart , Julien Massot , Rob Herring , =?utf-8?q?Niklas_S=C3=B6derlund?= , Greg Kroah-Hartman Cc: mitrutzceclan@gmail.com, linux-media@vger.kernel.org, linux-kernel@vger.kernel.org, devicetree@vger.kernel.org, linux-staging@lists.linux.dev, linux-gpio@vger.kernel.org, =?utf-8?q?Niklas_S=C3=B6derlund?= , Martin Hecht , Tomi Valkeinen , Cosmin Tanislav , Vivekananda Dayananda , Dumitru Ceclan , Cory Keitz X-Mailer: b4 0.14.3 X-Developer-Signature: v=1; a=ed25519-sha256; t=1780582440; l=21006; i=dumitru.ceclan@analog.com; s=20240313; h=from:subject:message-id; bh=mnVzkib6jCri5gNmTF18gKNBhaQJpKfWMofa8X1xGzs=; b=q9YM558TyscjNKwxv1VUlNmY0P7Ia9X/z4NoeAAyqPTMqsklzoxNIAuV2GpFkYixpDhlIVGGt uZcntiz00VXAqU9AJcv0fozHxkVXF8AjW2Nu9Nb/XkFPxrwW2j41y3G X-Developer-Key: i=dumitru.ceclan@analog.com; a=ed25519; pk=HdqMlVyrcazwoiai7oN6ghU+Bj1pusGUFRl30jhS7Bo= X-Endpoint-Received: by B4 Relay for dumitru.ceclan@analog.com/20240313 with auth_id=140 X-Original-From: Dumitru Ceclan Reply-To: dumitru.ceclan@analog.com This series adds new drivers for multiple Maxim GMSL2 and GMSL3 devices, replacing the few GMSL2 drivers already in upstream, and introducing a common framework that can be used to implement such GMSL chips, which avoids code duplication while also adding support for previously unsupported features. While the normally acceptable and polite way would be to extend the current mainline drivers, the choice was made here to add a totally new set of drivers. The current drivers support only a small subset of the possible features, and only a few devices, so the end result after extending them would in any case be essentially fully rewritten, new drivers. This series depends on support for internal pads, for which a patch has been added. The previous version is at: v12: https://lore.kernel.org/r/20260521-gmsl2-3_serdes-v12-0-b26d92931196@analog.com Since the previous series, Cosmin has left Analog Devices. Because included changes from previous version are trivial, his sign-off and tags were retained. The following deserializers are supported: * MAX96712 (already exists in staging) * MAX96714 (already exists) * MAX96714F (already exists) * MAX96714R (GMSL2) * MAX96716 (GMSL2) * MAX96724 (already exists as part of existing MAX96712 driver) * MAX96724F (GMSL2) * MAX96724R (GMSL2) * MAX9296A (GMSL2) * MAX96792A (GMSL3) The following serializers are supported: * MAX96717 (already exists) * MAX9295A (GMSL2) * MAX96793 (GMSL3) The following list enumerates new features that are supported by the common framework and their respective chip-specific drivers: * Full Streams API support. Most deserializers have support for more than one link, and more than one PHY. Streams support allows configuration of routing between these links and PHYs. * .get_frame_desc() support. Both the serializers and deserializers implement this to query and provide frame descriptor data. This is used in features explained in-depth below. * .get_mbus_config() support. The deserializers implement this to allow upstream devices to query the link frequency of its pads. * Address translation with I2C ATR for the serializers. * I2C ATR translation - some deserializers cannot do muxing since I2C communication channel masking is not available per-link, and the only other way to select links is to turn them off, causing link resets. For such cases, I2C ATR is used to change the address of the serializers at probe time. * Automatic GMSL link version negotiation between GMSL3, GMSL2 6Gbps, GMSL2 3Gbps. * Automatic stream id selection for deserializers which need serializers to stream on unique stream ids. * Automatic VC remapping on the deserializers. VCs are picked so that if they were unique on the sink pad, they will end up as unique on the source pad they are routed to too, prioritizing using the same VC ID as the sink pad, to facilitate the possibility of using tunnel mode. * Automatic pixel mode / tunnel mode selection. Tunnel mode is used when VC IDs do not need to be changed and all hardware supports tunnel mode, otherwise, pixel mode is used. The serializers are automatically