mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Ramshouriesh <rshouriesh@gmail.com>
To: Bjorn Andersson <andersson@kernel.org>,
	 Konrad Dybcio <konradybcio@kernel.org>,
	Rob Herring <robh@kernel.org>,
	 Krzysztof Kozlowski <krzk+dt@kernel.org>,
	 Conor Dooley <conor+dt@kernel.org>,
	 Mauro Carvalho Chehab <mchehab@kernel.org>,
	 Bryan O'Donoghue <bryan.odonoghue@linaro.org>,
	 Vladimir Zapolskiy <vladimir.zapolskiy@linaro.org>,
	 Loic Poulain <loic.poulain@oss.qualcomm.com>,
	 Bryan O'Donoghue <bod@kernel.org>, Vinod Koul <vkoul@kernel.org>,
	 Neil Armstrong <neil.armstrong@linaro.org>
Cc: Aleksandrs Vinarskis <alex@vinarskis.com>,
	 linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
	 linux-kernel@vger.kernel.org, linux-media@vger.kernel.org,
	 linux-phy@lists.infradead.org,
	Ramshouriesh <rshouriesh@gmail.com>
Subject: [PATCH 2/9] media: dt-bindings: Add Himax HM1092 NIR sensor
Date: Wed, 10 Jun 2026 16:39:27 +0530	[thread overview]
Message-ID: <20260610-a14-himax-hm1092-v1-2-0c9907da47ed@gmail.com> (raw)
In-Reply-To: <20260610-a14-himax-hm1092-v1-0-0c9907da47ed@gmail.com>

Add a dt-binding schema for the Himax HM1092 1MP monochrome
near-infrared CMOS sensor, used as the face-authentication IR camera on
Snapdragon X laptops such as the ASUS Zenbook A14. The sensor streams
10-bit RAW over 1 or 2 MIPI CSI-2 data lanes.

The optional generic "leds" property (video-interface-devices.yaml)
associates an IR illuminator flash LED with the sensor, which the
driver strobes while streaming.

Signed-off-by: Ramshouriesh <rshouriesh@gmail.com>
---
 .../bindings/media/i2c/himax,hm1092.yaml           | 118 +++++++++++++++++++++
 1 file changed, 118 insertions(+)

diff --git a/Documentation/devicetree/bindings/media/i2c/himax,hm1092.yaml b/Documentation/devicetree/bindings/media/i2c/himax,hm1092.yaml
new file mode 100644
index 000000000000..085001493a20
--- /dev/null
+++ b/Documentation/devicetree/bindings/media/i2c/himax,hm1092.yaml
@@ -0,0 +1,118 @@
+# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/media/i2c/himax,hm1092.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Himax HM1092 Monochrome NIR Sensor
+
+maintainers:
+  - Ramshouriesh <rshouriesh@gmail.com>
+
+description:
+  The Himax HM1092 is a 1 megapixel monochrome near-infrared CMOS image
+  sensor with a MIPI CSI-2 interface, commonly used as the IR camera for
+  face authentication on laptops. It supports 10 bit RAW output at
+  1288x728 over 1 or 2 CSI-2 data lanes. An optional infrared
+  illuminator LED may be associated with the sensor through the generic
+  "leds" property; the driver strobes it while the sensor is streaming
+  so the scene stays lit for IR capture.
+
+allOf:
+  - $ref: /schemas/media/video-interface-devices.yaml#
+
+properties:
+  compatible:
+    const: himax,hm1092
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    maxItems: 1
+
+  avdd-supply:
+    description: Analogue circuit voltage supply.
+
+  dovdd-supply:
+    description: I/O circuit voltage supply.
+
+  dvdd-supply:
+    description: Digital circuit voltage supply.
+
+  reset-gpios:
+    maxItems: 1
+    description: Active low GPIO connected to the XSHUTDOWN pad.
+
+  leds:
+    description:
+      Optional phandle to an infrared illuminator flash LED strobed by
+      the driver while streaming.
+
+  port:
+    $ref: /schemas/graph.yaml#/$defs/port-base
+    additionalProperties: false
+
+    properties:
+      endpoint:
+        $ref: /schemas/media/video-interfaces.yaml#
+        additionalProperties: false
+
+        properties:
+          data-lanes:
+            minItems: 1
+            maxItems: 2
+          link-frequencies: true
+          remote-endpoint: true
+
+        required:
+          - data-lanes
+          - link-frequencies
+          - remote-endpoint
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - port
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        camera@24 {
+            compatible = "himax,hm1092";
+            reg = <0x24>;
+
+            reset-gpios = <&tlmm 109 GPIO_ACTIVE_LOW>;
+            pinctrl-names = "default";
+            pinctrl-0 = <&cam_ir_default>;
+
+            clocks = <&camcc 1>;
+            assigned-clocks = <&camcc 1>;
+            assigned-clock-rates = <24000000>;
+
+            orientation = <0>;
+
+            leds = <&ir_flash>;
+
+            avdd-supply = <&vreg_l7m_2p9>;
+            dvdd-supply = <&vreg_l7m_2p9>;
+            dovdd-supply = <&vreg_l4m_1p8>;
+
+            port {
+                hm1092_ep: endpoint {
+                    data-lanes = <1>;
+                    link-frequencies = /bits/ 64 <400000000>;
+                    remote-endpoint = <&camss_csiphy0_inep>;
+                };
+            };
+        };
+    };
+...

