mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Xin Zhao <jackzxcui1989@163.com>
To: vschneid@redhat.com, mingo@redhat.com, peterz@infradead.org,
	juri.lelli@redhat.com, vincent.guittot@linaro.org,
	dietmar.eggemann@arm.com, rostedt@goodmis.org,
	bsegall@google.com, mgorman@suse.de, kprateek.nayak@amd.com,
	aiqun.yu@oss.qualcomm.com
Cc: linux-kernel@vger.kernel.org, Xin Zhao <jackzxcui1989@163.com>
Subject: [PATCH v3 1/2] sched/fair: Don't trigger active lb if src_rq->curr is CFS and not on_rq
Date: Mon, 15 Jun 2026 13:38:08 +0800	[thread overview]
Message-ID: <20260615053809.3587677-2-jackzxcui1989@163.com> (raw)
In-Reply-To: <20260615053809.3587677-1-jackzxcui1989@163.com>

Active balancing needs the help by migration threads which will interrupt
task on src_rq. It has a certain impact on overall performance. Active
balancing often fails, there is a check to determine whether the current
task(say it 'curr') on src_rq can run on dst_rq. We have observed that
even that, if curr is a CFS task and on_rq is 0, the failure rate of
active balancing is very high. Below are the test data from a certain
fillback task scenario executed on a platform with 18 CPUs over 300
seconds:

total: the total count of cases that match
cpumask_test_cpu(this_cpu, busiest->curr->cpus_ptr) &&
busiest->curr->sched_class == &fair_sched_class &&
!busiest->curr->on_rq
succ/fail: the active balance success/fail cases that match
cpumask_......->on_rq

                      total    succ    fail
cpu0  domain0 00003       0       0       0
cpu0  domain1 3ffff      32       0      32
cpu1  domain0 00003       0       0       0
cpu1  domain1 3ffff      40       0      40
cpu2  domain0 0003c       3       0       3
cpu2  domain1 3ffff       6       0       6
cpu3  domain0 0003c       3       1       2
cpu3  domain1 3ffff       3       0       3
cpu4  domain0 0003c       3       0       3
cpu4  domain1 3ffff       4       0       4
cpu5  domain0 0003c       1       0       1
cpu5  domain1 3ffff       6       0       6
cpu6  domain0 003c0      39       0      39
cpu6  domain1 3ffff      36       0      36
cpu7  domain0 003c0     213       4     209
cpu7  domain1 3ffff      24       2      22
cpu8  domain0 003c0     242      16     226
cpu8  domain1 3ffff      16       0      16
cpu9  domain0 003c0       0       0       0
cpu9  domain1 3ffff       6       1       5
cpu10 domain0 03c00      58       1      57
cpu10 domain1 3ffff       0       0       0
cpu11 domain0 03c00      54       4      50
cpu11 domain1 3ffff       1       0       1
cpu12 domain0 03c00      66       1      65
cpu12 domain1 3ffff       0       0       0
cpu13 domain0 03c00      66       1      65
cpu13 domain1 3ffff       0       0       0
cpu14 domain0 3c000       0       0       0
cpu14 domain1 3ffff      57       5      52
cpu15 domain0 3c000      15       0      15
cpu15 domain1 3ffff      35       0      35
cpu16 domain0 3c000     148       3     145
cpu16 domain1 3ffff     109       1     108
cpu17 domain0 3c000     182       2     180
cpu17 domain1 3ffff      78       1      77

In __schedule(), before setting curr to next, during the execution of
pick_next_task(), sched_balance_rq() is called. It will unlock and then
re-lock the rq, creating "holes" during which other CPUs may see zero
rq->curr->on_rq. try_to_block_task() sets curr->on_rq to 0, and during the
rq lock "hole" in pick_next_task(), rq->curr has not yet been assigned to
next, resulting in curr->on_rq being seen as 0.

We do not need to perform active balancing when src_rq->curr is CFS task
but on_rq is 0, as other CFS tasks have been already checked just before.
For cases where src_rq->curr is a non-CFS task, we retain the affinity
check for dst_rq to trigger active balancing because such task is likely
to wake-up or woken-by src_rq CFS task which has similar affinity
characteristics to migrate.

Two reasons why not check sched_class and on_rq of busiest->curr with the
cpumask_test_cpu() check:
1. Let the PATCH not introduce new cases that skip logic for resetting
balance_interval to min_interval.
2. The check of whether busiest cpu has been just triggered active balance
filters a bit more cases than the check of sched_class and on_rq.

Signed-off-by: Xin Zhao <jackzxcui1989@163.com>
---

Change in v3:
- Consider the cost by sched_class and on_rq check,
  as suggested by Aiqun(Maira) Yu.
  Move the check after the check of whether busiest cpu has been just
  triggered active balance.

Change in v2:
- Add reason in the commit log why we can see zero rq->curr->on_rq when we
  hold rq lock,
  as suggested by Valentin Schneider.
- Link to v2: https://lore.kernel.org/all/20260613073228.1951105-1-jackzxcui1989@163.com/

v1:
- Link to v1: https://lore.kernel.org/all/20260603125938.1938115-1-jackzxcui1989@163.com/
---
 kernel/sched/fair.c | 4 +++-
 1 file changed, 3 insertions(+), 1 deletion(-)

diff --git a/kernel/sched/fair.c b/kernel/sched/fair.c
index b5819c489..1c5043629 100644
--- a/kernel/sched/fair.c
+++ b/kernel/sched/fair.c
@@ -13436,7 +13436,9 @@ static int sched_balance_rq(int this_cpu, struct rq *this_rq,
 			 * ->active_balance_work.  Once set, it's cleared
 			 * only after active load balance is finished.
 			 */
-			if (!busiest->active_balance) {
+			if (!busiest->active_balance &&
+			    !(busiest->curr->sched_class == &fair_sched_class &&
+			      !busiest->curr->on_rq)) {
 				busiest->active_balance = 1;
 				busiest->push_cpu = this_cpu;
 				active_balance = 1;
-- 
2.34.1


  reply	other threads:[~2026-06-15  5:39 UTC|newest]

Thread overview: 8+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-06-15  5:38 [PATCH v3 0/2] sched/fair: Optimize some active balance logic Xin Zhao
2026-06-15  5:38 ` Xin Zhao [this message]
2026-06-15 13:39   ` [PATCH v3 1/2] sched/fair: Don't trigger active lb if src_rq->curr is CFS and not on_rq Valentin Schneider
2026-06-15 13:57     ` Phil Auld
2026-06-15 14:09     ` Xin Zhao
2026-06-16  3:06       ` Aiqun(Maria) Yu
2026-06-16  4:07         ` Xin Zhao
2026-06-15  5:38 ` [PATCH v3 2/2] sched/fair: Simplify balance_interval reset logic in sched_balance_rq() Xin Zhao

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260615053809.3587677-2-jackzxcui1989@163.com \
    --to=jackzxcui1989@163.com \
    --cc=aiqun.yu@oss.qualcomm.com \
    --cc=bsegall@google.com \
    --cc=dietmar.eggemann@arm.com \
    --cc=juri.lelli@redhat.com \
    --cc=kprateek.nayak@amd.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=mgorman@suse.de \
    --cc=mingo@redhat.com \
    --cc=peterz@infradead.org \
    --cc=rostedt@goodmis.org \
    --cc=vincent.guittot@linaro.org \
    --cc=vschneid@redhat.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®