[PATCH v3] EDAC/altera: use ECC manager compatible to select A10/S10 IRQ layout

[Rounak Das <rounakdas2025@gmail.com>]

The SDMMC ECC IRQ layout selection uses CONFIG_64BIT to distinguish
between Arria10 and Stratix10 paths. This is architecture-based,
while the interrupt layout is a hardware property described by DT
compatible strings.

Detect the SoC once at probe via the altr,socfpga-s10-ecc-manager
compatible on the ECC manager node, store it under the struct
altr_arria10_edac, and use it in altr_portb_setup() and
altr_edac_a10_device_add() in place of CONFIG_64BIT.

Selecting on the manager compatible keeps the decision SoC-wide and
correct for every ECC child device (OCRAM, USB, EMAC, SD/MMC),
and avoids repeated compatible lookups. Stratix10 and
Agilex both declare altr,socfpga-s10-ecc-manager and Arria10 does not,
so behaviour is unchanged on all three SoCs.

Signed-off-by: Rounak Das <rounakdas2025@gmail.com>
---
v3:
 - Use compatible string altr,socfpga-s10-ecc-manager instead of
   sdmmc-ecc (Dinh).
 - Set it once into struct altr_arria10_edac::is_s10 to
   avoid repeated of_device_is_compatible() calls (Dinh).
 - Fix the checkpatch open-parenthesis alignment.

v2: https://lore.kernel.org/linux-edac/20260616081709.48774-1-rounakdas2025@gmail.com/
 - Use legal name in Signed-off-by (Borislav).

 drivers/edac/altera_edac.c | 106 +++++++++++++++++++------------------
 drivers/edac/altera_edac.h |   1 +
 2 files changed, 55 insertions(+), 52 deletions(-)

diff --git a/drivers/edac/altera_edac.c b/drivers/edac/altera_edac.c
index 4edd2088c2db6..c728cd474abdf 100644
--- a/drivers/edac/altera_edac.c
+++ b/drivers/edac/altera_edac.c
@@ -1507,6 +1507,7 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 	int edac_idx, rc;
 	struct device_node *np;
 	const struct edac_device_prv_data *prv = &a10_sdmmceccb_data;
+	bool is_s10 = device->edac->is_s10;
 
 	rc = altr_check_ecc_deps(device);
 	if (rc)
@@ -1548,15 +1549,14 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 
 	/*
 	 * Update the PortB IRQs - A10 has 4, S10 has 2, Index accordingly
-	 *
-	 * FIXME: Instead of ifdefs with different architectures the driver
-	 *        should properly use compatibles.
 	 */
-#ifdef CONFIG_64BIT
-	altdev->sb_irq = irq_of_parse_and_map(np, 1);
-#else
-	altdev->sb_irq = irq_of_parse_and_map(np, 2);
-#endif
+
+	/* Using compatibles to determine the IRQ Index */
+	if (is_s10)
+		altdev->sb_irq = irq_of_parse_and_map(np, 1);
+	else
+		altdev->sb_irq = irq_of_parse_and_map(np, 2);
+
 	if (!altdev->sb_irq) {
 		edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB SBIRQ alloc\n");
 		rc = -ENODEV;
@@ -1570,29 +1570,28 @@ static int altr_portb_setup(struct altr_edac_device_dev *device)
 		goto err_release_group_1;
 	}
 
-#ifdef CONFIG_64BIT
-	/* Use IRQ to determine SError origin instead of assigning IRQ */
-	rc = of_property_read_u32_index(np, "interrupts", 1, &altdev->db_irq);
-	if (rc) {
-		edac_printk(KERN_ERR, EDAC_DEVICE,
-			    "Error PortB DBIRQ alloc\n");
-		goto err_release_group_1;
-	}
-#else
-	altdev->db_irq = irq_of_parse_and_map(np, 3);
-	if (!altdev->db_irq) {
-		edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB DBIRQ alloc\n");
-		rc = -ENODEV;
-		goto err_release_group_1;
-	}
-	rc = devm_request_irq(&altdev->ddev, altdev->db_irq,
-			      prv->ecc_irq_handler, IRQF_TRIGGER_HIGH,
-			      ecc_name, altdev);
-	if (rc) {
-		edac_printk(KERN_ERR, EDAC_DEVICE, "PortB DBERR IRQ error\n");
-		goto err_release_group_1;
+	if (is_s10) {
+		/* Use IRQ to determine SError origin instead of assigning IRQ */
+		rc = of_property_read_u32_index(np, "interrupts", 1, &altdev->db_irq);
+		if (rc) {
+			edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB DBIRQ alloc\n");
+			goto err_release_group_1;
+		}
+	} else {
+		altdev->db_irq = irq_of_parse_and_map(np, 3);
+		if (!altdev->db_irq) {
+			edac_printk(KERN_ERR, EDAC_DEVICE, "Error PortB DBIRQ alloc\n");
+			rc = -ENODEV;
+			goto err_release_group_1;
+		}
+		rc = devm_request_irq(&altdev->ddev, altdev->db_irq,
+				      prv->ecc_irq_handler, IRQF_TRIGGER_HIGH,
+				      ecc_name, altdev);
+		if (rc) {
+			edac_printk(KERN_ERR, EDAC_DEVICE, "PortB DBERR IRQ error\n");
+			goto err_release_group_1;
+		}
 	}
-#endif
 
