From: William Hansen-Baird <william.hansen.baird@gmail.com>
To: pkshih@realtek.com
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org,
William Hansen-Baird <williamhb+k@fastmail.com>
Subject: [PATCH] wifi: rtlwifi: rtl8723be: Remove unnecessary irq save/restore in hw_init()
Date: Mon, 8 Jun 2026 15:53:47 +0200 [thread overview]
Message-ID: <20260608135345.2526325-3-williamhb+k@fastmail.com> (raw)
rtl8723be hw_init() calls local_save_flags(flags) followed by
local_irq_enable(). Later, local_irq_restore(flags) is called.
This causes warnings from Lockdep on boot and modprobe,
as local_irq_restore(flags) should only be called while irqs are disabled.
With testing I found that all paths which call hw_init() have irqs
already enabled for rtl8723be.
Furthermore, the calls were originally added for the rtl8192ce
in commit f78bccd79ba3 ("rtlwifi: rtl8192ce: Fix too long disable of IRQs")
before later being added to most other rtlwifi drivers.
Commit d3feae41a347 ("rtlwifi: Update power-save routines for 062814 driver")
then replaces the call to spin_lock_irqsave() before hw_init(),
and thus the codepath which caused irqs to be disabled in hw_init and
prompted the original commit has been removed.
The same irq save/restore pattern is also present in the hw_init() of
rtl8192ce, rtl8723ae, rtl8188ee, rtl8192se and rtl8192cu,
however I don't have the hardware to test them,
so I did not include them in my changes.
Tested on a Razer Blade 14 2017.
Example of output from Lockdep prior to fix:
[ 2305.476471] raw_local_irq_restore() called with IRQs enabled
...
[ 2305.478709] Call Trace:
[ 2305.478731] <TASK>
[ 2305.478753] rtl8723be_hw_init+0x5992/0x7220 [rtl8723be]
[ 2305.478798] ? static_obj+0x61/0xa0
[ 2305.478848] rtl_pci_start+0x222/0x5c0 [rtl_pci]
[ 2305.478891] rtl_op_start+0x128/0x1a0 [rtlwifi]
[ 2305.478940] ? __kasan_check_read+0x11/0x20
[ 2305.480082] drv_start+0x16c/0x550 [mac80211]
...
[ 2305.570855] irq event stamp: 887679
[ 2305.571569] hardirqs last enabled at (887689): [<ffffffff96511170>] __up_console_sem+0x90/0xa0
[ 2305.572347] hardirqs last disabled at (887698): [<ffffffff96511155>] __up_console_sem+0x75/0xa0
[ 2305.573076] softirqs last enabled at (887670): [<ffffffff962f4675>] __irq_exit_rcu+0x175/0x2f0
[ 2305.573817] softirqs last disabled at (887649): [<ffffffff962f4675>] __irq_exit_rcu+0x175/0x2f0
[ 2305.574636] ---[ end trace 0000000000000000 ]---
Link: https://lore.kernel.org/all/20210111153707.10071-1-mark.rutland@arm.com/
Signed-off-by: William Hansen-Baird <williamhb+k@fastmail.com>
---
drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c | 6 ------
1 file changed, 6 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
index e1f811218894..bf7b5a32adaa 100644
--- a/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
+++ b/drivers/net/wireless/realtek/rtlwifi/rtl8723be/hw.c
@@ -1333,11 +1333,6 @@ int rtl8723be_hw_init(struct ieee80211_hw *hw)
bool rtstatus = true;
int err;
u8 tmp_u1b;
- unsigned long flags;
-
- /* reenable interrupts to not interfere with other devices */
- local_save_flags(flags);
- local_irq_enable();
rtlhal->fw_ready = false;
rtlpriv->rtlhal.being_init_adapter = true;
@@ -1443,7 +1438,6 @@ int rtl8723be_hw_init(struct ieee80211_hw *hw)
rtl8723be_dm_init(hw);
exit:
- local_irq_restore(flags);
rtlpriv->rtlhal.being_init_adapter = false;
return err;
}
--
2.54.0
next reply other threads:[~2026-06-08 13:54 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-08 13:53 William Hansen-Baird [this message]
2026-06-09 3:11 ` Ping-Ke Shih
2026-06-09 9:21 ` William Hansen-Baird
2026-06-09 9:53 ` [PATCH rtw-next v2] " William Hansen-Baird
2026-07-03 2:22 ` Ping-Ke Shih
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260608135345.2526325-3-williamhb+k@fastmail.com \
--to=william.hansen.baird@gmail.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-wireless@vger.kernel.org \
--cc=pkshih@realtek.com \
--cc=williamhb+k@fastmail.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®