[PATCH v2 2/3] hwmon: ina2xx: support ina232

[Loic Poulain <loic.poulain@oss.qualcomm.com>]

From: Martino Facchin <m.facchin@arduino.cc>

The INA232 is a current/power monitor. It shares the same register
layout as the INA2xx and uses the INA226 default configuration, but
differs in its electrical characteristics:

Signed-off-by: Martino Facchin <m.facchin@arduino.cc>
Signed-off-by: Loic Poulain <loic.poulain@oss.qualcomm.com>
---
 drivers/hwmon/ina2xx.c | 20 ++++++++++++++++++++
 1 file changed, 20 insertions(+)

diff --git a/drivers/hwmon/ina2xx.c b/drivers/hwmon/ina2xx.c
index 613ffb622b7c42b8b6090d3b4ec7b2fa412e24a4..fc2319ad99fc398a50e97ee617f67255bd0b3038 100644
--- a/drivers/hwmon/ina2xx.c
+++ b/drivers/hwmon/ina2xx.c
@@ -122,6 +122,7 @@ static const struct regmap_config ina2xx_regmap_config = {
 enum ina2xx_ids {
 	ina219,
 	ina226,
+	ina232,
 	ina234,
 	ina260,
 	sy24655
@@ -196,6 +197,20 @@ static const struct ina2xx_config ina2xx_config[] = {
 		.current_shift = 4,
 		.has_update_interval = true,
 	},
+	[ina232] = {
+		.config_default = INA226_CONFIG_DEFAULT,
+		.calibration_value = 2048,
+		.shunt_div = 400,
+		.shunt_voltage_shift = 0,
+		.bus_voltage_shift = 0,
+		.bus_voltage_lsb = 1600,
+		.power_lsb_factor = 32,
+		.has_alerts = true,
+		.has_ishunt = false,
+		.has_power_average = false,
+		.current_shift = 0,
+		.has_update_interval = true,
+	},
 	[ina260] = {
 		.config_default = INA260_CONFIG_DEFAULT,
 		.shunt_div = 400,
@@ -1005,6 +1020,7 @@ static const struct i2c_device_id ina2xx_id[] = {
 	{ "ina226", ina226 },
 	{ "ina230", ina226 },
 	{ "ina231", ina226 },
+	{ "ina232", ina232 },
 	{ "ina234", ina234 },
 	{ "ina260", ina260 },
 	{ "sy24655", sy24655 },
@@ -1037,6 +1053,10 @@ static const struct of_device_id __maybe_unused ina2xx_of_match[] = {
 		.compatible = "ti,ina231",
 		.data = (void *)ina226
 	},
+	{
+		.compatible = "ti,ina232",
+		.data = (void *)ina232
+	},
 	{
 		.compatible = "ti,ina234",
 		.data = (void *)ina234

-- 
2.34.1