From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from www537.your-server.de (www537.your-server.de [188.40.3.216]) (using TLSv1.2 with cipher ECDHE-RSA-AES256-GCM-SHA384 (256/256 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 2538937B014; Fri, 19 Jun 2026 11:32:33 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=188.40.3.216 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1781868760; cv=none; b=YdH2D/ZLuLsUU9GtHzgyu1PhoHZZLmGiOOSR1L6y4RPnOxQcTLShVLaq/hDOS/fc5mYWimYjTpaclR/Uj3TvLB0XosX3yxcsPqEFlaY+H131X6rgW71t6YcttyuZVHtqJUYVhcSSi2Ux124N+67raGK/NdRBtbSvp3uIIgDPI1c= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1781868760; c=relaxed/simple; bh=YhVGXaNkBqwlPLXkVLAtVcMyZ/KqVmxC8mvWqY21XbI=; h=From:To:Cc:Subject:Date:Message-ID:MIME-Version:Content-Type; b=HfR1toV16xudzKBgAIAxlrRSjQlKzb8XYJEUq+8FAC1YiAgcAze7zB7dff1l2TQoleTSDoacZKOAT/mxnB/c/TuggrB4/wkZQTTe1L3ap5LNWAMprs4EaZ8oFbFplg42lmwdb96D7ZF2WDZOU4Zq3Wu1fE4hN+LjcgJSvz3NxWg= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=ew.tq-group.com; spf=pass smtp.mailfrom=ew.tq-group.com; dkim=pass (2048-bit key) header.d=ew.tq-group.com header.i=@ew.tq-group.com header.b=PLp1wRid; arc=none smtp.client-ip=188.40.3.216 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=quarantine dis=none) header.from=ew.tq-group.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=ew.tq-group.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=ew.tq-group.com header.i=@ew.tq-group.com header.b="PLp1wRid" DKIM-Signature: v=1; a=rsa-sha256; q=dns/txt; c=relaxed/relaxed; d=ew.tq-group.com; s=default2602; h=Content-Transfer-Encoding:Content-Type: MIME-Version:Message-ID:Date:Subject:Cc:To:From:Sender:Reply-To:Content-ID: Content-Description:Resent-Date:Resent-From:Resent-Sender:Resent-To:Resent-Cc :Resent-Message-ID:In-Reply-To:References; bh=28JLk2rcNVLWYHQHJrp/8GtPPhsOixazg1xldZ2eync=; b=PLp1wRidiJHl3vhtylMB3hs9uV dH6MvM6xOHoX8KpVJVrn4CIVxruVISAArt+2Tw6HfF+urN1T6rO84hUSrVlC/nDa1yf+D7YswqgMH MRcHWTrYXI306VazgMPo3t5BTlghPPIrNlYOd6euV4/Xrny8F/f0qSwZKl5j665qWeI8fhhdF/Bku d2PK9N7YWiFE+PfInxi9mSCfeCHwRQ7yDtPxSfNV8/71XOnbFVT1n2Wsrdu8rdmF+ANGy7imixSho Ukok/akoYzFjNhFciJhkjZUAAE4cl0F4exA2Q7dkQ2Bd1/VV6LIRbngfK/VwfY/yq40GBFEzrFMSc s66jGmKw==; Received: from sslproxy06.your-server.de ([78.46.172.3]) by www537.your-server.de with esmtpsa (TLS1.3) tls TLS_AES_256_GCM_SHA384 (Exim 4.96.2) (envelope-from ) id 1waXL3-000Olr-1f; Fri, 19 Jun 2026 13:24:45 +0200 Received: from localhost ([127.0.0.1]) by sslproxy06.your-server.de with esmtpsa (TLS1.3) tls TLS_AES_256_GCM_SHA384 (Exim 4.96) (envelope-from ) id 1waXL2-000KVq-10; Fri, 19 Jun 2026 13:24:44 +0200 From: Alexander Stein To: Frank Li , Sascha Hauer , Pengutronix Kernel Team , Fabio Estevam , Rob Herring , Krzysztof Kozlowski , Conor Dooley , Geert Uytterhoeven , Magnus Damm Cc: Markus Niebel , imx@lists.linux.dev, linux-arm-kernel@lists.infradead.