switched between the two by using a private API. * Automatic double mode selection. In pixel mode, double mode can be used to pack two pixels into a single data unit, optimizing bandwidth usage. The serializers are automatically set up to support the double modes determined by the deserializers using a private API. * Automatic data padding. In pixel mode, if the data being transferred uses two different BPPs, data needs to be padded. The serializers automatically set this up depending on the configured double mode settings and incoming data types. * Logging. Both the deserializers and serializers implement the V4L2 .log_status() ops to allow debugging of the internal state and important chip status registers. * PHY modes. Deserializer chips commonly have more than a single PHY. The firmware ports are parsed to determine the modes in which to configure the PHYs (2x4, 4x2, 1x4+2x2, 2x2+1x4, and variations using fewer lanes). * Serializer pinctrl. Serializers implement pinctrl to allow setting configs which would otherwise be inaccessible through GPIO: TX/RX via GMSL link, pull-up & pull-down (with strength), open-drain & push-pull, slew rate, RCLK pin selection. * TPG with selectable formats, resolutions and framerates for both serializers and deserializers. The drivers have been tested on the following hardware combinations, but further testing is welcome to ensure no / minimal breakage: * Raspberry Pi 5 + MAX9296A + 2xMAX96717 + 2xIMX219 * Raspberry Pi 5 + MAX96714 + 1xMAX96717 + 1xIMX219 * Raspberry Pi 5 + MAX96716A + 2xMAX96717 + 2xIMX219 * Raspberry Pi 5 + MAX96712 + 4xMAX96717 + 4xIMX219 * Raspberry Pi 5 + MAX96724 + 4xMAX96717 + 4xIMX219 * Raspberry Pi 5 + MAX96792A + 1xMAX96793 + 1xMAX96717 + 2xIMX219 * Raspberry Pi 5 + MAX96792A + 2xMAX96717 + 2xIMX219 * Renesas V4H + MAX96712 + 2xMAX96717 + 2xIMX219 Analog Devices is taking responsibility for the maintenance of these drivers and common framework, and plans to add support for new broad-market chips on top of them. Special thanks go to Tomi Valkeinen < tomi.valkeinen+renesas@ideasonboard.com> for testing the drivers, helping debug and coming up with ideas / implementations for various features. V13: max_serdes: * fix NULL check on source pointer, check source->sd instead * copy old streams_masks before applying deltas to preserve unaffected pads max_ser: * drop get_mbus_config from commit message * zero-initialize frame descriptor in max_ser_route_to_hw * return early after WARN_ON in max_ser_i2c_atr_detach_addr * clean up ATR on i2c_atr_add_adapter failure * put fwnode after truthiness check in max_ser_i2c_adapter_init * free ctrl_handler in max_ser_v4l2_unregister * put ep fwnode when fwnode_graph_get_remote_endpoint fails * hold active state lock in max_ser_log_status * add bounds check in max_ser_get_pipe_vcs_dts * guard against bpps=0 before __ffs/__fls in max_ser_get_pipe_mode max_des: * zero-initialize frame descriptor in max_des_route_to_hw * validate stream_id before indexing stack array * check vc_remaps pointer instead of count before devm_kfree * goto err_add_adapters on select_links failure in max_des_i2c_atr_init * fix notifier chan_id mapping for sparse links by matching adapter pointer * initialize fd->num_entries in max_des_get_frame_desc_state * goto err_free_streams_masks on set_vc_remaps failure * clear source->sd on media_create_pad_link failure * roll back enabled regulators on partial enable failure * put source ep_fwnode handles in max_des_v4l2_unregister * use HZ_PER_MHZ for link frequency constants * change link_frequency from s64 to u64 max96717: * add missing VIDEO_DEV Kconfig dependency * move OUTPUT_ENABLE/INPUT_ENABLE to value-returning case block * use dev_dbg instead of dev_warn in max96717_clk_determine_rate max96724: * add missing VIDEO_DEV Kconfig dependency * fix BIT(p) to BIT((p) % 4) in MAX96724_BACKTOP32_BPP12 * use u64 for dpll_freq to avoid truncation * skip absorbed PHYs in max96724_set_phy_enable * use devm_add_action_or_reset for power-off cleanup * fix PHY standby bit comment to match actual bit positions max9296a: * add