 	rc = edac_device_add_device(dci);
 	if (rc) {
@@ -1974,29 +1973,29 @@ static int altr_edac_a10_device_add(struct altr_arria10_edac *edac,
 		goto err_release_group1;
 	}
 
-#ifdef CONFIG_64BIT
-	/* Use IRQ to determine SError origin instead of assigning IRQ */
-	rc = of_property_read_u32_index(np, "interrupts", 0, &altdev->db_irq);
-	if (rc) {
-		edac_printk(KERN_ERR, EDAC_DEVICE,
-			    "Unable to parse DB IRQ index\n");
-		goto err_release_group1;
-	}
-#else
-	altdev->db_irq = irq_of_parse_and_map(np, 1);
-	if (!altdev->db_irq) {
-		edac_printk(KERN_ERR, EDAC_DEVICE, "Error allocating DBIRQ\n");
-		rc = -ENODEV;
-		goto err_release_group1;
-	}
-	rc = devm_request_irq(edac->dev, altdev->db_irq, prv->ecc_irq_handler,
-			      IRQF_TRIGGER_HIGH,
-			      ecc_name, altdev);
-	if (rc) {
-		edac_printk(KERN_ERR, EDAC_DEVICE, "No DBERR IRQ resource\n");
-		goto err_release_group1;
+	if (edac->is_s10) {
+		/* Use IRQ to determine SError origin instead of assigning IRQ */
+		rc = of_property_read_u32_index(np, "interrupts", 0, &altdev->db_irq);
+		if (rc) {
+			edac_printk(KERN_ERR, EDAC_DEVICE,
+				    "Unable to parse DB IRQ index\n");
+			goto err_release_group1;
+		}
+	} else {
+		altdev->db_irq = irq_of_parse_and_map(np, 1);
+		if (!altdev->db_irq) {
+			edac_printk(KERN_ERR, EDAC_DEVICE, "Error allocating DBIRQ\n");
+			rc = -ENODEV;
+			goto err_release_group1;
+		}
+		rc = devm_request_irq(edac->dev, altdev->db_irq, prv->ecc_irq_handler,
+				      IRQF_TRIGGER_HIGH,
+				      ecc_name, altdev);
+		if (rc) {
+			edac_printk(KERN_ERR, EDAC_DEVICE, "No DBERR IRQ resource\n");
+			goto err_release_group1;
+		}
 	}
-#endif
 
 	rc = edac_device_add_device(dci);
 	if (rc) {
@@ -2122,6 +2121,9 @@ static int altr_edac_a10_probe(struct platform_device *pdev)
 	platform_set_drvdata(pdev, edac);
 	INIT_LIST_HEAD(&edac->a10_ecc_devices);
 
+	edac->is_s10 = of_device_is_compatible(pdev->dev.of_node,
+					       "altr,socfpga-s10-ecc-manager");
+
 	edac->ecc_mgr_map =
 		altr_sysmgr_regmap_lookup_by_phandle(pdev->dev.of_node,
 						     "altr,sysmgr-syscon");
diff --git a/drivers/edac/altera_edac.h b/drivers/edac/altera_edac.h
index f3e84172caa9c..9387056fd65e3 100644
--- a/drivers/edac/altera_edac.h
+++ b/drivers/edac/altera_edac.h
@@ -394,6 +394,7 @@ struct altr_arria10_edac {
 	struct irq_chip		irq_chip;
 	struct list_head	a10_ecc_devices;
 	struct notifier_block	panic_notifier;
+	bool is_s10;
 };
 
 #endif	/* #ifndef _ALTERA_EDAC_H */
-- 
2.50.1 (Apple Git-155)