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, linux@ew.tq-group.com, linux-renesas-soc@vger.kernel.org, Alexander Stein Subject: [PATCH v5 1/1] arm64: dts: add tqma9596la-mba95xxca Date: Fri, 19 Jun 2026 13:24:30 +0200 Message-ID: <20260619112434.1121610-1-alexander.stein@ew.tq-group.com> X-Mailer: git-send-email 2.54.0 Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Type: text/plain; charset=UTF-8 Content-Transfer-Encoding: 8bit X-Virus-Scanned: Clear (ClamAV 1.4.3/28036/Fri Jun 19 08:25:16 2026) From: Markus Niebel This adds support for TQMa95xxLA modules, designed to be soldered on a carrier board. MBa95xxCA is a carrier reference board / starter kit design. There is a common device tree for all variants with e.g. reduced CPU core / feature count. Enable the external accessible PCIe controllers as host, add clocking and reset GPIO. While at it, add hogs for GPIO lines from the M.2 slots until M.2 connector driver is available. Signed-off-by: Markus Niebel Signed-off-by: Alexander Stein --- Changes in v5: * Limit LPSPI4 max frequency * Replace PCIe M2 Key-E GPIO hogs with dedicated connector node * Fix PCIe clock configuration Changes in v4: * Fix LPSPI4 pad muxing and control Changes in v3: * Moved reserved-memory to board-lebel * Remove VPU reserved memory (unused for now) * Fix typo in connector comment Changes in v2: * removed useless regulator * added USB PD source configuration * Removed unused uart-has-rtscts properties (unused by LPUART) * Fixed RTS/CTS pullups in pinctrl * Added thermalzone on module arch/arm64/boot/dts/freescale/Makefile | 1 + .../freescale/imx95-tqma9596la-mba95xxca.dts | 963 ++++++++++++++++++ .../boot/dts/freescale/imx95-tqma9596la.dtsi | 278 +++++ 3 files changed, 1242 insertions(+) create mode 100644 arch/arm64/boot/dts/freescale/imx95-tqma9596la-mba95xxca.dts create mode 100644 arch/arm64/boot/dts/freescale/imx95-tqma9596la.dtsi diff --git a/arch/arm64/boot/dts/freescale/Makefile b/arch/arm64/boot/dts/freescale/Makefile index 8ddaab127ab9c..43e1dc51b11d7 100644 --- a/arch/arm64/boot/dts/freescale/Makefile +++ b/arch/arm64/boot/dts/freescale/Makefile @@ -649,6 +649,7 @@ dtb-$(CONFIG_ARCH_MXC) += imx95-19x19-frdm-pro.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-aquila-clover.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-aquila-dev.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-toradex-smarc-dev.dtb +dtb-$(CONFIG_ARCH_MXC) += imx95-tqma9596la-mba95xxca.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-tqma9596sa-mb-smarc-2.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-var-dart-sonata.dtb dtb-$(CONFIG_ARCH_MXC) += imx95-verdin-nonwifi-dahlia.dtb diff --git a/arch/arm64/boot/dts/freescale/imx95-tqma9596la-mba95xxca.dts b/arch/arm64/boot/dts/freescale/imx95-tqma9596la-mba95xxca.dts new file mode 100644 index 0000000000000..4b49f6cf731da --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-tqma9596la-mba95xxca.dts @@ -0,0 +1,963 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2024-2026 TQ-Systems GmbH , + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + * Author: Markus Niebel + */ + +/dts-v1/; + +#include +#include +#include +#include +#include "imx95-tqma9596la.dtsi" + +/ { + model = "TQ-Systems i.MX95 TQMa95xxLA on MBa95xxCA"; + compatible = "tq,imx95-tqma9596la-mba95xxca", "tq,imx95-tqma9596la", "fsl,imx95"; + chassis-type = "embedded"; + + aliases { + ethernet0 = &enetc_port0; + ethernet1 = &enetc_port1; + ethernet2 = &enetc_port2; + gpio0 = &gpio1; + gpio1 = &gpio2; + gpio2 = &gpio3; + gpio3 = &gpio4; + i2c0 = &lpi2c1; + i2c1 = &lpi2c2; + i2c2 = &lpi2c3; + i2c3 = &lpi2c4; + i2c4 = &lpi2c5; + i2c5 = &lpi2c6; + i2c6 = &lpi2c7; + i2c7 = &lpi2c8; + mmc0 = &usdhc1; + mmc1 = &usdhc2; + rtc0 = &pcf85063; + rtc1 = &scmi_bbm; + serial0 = &lpuart1; + serial1 = &lpuart2; + serial2 = &lpuart3; + serial3 = &lpuart4; + serial4 = &lpuart5; + serial5 = &lpuart6; + serial6 = &lpuart7; + serial7 = &lpuart8; + spi0 = &flexspi1; + }; + + chosen { + stdout-path = &lpuart1; + }; + + backlight_lvds: backlight-lvds { + compatible = "pwm-backlight"; + pwms = <&tpm5 2 100000 0>; + brightness-levels = <0 4 8 16 32 64 128 255>; + default-brightness-level = <7>; + enable-gpios = <&expander2 6 GPIO_ACTIVE_HIGH>; + power-supply = <®_12v0>; + status = "disabled"; + }; + + clk_eth: clk-eth { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <156250000>; + }; + + /* + * TODO: gate is disabled for now and GPIO are hogged + * ENETC driver switches the clock far too late for ENETC2 + SFP + */ + clk_eth_gate: clk-eth-gate { + compatible = "gpio-gate-clock"; + enable-gpios = <&expander2 0 GPIO_ACTIVE_HIGH>; + clocks = <&clk_eth>; + #clock-cells = <0>; + status = "disabled"; + }; + + clk_xtal25: clk-xtal25 { + compatible = "fixed-clock"; + #clock-cells = <0>; + clock-frequency = <25000000>; + }; + + gpio-keys { + compatible = "gpio-keys"; + autorepeat; + + button-b { + label = "BUTTON_B#"; + linux,code = ; + gpios = <&expander1 0 GPIO_ACTIVE_LOW>; + wakeup-source; + }; + }; + + gpio-leds { + compatible = "gpio-leds"; + + led-1 { + color = ; + function = LED_FUNCTION_STATUS; + gpios = <&expander2 13 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "default-on"; + }; + + led-2 { + color = ; + function = LED_FUNCTION_HEARTBEAT; + gpios = <&expander2 14 GPIO_ACTIVE_HIGH>; + linux,default-trigger = "heartbeat"; + }; + }; + + iio-hwmon { + compatible = "iio-hwmon"; + io-channels = <&adc1 0>, <&adc1 1>, <&adc1 2>, <&adc1 3>, + <&adc1 4>, <&adc1 5>, <&adc1 6>, <&adc1 7>; + }; + + reg_v1v8_mb: regulator-v1v8-mb { + compatible = "regulator-fixed"; + regulator-name = "V_1V8_MB"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_v3v3_mb: regulator-v3v3-mb { + compatible = "regulator-fixed"; + regulator-name = "V_3V3_MB"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_3v3a_10g: regulator-3v3a-10g { + compatible = "regulator-fixed"; + regulator-name = "3V3A_10G"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&expander2 15 GPIO_ACTIVE_HIGH>; + startup-delay-us = <2000>; + enable-active-high; + }; + + reg_12v0: regulator-12v0 { + compatible = "regulator-fixed"; + regulator-name = "12V0"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&expander1 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reg_pwm_fan: regulator-pwm-fan { + compatible = "regulator-fixed"; + regulator-name = "FAN_PWR"; + regulator-min-microvolt = <12000000>; + regulator-max-microvolt = <12000000>; + gpio = <&expander3 15 GPIO_ACTIVE_HIGH>; + enable-active-high; + vin-supply = <®_12v0>; + }; + + reg_lvds: regulator-lvds { + compatible = "regulator-fixed"; + regulator-name = "LCD_PWR_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&expander2 7 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + /* USB NC limitations, RM 162.1.2 VBUS limitations */ + reg_vbus_usb3: regulator-vbus-usb3 { + compatible = "regulator-fixed"; + regulator-min-microvolt = <5000000>; + regulator-max-microvolt = <5000000>; + regulator-name = "USB3_VBUS"; + gpio = <&gpio4 1 GPIO_ACTIVE_HIGH>; + enable-active-high; + }; + + reserved-memory { + #address-cells = <2>; + #size-cells = <2>; + ranges; + + linux_cma: linux,cma { + compatible = "shared-dma-pool"; + reusable; + size = <0 0x28000000>; + alloc-ranges = <0 0x80000000 0 0x80000000>; + linux,cma-default; + }; + }; + + sfp_xfi: sfp-xfi { + compatible = "sff,sfp"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sfp>; + i2c-bus = <&lpi2c7>; + maximum-power-milliwatt = <2000>; + mod-def0-gpios = <&expander1 3 GPIO_ACTIVE_LOW>; + tx-fault-gpios = <&gpio2 30 GPIO_ACTIVE_HIGH>; + los-gpios = <&gpio2 31 GPIO_ACTIVE_HIGH>; + tx-disable-gpios = <&expander2 2 GPIO_ACTIVE_HIGH>; + }; + + sound { + compatible = "fsl,imx-audio-tlv320aic32x4"; + model = "tqm-tlv320aic32"; + audio-codec = <&tlv320aic3x04>; + audio-cpu = <&sai3>; + audio-routing = + "IN3_L", "Mic Jack", + "Mic Jack", "Mic Bias", + "Headphone Jack", "HPL", + "Headphone Jack", "HPR", + "IN1_L", "Line In Jack", + "IN1_R", "Line In Jack", + "Line Out Jack", "LOL", + "Line Out Jack", "LOR"; + }; + + wifi-connector { + compatible = "pcie-m2-e-connector"; + vpcie3v3-supply = <®_v3v3_mb>; + vpcie1v8-supply = <®_v1v8_mb>; + i2c-parent = <&lpi2c2>; + w-disable1-gpios = <&expander2 9 GPIO_ACTIVE_LOW>; + w-disable2-gpios = <&expander2 10 GPIO_ACTIVE_LOW>; + /* UART_WAKE is connected to SM */ + /* SDIO_WAKE is connected to SM */ + sdio-reset-gpios = <&expander3 2 GPIO_ACTIVE_LOW>; + }; +}; + +&adc1 { + status = "okay"; +}; + +&enetc_port0 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enetc0>; + phy-handle = <ðphy0>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +&enetc_port1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_enetc1>; + phy-handle = <ðphy1>; + phy-mode = "rgmii-id"; + status = "okay"; +}; + +/* No support for XFI yet */ +&enetc_port2 { + sfp = <&sfp_xfi>; + phy-mode = "10gbase-r"; + clocks = <&clk_eth>; + clock-names = "enet_ref_clk"; + managed = "in-band-status"; + status = "disabled"; +}; + +&flexcan1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan1>; + status = "okay"; +}; + +&flexcan2 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexcan2>; + status = "okay"; +}; + +&lpi2c2 { + tlv320aic3x04: audio-codec@18 { + compatible = "ti,tlv320aic32x4"; + reg = <0x18>; + clocks = <&scmi_clk IMX95_CLK_SAI3>; + clock-names = "mclk"; + reset-gpios = <&expander1 14 GPIO_ACTIVE_LOW>; + iov-supply = <®_v3v3_mb>; + ldoin-supply = <®_v3v3_mb>; + }; + + fan_controller: fan-controller@2f { + compatible = "microchip,emc2301", "microchip,emc2305"; + reg = <0x2f>; + #address-cells = <1>; + #size-cells = <0>; + #pwm-cells = <3>; + status = "okay"; + + fan: fan@0 { + reg = <0x0>; + pwms = <&fan_controller 40000 PWM_POLARITY_INVERTED 1>; + #cooling-cells = <2>; + fan-supply = <®_pwm_fan>; + }; + }; + + ptn5110: usb-typec@50 { + compatible = "nxp,ptn5110", "tcpci"; + reg = <0x50>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_typec>; + interrupt-parent = <&gpio2>; + interrupts = <28 IRQ_TYPE_LEVEL_LOW>; + + typec_con: connector { + compatible = "usb-c-connector"; + label = "X9"; + power-role = "source"; + data-role = "dual"; + source-pdos = ; + self-powered; + + port { + typec_con_hs: endpoint { + remote-endpoint = <&typec_hs>; + }; + }; + }; + }; + + sensor_mb: temperature-sensor@1e { + compatible = "nxp,se97b", "jedec,jc-42.4-temp"; + reg = <0x1e>; + }; + + eeprom_mb: eeprom@56 { + compatible = "nxp,se97b", "atmel,24c02"; + reg = <0x56>; + pagesize = <16>; + vcc-supply = <®_v3v3_mb>; + }; + + pcieclk: clock-generator@68 { + compatible = "renesas,9fgv0441"; + reg = <0x68>; + clocks = <&clk_xtal25>; + #clock-cells = <1>; + }; + + /* D39 IN/OUT 3V3 */ + expander1: gpio@74 { + compatible = "ti,tca9539"; + reg = <0x74>; + vcc-supply = <®_v3v3_mb>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_expander1>; + gpio-controller; + #gpio-cells = <2>; + interrupt-controller; + #interrupt-cells = <2>; + interrupt-parent = <&gpio2>; + interrupts = <14 IRQ_TYPE_EDGE_FALLING>; + + gpio-line-names = + /* 00 */ "BUTTON_B#", "CAM0_SYNC_3V3", + /* 02 */ "CAM1_SYNC_3V3", "SFP_MOD_ABS", + /* 04 */ "DIG_IN1", "DIG_IN2", + /* 06 */ "DIG_IN3", "DIG_IN4", + /* 08 */ "DIG_OUT_1_2_STATE", "DIG_OUT_3_4_STATE", + /* 10 */ "DIG_OUT_1_EN", "DIG_OUT_2_EN", + /* 12 */ "DIG_OUT_3_EN", "DIG_OUT_4_EN", + /* 14 */ "AUDIO_RST#", "12V_EN"; + }; + + /* D40 OUT 3V3 */ + expander2: gpio@75 { + compatible = "ti,tca9539"; + reg = <0x75>; + vcc-supply = <®_3v3>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + /* 00 */ "ETH10G_REFCLK_EN", "ETH10G_REFCLK_RST#", + /* 02 */ "SFP_TX_DIS", "USB3_RESET#", + /* 04 */ "USB2_RESET#", "LCD_RESET#", + /* 06 */ "LCD_BLT_EN", "LCD_PWR_EN", + /* 08 */ "M2_KEYE_PERST#", "M2_KEYE_WDISABLE1#", + /* 10 */ "M2_KEYE_WDISABLE2#", "M2_KEYB_PERST#", + /* 12 */ "M2_KEYB_WDISABLE1#", "USER_LED1", + /* 14 */ "USER_LED2", "3V3A_10G_EN"; + + eth10g-refclk-en-hog { + gpio-hog; + gpios = <0 GPIO_ACTIVE_HIGH>; + output-high; + line-name = "ETH10G_REFCLK_EN"; + }; + + eth10g-refclk-rst-hog { + gpio-hog; + gpios = <1 GPIO_ACTIVE_LOW>; + output-low; + line-name = "ETH10G_REFCLK_RST#"; + }; + + m2-keyb-wdisable1-hog { + gpio-hog; + gpios = <12 GPIO_ACTIVE_LOW>; + output-low; + line-name = "M2_KEYB_WDISABLE1#"; + }; + }; + + /* D41 OUT 1V8 */ + expander3: gpio@76 { + compatible = "ti,tca9539"; + reg = <0x76>; + vcc-supply = <®_v1v8_mb>; + gpio-controller; + #gpio-cells = <2>; + + gpio-line-names = + /* 00 */ "ENET1_RESET#", "ENET2_RESET#", + /* 02 */ "M2_KEYE_SDIO_RST#", "M2_KEYE_DEV_WLAN_WAKE#", + /* 04 */ "M2_KEYE_DEV_BT_WAKE", "M2_KEYB_W_DISABLE2#", + /* 06 */ "M2_KEYB_RST#", "M2_KEYB_FULL_CARD_PWR_OFF#", + /* 08 */ "M2_KEYB_DPR", "CAM0_PWR#", + /* 10 */ "CAM1_PWR#", "CAM0_RST#", + /* 12 */ "CAM1_RST#", "CAM0_TRIGGER", + /* 14 */ "CAM1_TRIGGER", "FAN_PWR_EN"; + + m2-keye-sdio-rst-hog { + gpio-hog; + gpios = <2 GPIO_ACTIVE_LOW>; + output-low; + line-name = "M2_KEYE_SDIO_RST#"; + }; + + m2-keye-dev_wlan-wake-hog { + gpio-hog; + gpios = <3 GPIO_ACTIVE_LOW>; + input; + line-name = "M2_KEYE_DEV_WLAN_WAKE#"; + }; + + m2-keye-dev_bt-wake-hog { + gpio-hog; + gpios = <4 GPIO_ACTIVE_LOW>; + input; + line-name = "M2_KEYE_DEV_BT_WAKE#"; + }; + + m2-keyb-wdisable2-hog { + gpio-hog; + gpios = <5 GPIO_ACTIVE_LOW>; + output-low; + line-name = "M2_KEYB_WDISABLE1#"; + }; + + m2-keyb-rst-hog { + gpio-hog; + gpios = <6 GPIO_ACTIVE_LOW>; + output-low; + line-name = "M2_KEYB_RST#"; + }; + + m2-keyb-full-card-pwr-off-hog { + gpio-hog; + gpios = <7 GPIO_ACTIVE_LOW>; + output-low; + line-name = "M2_KEYB_FULL_CARD_PWR_OFF#"; + }; + }; +}; + +/* X4 + SFP */ +&lpi2c7 { + clock-frequency = <400000>; + pinctrl-names = "default", "gpio"; + pinctrl-0 = <&pinctrl_lpi2c7>; + pinctrl-1 = <&pinctrl_lpi2c7_recovery>; + scl-gpios = <&gpio2 7 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + sda-gpios = <&gpio2 6 (GPIO_ACTIVE_HIGH | GPIO_OPEN_DRAIN)>; + status = "okay"; + + /* TODO: 0x19: retimer */ + + /* 0x50 / 0x51: SFP EEPROM */ +}; + +/* X4 */ +&lpspi4 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpspi4>; + cs-gpios = <&gpio5 14 GPIO_ACTIVE_LOW>, <&gpio5 13 GPIO_ACTIVE_LOW>; + /* per datasheet, without SCK loopback via pad (LPSPI_CFGR1[SAMPLE]) */ + spi-max-frequency = <30000000>; + status = "okay"; +}; + +&lpuart1 { + /* console */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart1>; + status = "okay"; +}; + +&lpuart2 { + /* SM */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart2>; + status = "reserved"; +}; + +&lpuart5 { + /* X16 M.2 KEY E */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart5>; + status = "okay"; +}; + +&lpuart7 { + /* X5 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart7>; + status = "okay"; +}; + +&lpuart8 { + /* X15 */ + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpuart8>; + linux,rs485-enabled-at-boot-time; + status = "okay"; +}; + +&netc_blk_ctrl { + status = "okay"; +}; + +&netc_emdio { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_emdio>; + status = "okay"; + + /* IRQ pin is AON GPIO, not usable */ + ethphy0: ethernet-phy@0 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <0>; + reset-gpios = <&expander3 0 GPIO_ACTIVE_LOW>; + reset-assert-us = <500000>; + reset-deassert-us = <50000>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,dp83867-rxctrl-strap-quirk; + ti,clk-output-sel = ; + }; + + ethphy1: ethernet-phy@1 { + compatible = "ethernet-phy-ieee802.3-c22"; + reg = <1>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_ethphy1>; + reset-gpios = <&expander3 1 GPIO_ACTIVE_LOW>; + reset-assert-us = <500000>; + reset-deassert-us = <50000>; + interrupt-parent = <&gpio4>; + interrupts = <0 IRQ_TYPE_LEVEL_LOW>; + ti,rx-internal-delay = ; + ti,tx-internal-delay = ; + ti,fifo-depth = ; + ti,dp83867-rxctrl-strap-quirk; + ti,clk-output-sel = ; + }; +}; + +&netc_timer { + status = "okay"; +}; + +&netcmix_blk_ctrl { + status = "okay"; +}; + +/* X16 M2 / E-Key mPCIe */ +&pcie0 { + pinctrl-0 = <&pinctrl_pcie0>; + pinctrl-names = "default"; + clocks = <&scmi_clk IMX95_CLK_HSIO>, + <&scmi_clk IMX95_CLK_HSIOPLL>, + <&scmi_clk IMX95_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX95_CLK_HSIOPCIEAUX>, + <&hsio_blk_ctl 0>, + <&pcieclk 1>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref", "extref"; + reset-gpios = <&expander2 8 GPIO_ACTIVE_LOW>; + /* Not supported on REV.0100 */ + /* supports-clkreq; */ + status = "okay"; +}; + +/* X17 M2 / B-Key