From: John Madieu <john.madieu.xa@bp.renesas.com>
To: geert+renesas@glider.be, magnus.damm@gmail.com, robh@kernel.org,
krzk+dt@kernel.org, conor+dt@kernel.org
Cc: linux-renesas-soc@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, john.madieu@gmail.com,
biju.das.jz@bp.renesas.com,
John Madieu <john.madieu.xa@bp.renesas.com>
Subject: [PATCH v6 0/4] arm64: dts: renesas: Add RZ/G3E audio enablement
Date: Fri, 19 Jun 2026 08:39:47 +0000 [thread overview]
Message-ID: <20260619083951.3777556-1-john.madieu.xa@bp.renesas.com> (raw)
This is the remainder of the RZ/G3E audio enablement series. In v4, Geert
queued the clock and clock-input groundwork for v7.3, so it is not resent
here:
- dt-bindings: clock: renesas: Add audio clock inputs for RZ/V2H family
-> renesas-clk
- clk: renesas: r9a09g047: Add audio clock and reset support
-> renesas-clk
- arm64: dts: renesas: rzv2h: Add audio clock inputs
-> renesas-devel
- arm64: dts: renesas: rzg3e-smarc-som: Add I2C1 support
-> renesas-devel
This series carries only the four patches that were reviewed but not
queued. The sound node in 1/4 references the audio module clocks and
resets added by the queued clk patches, so this series depends on the
renesas-clk queue and is based on renesas-devel for v7.3.
v6 is a single fix: the Versa3 patch (2/4) now actually drops the
unconnected DIFF2 output from assigned-clocks/assigned-clock-rates, which
in v5 was described in the commit message but left in the DTS. The other
three patches are unchanged from v5.
v5:
- Resend only the four patches not queued for v7.3 (the four above are
dropped from the series).
- Sound node: hexadecimal module clock/reset numbers, lowercase 0x1f000
SSI size, SCU reg extended to 0x20000 to cover the SCU DMAC, per-line
clock/reset comments dropped.
- Versa3: document DIFF1/Ethernet, intended to drop the unconnected
DIFF2 output (the description was updated but the DTS still listed
output 5; fixed in v6).
- Pinmux: hyphenate node names, sort entries by GPIO number.
- Codec: drop the unnecessary #address-cells/#size-cells on codec@1a
(sashiko-bot); add Geert's Reviewed-by.
v4:
- Link to v4 at [1]
- Sound node: dotted clock/reset names moved to hyphenated form, legacy
rcar_sound,* sub-nodes renamed to unprefixed ctu/dvc/mix/src/ssi/ssiu,
clocks/resets reordered ascending, explanatory comment blocks dropped,
dmas continuation lines aligned, commit message corrected (snd_rzg3e).
- Versa3, pinmux, codec: no changes.
v3:
- Sound node: commit description typo fix.
- Versa3, pinmux, codec: no changes.
v2:
- Sound node: drop the 2-cells specifier on the audio DMA assignment and
stop updating DMAC #dma-cells.
- Versa3, pinmux, codec: no changes.
[1] https://lore.kernel.org/r/20260525110603.4018170-1-john.madieu.xa@bp.renesas.com
John Madieu (4):
arm64: dts: renesas: r9a09g047: Add RZ/G3E Sound support
arm64: dts: renesas: rzg3e-smarc-som: Add Versa3 clock generator
arm64: dts: renesas: rzg3e-smarc-som: add audio pinmux definitions
arm64: dts: renesas: r9a09g047e57-smarc: add DA7212 audio codec
support
arch/arm64/boot/dts/renesas/r9a09g047.dtsi | 462 ++++++++++++++++++
.../boot/dts/renesas/r9a09g047e57-smarc.dts | 112 +++++
.../boot/dts/renesas/rzg3e-smarc-som.dtsi | 32 ++
3 files changed, 606 insertions(+)
--
2.25.1
next reply other threads:[~2026-06-19 8:40 UTC|newest]
Thread overview: 12+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-19 8:39 John Madieu [this message]
2026-06-19 8:39 ` [PATCH v6 1/4] arm64: dts: renesas: r9a09g047: Add RZ/G3E Sound support John Madieu
2026-06-22 10:19 ` Geert Uytterhoeven
2026-06-22 13:29 ` Geert Uytterhoeven
2026-06-22 10:29 ` Geert Uytterhoeven
2026-06-19 8:39 ` [PATCH v6 2/4] arm64: dts: renesas: rzg3e-smarc-som: Add Versa3 clock generator John Madieu
2026-06-22 13:30 ` Geert Uytterhoeven
2026-06-19 8:39 ` [PATCH v6 3/4] arm64: dts: renesas: rzg3e-smarc-som: add audio pinmux definitions John Madieu
2026-06-22 13:30 ` Geert Uytterhoeven
2026-06-19 8:39 ` [PATCH v6 4/4] arm64: dts: renesas: r9a09g047e57-smarc: add DA7212 audio codec support John Madieu
2026-06-22 13:30 ` Geert Uytterhoeven
2026-08-05 13:20 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260619083951.3777556-1-john.madieu.xa@bp.renesas.com \
--to=john.madieu.xa@bp.renesas.com \
--cc=biju.das.jz@bp.renesas.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=geert+renesas@glider.be \
--cc=john.madieu@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-renesas-soc@vger.kernel.org \
--cc=magnus.damm@gmail.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®