-- 
2.53.0


  parent reply	other threads:[~2026-06-10 11:10 UTC|newest]

Thread overview: 21+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-10 11:09 [PATCH 0/9] media/arm64: HM1092 IR camera and ASUS Zenbook A14 (X1P42100) camera support Ramshouriesh
2026-06-10 11:09 ` [PATCH 1/9] arm64: dts: qcom: x1-asus-zenbook-a14: Add on OV02C10 RGB sensor on CSIPHY4 Ramshouriesh
2026-06-10 11:09 ` Ramshouriesh [this message]
2026-06-10 12:21   ` [PATCH 2/9] media: dt-bindings: Add Himax HM1092 NIR sensor Bryan O'Donoghue
2026-06-11  9:11   ` Krzysztof Kozlowski
2026-06-10 11:09 ` [PATCH 3/9] media: i2c: hm1092: add Himax HM1092 mono NIR sensor driver Ramshouriesh
2026-06-10 12:11   ` Bryan O'Donoghue
2026-06-11  9:13   ` Krzysztof Kozlowski
2026-06-10 11:09 ` [PATCH 4/9] MAINTAINERS: add entry for the Himax HM1092 " Ramshouriesh
2026-06-10 12:24   ` Bryan O'Donoghue
2026-06-10 11:09 ` [PATCH 5/9] arm64: dts: qcom: x1-asus-zenbook-a14: add HM1092 IR camera and wire cameras to camss Ramshouriesh
2026-06-10 11:09 ` [PATCH 6/9] arm64: dts/media: qcom: keep PLL8 out of Purwa camss hot path Ramshouriesh
2026-06-10 12:13   ` Krzysztof Kozlowski
2026-06-11  8:04   ` Konrad Dybcio
2026-06-10 11:09 ` [PATCH 7/9] arm64: dts: qcom: hamoa: reorder csiphy power-domains for v8 CSI2-PHY Ramshouriesh
2026-06-10 12:24   ` Bryan O'Donoghue
2026-06-10 11:09 ` [PATCH 8/9] dt-bindings: phy: qcom: add MIPI CSI2 mode constants Ramshouriesh
2026-06-11  9:15   ` Krzysztof Kozlowski
2026-06-10 11:09 ` [PATCH 9/9] phy: qcom-mipi-csi2: accept PHY_QCOM_CSI2_MODE_DPHY phy-cell Ramshouriesh
2026-06-11 10:01 ` [PATCH 0/9] media/arm64: HM1092 IR camera and ASUS Zenbook A14 (X1P42100) camera support Vladimir Zapolskiy
2026-06-11 10:55   ` Ramshouriesh R

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260610-a14-himax-hm1092-v1-2-0c9907da47ed@gmail.com \
    --to=rshouriesh@gmail.com \
    --cc=alex@vinarskis.com \
    --cc=andersson@kernel.org \
    --cc=bod@kernel.org \
    --cc=bryan.odonoghue@linaro.org \
    --cc=conor+dt@kernel.org \
    --cc=devicetree@vger.kernel.org \
    --cc=konradybcio@kernel.org \
    --cc=krzk+dt@kernel.org \
    --cc=linux-arm-msm@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-media@vger.kernel.org \
    --cc=linux-phy@lists.infradead.org \
    --cc=loic.poulain@oss.qualcomm.com \
    --cc=mchehab@kernel.org \
    --cc=neil.armstrong@linaro.org \
    --cc=robh@kernel.org \
    --cc=vkoul@kernel.org \
    --cc=vladimir.zapolskiy@linaro.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®