missing VIDEO_DEV Kconfig dependency * use stream_id parameter instead of pipe->stream_id * use devm_add_action_or_reset for power-off cleanup * add missing .set_pipe_link to max96792a_ops V12: * max_serdes: drop custom field_get/prep custom macros * max96717: use new clock ops function determine_rate() * fix git diff context for patches 20-22 V11: * max96724: preserve cc_port_cfg in select_links() V10: * dt-bindings: add control-channel property * max96724: add configurable control-channel port selection * max-ser/max-des: fix VIDIOC_SUBDEV_G/S_FMT, detect ~0U format (v4l2-test-subdevs.cpp:448: s_fmt.format.code == ~0U) * max-ser/max-des: fix VIDIOC_SUBDEV_G/S_FRAME_INTERVAL fail: add max_(ser/des)_get_frame_interval returning -ENOTTY for non-TPG pads and streams (v4l2-test-subdevs.cpp:302: node->enum_frame_interval_pad != (int)pad) V9: * split max_des_ops into *_info and *_ops * use read_poll_timeout macro in *_wait_for_device() * return read_poll_timeout error -ETIMEDOUT in *_wait_for_device() * remove use_atr duplicate from max9296a_chip_info, present in max_des_info * fix max9296a DPLL register offset * fix C-PHY DPLL frequency in max9296a and max96724 reported by: Cory Keitz * use MAX9296A_COMMON_INFO and MAX9296A_COMMON_OPS to simplify probe ops init * fix borked patches in previous version, actually remove MAX96717 and MAX96714 drivers V8: * max96717: use the renamed PIN_CONFIG_OUTPUT to _LEVEL * max96717: use the renamed set_rv ops from struct gpio_chip * dt-bindings: set minItems lane-polarities to 2 * dt-bindings: "add myself as maintainer" commits were removed * max_des & max_ser: use a default format for set_routing * max_des & max_ser: return ENNOTTY in *_frame_interval for non-TPG pads V7: * dt-bindings: max9296a: use full max96717 compatible * max9296a: make max96714_rlms_reg_sequence static * explicitly include linux/bitfield.h * explicitly depend on I2C and PINCTRL * sort media_entity_operations * add has_pad_interdep to media_entity_operations V6: * max9296a: put rlms sequence in max9296a_chip_info * max_des: reflow stream id a comment * max_ser: remove exported symbols not used in other modules * max_ser: init mode to a supported value * add default routing * MAX_SERDES_GMSL_3 -> MAX_SERDES_GMSL_3_12GBPS * guard reg_read/write with CONFIG_VIDEO_ADV_DEBUG * put exported symbols in MAXIM_SERDES namespace V5: * dt-bindings: max96717: restrict RCLKOUT to pins 2 & 4 * dt-bindings: max96717: remove confusing rclksel pinconf property * dt-bindings: max96717: remove maxim,gmsl-tx/rx pinconf property * dt-bindings: max96717: remove gmsl prefix from maxim,gmsl-tx-id/rx-id * dt-bindings: max96717: remove minimum: 0 * dt-bindings: max96717: better document slew-rate * dt-bindings: max96717: better document maxim,jitter-compensation * dt-bindings: max96717: better document maxim,tx-id/rx-id * max_serdes: add default TPG values * max_serdes: remove MAX_MIPI_FMT macro * max_serdes: EXPORT_SYMBOL -> EXPORT_SYMBOL_GPL * max_serdes: remove EXPORT_SYMBOL_GPL from symbols not used in other modules * max_serdes: rename symbols/macros/types to have max_serdes prefix * max_serdes: slim down TPG functions * max_des: fix may be used uninitialized errors * max_des: fix misplaced TPG validation * max_des: fix setting pipe PHY in tunnel mode for chips that support both set_pipe_phy() and set_pipe_tunnel_phy() * max_des: move doubled_bpp/sink_bpps variables to usage place * max_des: do not dynamically control PHY enable, letting lanes be in LP-11 when not streaming * max_des: refactor get/set_pipe_stream_id() logic * max_des: remove explicit ret = 0 * max_ser: make VC remaps not pipe-specific, allocate dynamically * max9296a: add missing 1080p30 TPG entry * max9296a: move BIT() left shift into macro * max9296a: move BIT() ternary into macro * max9296a: reuse max_des_ops for chip-specific ops\ * max9296a: document and compress RLMS register writes * max96717: restrict RCLKOUT to pins 2 & 4 because of hardware capabilities * max96717: add support for XTAL/1, XTAL/2, XTAL/4 clocks * max96717: set RX_EN/TX_EN automatically * max96717: reorder custom pinconf flags * max96717: drop OF dependency * drop of_match_ptr * re-do some indentation * implement TPG pattern control * remove pr_info() usage * inline lane polarity val = 0 * inline returns * rewrite some Kconfig docs * split up patches for easier review V4: * max_des: fix infinite version loop * max_des: fix pipe link id when there are more pipes than links * max_des: implement setting pipe link * max_des: do not pass routing to phy update * max_des: move GMSL version strings to max_serdes * max_des: split finding existing VC remap from adding a new one * max_des: add tracking for in-use pipes * max_des: skip unused pipes when finding / setting pixel/tunnel mode * max_des: simplify remap code * max_des: split set_pipe_phy() into set_pipe_tunnel_phy() * max_ser: clean up i2c_xlates printing * max_ser: fix changing serializer address * max_ser: move non-continuous mode check into max96717 driver * max96724: use regmap_set_bits for STREAM_SEL_ALL * max96724: match surrounding indent for MAX96724_PHY1_ALT_CLOCK * max96724: fix setting invalid PHY to 1 when PHY 0 is in 4-lane mode * max96724: remove support for setting pipe phy from max96712 * max96724: fix setting double mode on pipes 4-7 * max96724: drop powerdown gpios * max96717: use gpio_chip's set_rv * max9296a: switch versions to unsigned int * max9296a: remove parantheses from MAX9296A_MIPI_PHY18/20 * max9296a: fix printing of PHY packet counts * max9296a: fix phy_hw_ids size * remove usage of cammel case in defines * move field_get/prep to max_serdes.h * rework stream id setup * rework tunnel/pixel mode finding * rework bpps retrieval * pass whole subdev state around * add helper for retrieving a route's hw components / frame desc * update pipe enable based on active routes * add support for tunnel-only chips and VC remaps in tunnel mode * simplify max_get_streams_masks() * add support for TPG V3: * dt-bindings: drop reflow text patches * dt-bindings: max96717: move pinctrl configuration into main file * dt-bindings: max96717: allow a single level of pins configuration * dt-bindings: max96717: use regex for matching pins nodes * dt-bindings: max96717: drop extra allOf in pinctrl configuration * dt-bindings: max96717: fix i2c-atr channel name regex * dt-bindings: max96717: limit pinctrl functions to gpio / rclkout * dt-bindings: max96717: limit pins for gpio / rclkout * dt-bindings: max96717: add description for bias-pull-up/down * dt-bindings: max96717: require pins and function properties * dt-bindings: max96717: turn single compatible strings into an enum * dt-bindings: max9296a: include indices in port descriptions * dt-bindings: max9296a: remove property-less schema from input ports * dt-bindings: max9296a: use ATR for MAX96716A too, removing MUX entirely * dt-bindings: max96712: include indices in port descriptions * dt-bindings: max96712: deprecate enable-gpios in favor of powerdown-gpios * dt-bindings: max96712: switch from MUX to ATR * dt-bindings: max96714: add support for MAX96714R * max_des: fix POC NULL check * max_des: remove index var in POC enable * max_des: fix writing empty remaps * max_des: skip mode setting in tunnel mode * max_des: remove a duplicate source->sd NULL check * max_des: set pipe tunnel mode even for disabled links * max_ser: apply TX ID changes irrespective of serializer ID * max9296a: fix typo in BACKTOP22 * max9296a: make register macros more consistent * max9296a: switch MAX96716 from MUX to ATR * max9296a: deduplicate max9296a_phy_id() logic * max9296a: use proper PHY id in remaps * max9296a: fix DPLL reset clear * max9296a: limit MAX96714F to GMSL2 3Gbps * max9296a: add support for MAX96714R * max9296a: do not write GMSL3 link select registers in GMSL2 devices * max9296a: use field_prep when setting RX_RATE * max9296a: simplify setting SEL_STREAM for MAX96714 * max9296a: max96716_set_pipe_phy -> max96716a_set_pipe_phy * max9296a: fix off-by-one in lane polarity when using polarity_on_physical_lanes * max96724: fix typo in BACKTOP22 * max96724: switch from MUX to ATR * max96724: add support for powerdown