[PATCH v5 7/8] arm64: dts: imx8: add camera parallel interface (CPI) node

[Frank.Li@oss.nxp.com]

From: Frank Li <Frank.Li@nxp.com>

Add camera parallel interface (CPI) node.

Signed-off-by: Frank Li <Frank.Li@nxp.com>
---
changes in v4
- none

changes in v3
- replace csi with cpi.

changes in v2
- update compatible string to match binding's change
---
 arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi    | 13 +++++++++++
 arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi | 27 +++++++++++++++++++++++
 2 files changed, 40 insertions(+)

diff --git a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
index a72b2f1c4a1b2..b504f99f6acdb 100644
--- a/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8-ss-img.dtsi
@@ -222,6 +222,19 @@ irqsteer_parallel: irqsteer@58260000 {
 		status = "disabled";
 	};
 
+	parallel_cpi: cpi@58261000 {
+		compatible = "fsl,imx8qxp-pcif";
+		reg = <0x58261000 0x1000>;
+		clocks = <&pi0_pxl_lpcg IMX_LPCG_CLK_0>,
+			 <&pi0_ipg_lpcg IMX_LPCG_CLK_4>;
+		clock-names = "pixel", "ipg";
+		assigned-clocks = <&clk IMX_SC_R_PI_0 IMX_SC_PM_CLK_PER>;
+		assigned-clock-parents = <&clk IMX_SC_R_PI_0_PLL IMX_SC_PM_CLK_PLL>;
+		assigned-clock-rates = <160000000>;
+		power-domains = <&pd IMX_SC_R_PI_0>;
+		status = "disabled";
+	};
+
 	pi0_ipg_lpcg: clock-controller@58263004 {
 		compatible = "fsl,imx8qxp-lpcg";
 		reg = <0x58263004 0x4>;
diff --git a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
index 232cf25dadfcd..5aae15540d6cb 100644
--- a/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
+++ b/arch/arm64/boot/dts/freescale/imx8qxp-ss-img.dtsi
@@ -62,6 +62,14 @@ isi_in_2: endpoint {
 				remote-endpoint = <&mipi_csi0_out>;
 			};
 		};
+
+		port@4 {
+			reg = <4>;
+
+			isi_in_4: endpoint {
+				remote-endpoint = <&parallel_cpi_out>;
+			};
+		};
 	};
 };
 
@@ -95,3 +103,22 @@ &jpegenc {
 &mipi_csi_1 {
 	status = "disabled";
 };
+
+&parallel_cpi {
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@0 {
+			reg = <0>;
+		};
+
+		port@1 {
+			reg = <1>;
+
+			parallel_cpi_out: endpoint {
+				remote-endpoint = <&isi_in_4>;
+			};
+		};
+	};
+};

-- 
2.43.0