GPIO * max96724: remove support for tunneling from MAX96712 * max96724: only set tunnel-related bits when in tunnel mode * max96724: add support for MAX96724F/R * max96724: oneshot reset links after link selection * remove GMSL2 version defaults, set all supported versions explicitly * reorder GMSL versions to start from 0 * add support for GMSL2 3Gbps * support GMSL version finding for devices using MUX / GATE * add support for deserializers which don't have individual control of each link's GMSL version * add support for deserializers that need unique stream ids across all serializers * select_link_version -> set_link_version * select_resets_link -> use_atr V2: * add missing compatible for MAX96717F * fix embarrassing dt-bindings mistakes * move MAX9296A/MAX96716/MAX96792A to a separate file as they have two links / PHYs, and adding those conditionally seems impossible --- To: Tomi Valkeinen To: Mauro Carvalho Chehab To: Sakari Ailus To: Laurent Pinchart To: Julien Massot To: Rob Herring To: Niklas Söderlund To: Greg Kroah-Hartman Cc: mitrutzceclan@gmail.com Cc: linux-media@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: devicetree@vger.kernel.org Cc: linux-staging@lists.linux.dev Cc: linux-gpio@vger.kernel.org Cc: Niklas Söderlund Cc: Martin Hecht --- Cosmin Tanislav (20): dt-bindings: media: i2c: max96717: add support for I2C ATR dt-bindings: media: i2c: max96717: add support for pinctrl/pinconf dt-bindings: media: i2c: max96717: add support for MAX9295A dt-bindings: media: i2c: max96717: add support for MAX96793 dt-bindings: media: i2c: max96712: use pattern properties for ports dt-bindings: media: i2c: max96712: add support for I2C ATR dt-bindings: media: i2c: max96712: add support for POC supplies dt-bindings: media: i2c: max96712: add support for MAX96724F/R dt-bindings: media: i2c: max96714: add support for MAX96714R dt-bindings: media: i2c: add MAX9296A, MAX96716A, MAX96792A media: i2c: add Maxim GMSL2/3 serializer and deserializer framework media: i2c: add Maxim GMSL2/3 serializer framework media: i2c: add Maxim GMSL2/3 deserializer framework media: i2c: maxim-serdes: add MAX96717 driver media: i2c: maxim-serdes: add MAX96724 driver media: i2c: maxim-serdes: add MAX9296A driver arm64: defconfig: disable deprecated MAX96712 driver staging: media: remove MAX96712 driver media: i2c: remove MAX96717 driver media: i2c: remove MAX96714 driver Dumitru Ceclan (1): dt-bindings: media: i2c: max96712: add control-channel-port property Sakari Ailus (1): media: mc: Add INTERNAL pad flag .../bindings/media/i2c/maxim,max9296a.yaml | 242 ++ .../bindings/media/i2c/maxim,max96712.yaml | 73 +- .../bindings/media/i2c/maxim,max96714.yaml | 5 +- .../bindings/media/i2c/maxim,max96717.yaml | 154 +- .../userspace-api/media/mediactl/media-types.rst | 9 + MAINTAINERS | 10 +- arch/arm64/configs/defconfig | 1 - drivers/media/i2c/Kconfig | 34 +- drivers/media/i2c/Makefile | 3 +- drivers/media/i2c/max96714.c | 1017 ------ drivers/media/i2c/max96717.c | 1104 ------- drivers/media/i2c/maxim-serdes/Kconfig | 63 + drivers/media/i2c/maxim-serdes/Makefile | 6 + drivers/media/i2c/maxim-serdes/max9296a.c | 1369 +++++++++ drivers/media/i2c/maxim-serdes/max96717.c | 1688 ++++++++++ drivers/media/i2c/maxim-serdes/max96724.c | 1279 ++++++++ drivers/media/i2c/maxim-serdes/max_des.c | 3243 ++++++++++++++++++++ drivers/media/i2c/maxim-serdes/max_des.h | 157 + drivers/media/i2c/maxim-serdes/max_ser.c | 2184 +++++++++++++ drivers/media/i2c/maxim-serdes/max_ser.h | 147 + drivers/media/i2c/maxim-serdes/max_serdes.c | 413 +++ drivers/media/i2c/maxim-serdes/max_serdes.h | 181 ++ drivers/media/mc/mc-entity.c | 15 +- drivers/staging/media/Kconfig | 2 - drivers/staging/media/Makefile | 1 - drivers/staging/media/max96712/Kconfig | 14 - drivers/staging/media/max96712/Makefile | 2 - drivers/staging/media/max96712/max96712.c | 487 --- include/uapi/linux/media.h | 1 + 29 files changed, 11216 insertions(+), 2688 deletions(-) --- base-commit: 05418e6ae57234644f9b52d74f913706a64a3de4 change-id: 20251107-gmsl2-3_serdes-3f2b885209c3 Best regards, -- Dumitru Ceclan