PCIe */ +&pcie1 { + pinctrl-0 = <&pinctrl_pcie1>; + pinctrl-names = "default"; + clocks = <&scmi_clk IMX95_CLK_HSIO>, + <&scmi_clk IMX95_CLK_HSIOPLL>, + <&scmi_clk IMX95_CLK_HSIOPLL_VCO>, + <&scmi_clk IMX95_CLK_HSIOPCIEAUX>, + <&hsio_blk_ctl 0>, + <&pcieclk 0>; + clock-names = "pcie", "pcie_bus", "pcie_phy", "pcie_aux", "ref", "extref"; + reset-gpios = <&expander2 11 GPIO_ACTIVE_LOW>; + /* Not supported on REV.0100 */ + /* supports-clkreq; */ + status = "okay"; +}; + +®_sdvmmc { + status = "okay"; +}; + +&sai3 { + #sound-dai-cells = <0>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sai3>; + assigned-clocks = <&scmi_clk IMX95_CLK_AUDIOPLL1_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL2_VCO>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>, + <&scmi_clk IMX95_CLK_AUDIOPLL2>, + <&scmi_clk IMX95_CLK_SAI3>; + assigned-clock-parents = <0>, <0>, <0>, <0>, + <&scmi_clk IMX95_CLK_AUDIOPLL1>; + assigned-clock-rates = <3932160000>, + <3612672000>, <393216000>, + <361267200>, <12288000>; + fsl,sai-mclk-direction-output; + status = "okay"; +}; + +&scmi_bbm { + linux,code = ; +}; + +&thermal_zones { + a55-thermal { + trips { + cpu_active0: trip-active0 { + temperature = <40000>; + hysteresis = <5000>; + type = "active"; + }; + + cpu_active1: trip-active1 { + temperature = <48000>; + hysteresis = <3000>; + type = "active"; + }; + + cpu_active2: trip-active2 { + temperature = <60000>; + hysteresis = <10000>; + type = "active"; + }; + }; + + cooling-maps { + map1 { + trip = <&cpu_active0>; + cooling-device = <&fan 0 2>; + }; + + map2 { + trip = <&cpu_active1>; + cooling-device = <&fan 3 5>; + }; + + map3 { + trip = <&cpu_active2>; + cooling-device = <&fan 6 10>; + }; + }; + }; +}; + +&tpm3 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm3>; + status = "okay"; +}; + +&tpm5 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_tpm5>; +}; + +&usb2 { + dr_mode = "otg"; + hnp-disable; + srp-disable; + adp-disable; + usb-role-switch; + disable-over-current; + samsung,picophy-pre-emp-curr-control = <3>; + samsung,picophy-dc-vol-level-adjust = <7>; + status = "okay"; + + port { + typec_hs: endpoint { + remote-endpoint = <&typec_con_hs>; + }; + }; +}; + +&usb3 { + status = "okay"; +}; + +&usb3_dwc3 { + dr_mode = "host"; + #address-cells = <1>; + #size-cells = <0>; + status = "okay"; + + hub_2_0: hub@1 { + compatible = "usb451,8142"; + reg = <1>; + peer-hub = <&hub_3_0>; + reset-gpios = <&expander2 3 GPIO_ACTIVE_LOW>; + vdd-supply = <®_v3v3_mb>; + #address-cells = <1>; + #size-cells = <0>; + + hub_2_1: hub@1 { + compatible = "usb424,2514"; + reg = <1>; + reset-gpios = <&expander2 4 GPIO_ACTIVE_LOW>; + vdd-supply = <®_v3v3_mb>; + vdda-supply = <®_v3v3_mb>; + }; + }; + + hub_3_0: hub@2 { + compatible = "usb451,8140"; + reg = <2>; + peer-hub = <&hub_2_0>; + reset-gpios = <&expander2 3 GPIO_ACTIVE_LOW>; + vdd-supply = <®_v3v3_mb>; + }; +}; + +&usb3_phy { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_usb3>; + vbus-supply = <®_vbus_usb3>; + status = "okay"; +}; + +/* X7 µSD */ +&usdhc2 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc2>; + pinctrl-1 = <&pinctrl_usdhc2_100mhz>; + pinctrl-2 = <&pinctrl_usdhc2_200mhz>; + vmmc-supply = <®_sdvmmc>; + cd-gpios = <&gpio3 0 GPIO_ACTIVE_LOW>; + no-mmc; + no-sdio; + disable-wp; + bus-width = <4>; + status = "okay"; +}; + +&scmi_iomuxc { + pinctrl_enetc0: enetc0grp { + fsl,pins = , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_enetc1: enetc1grp { + fsl,pins = , + , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_ethphy0: ethphy0grp { + fsl,pins = ; + }; + + pinctrl_ethphy1: ethphy1grp { + fsl,pins = ; + }; + + pinctrl_expander1: expander1grp { + fsl,pins = ; + }; + + pinctrl_flexcan1: flexcan1grp { + fsl,pins = , + ; + }; + + pinctrl_flexcan2: flexcan2grp { + fsl,pins = , + ; + }; + + pinctrl_lpi2c7: lpi2c7grp { + fsl,pins = , + ; + }; + + pinctrl_lpi2c7_recovery: lpi2c7recoverygrp { + fsl,pins = , + ; + }; + + pinctrl_lpspi4: lpspi4grp { + fsl,pins = , + , + , + , + ; + }; + + pinctrl_lpuart1: lpuart1grp { + fsl,pins = , + ; + }; + + pinctrl_lpuart2: lpuart2grp { + fsl,pins = , + ; + }; + + pinctrl_lpuart5: lpuart5grp { + fsl,pins = , + , + , + ; + }; + + pinctrl_lpuart7: lpuart7grp { + fsl,pins = , + , + , + ; + }; + + pinctrl_lpuart8: lpuart8grp { + fsl,pins = , + , + ; + }; + + pinctrl_emdio: emdiogrp { + fsl,pins = , + ; + }; + + pinctrl_pcie0: pcie0grp { + fsl,pins = ; + }; + + pinctrl_pcie1: pcie1grp { + fsl,pins = ; + }; + + pinctrl_sai3: sai3grp { + fsl,pins = , + , + , + , + ; + }; + + pinctrl_retimer: retirmergrp { + fsl,pins = ; + }; + + pinctrl_sfp: sfpgrp { + fsl,pins = , + ; + }; + + pinctrl_tpm3: tpm3grp { + fsl,pins = ; + }; + + pinctrl_tpm5: tpm5grp { + fsl,pins = ; + }; + + pinctrl_typec: typcegrp { + fsl,pins = ; + }; + + pinctrl_usb3: usb3grp { + fsl,pins = ; + }; + + pinctrl_usdhc2: usdhc2grp { + fsl,pins = , + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc2_100mhz: usdhc2-100mhzgrp { + fsl,pins = , + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc2_200mhz: usdhc2-200mhzgrp { + fsl,pins = , + , + , + , + , + , + , + ; + }; +}; diff --git a/arch/arm64/boot/dts/freescale/imx95-tqma9596la.dtsi b/arch/arm64/boot/dts/freescale/imx95-tqma9596la.dtsi new file mode 100644 index 0000000000000..aa2756c14e461 --- /dev/null +++ b/arch/arm64/boot/dts/freescale/imx95-tqma9596la.dtsi @@ -0,0 +1,278 @@ +// SPDX-License-Identifier: (GPL-2.0-or-later OR MIT) +/* + * Copyright (c) 2024-2026 TQ-Systems GmbH , + * D-82229 Seefeld, Germany. + * Author: Alexander Stein + * Author: Markus Niebel + */ + +/dts-v1/; + +#include +#include "imx95.dtsi" + +/ { + memory@80000000 { + device_type = "memory"; + /* + * DRAM base addr, size : 2048 MiB DRAM + * should be corrected by bootloader + */ + reg = <0 0x80000000 0 0x80000000>; + }; + + reg_1v8: regulator-1v8 { + compatible = "regulator-fixed"; + regulator-name = "V_1V8"; + regulator-min-microvolt = <1800000>; + regulator-max-microvolt = <1800000>; + regulator-always-on; + }; + + reg_3v3: regulator-3v3 { + compatible = "regulator-fixed"; + regulator-name = "V_3V3"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + regulator-always-on; + }; + + reg_sdvmmc: regulator-sdvmmc { + compatible = "regulator-fixed"; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_sdvmmc>; + regulator-name = "SD_PWR_EN"; + regulator-min-microvolt = <3300000>; + regulator-max-microvolt = <3300000>; + gpio = <&gpio3 7 GPIO_ACTIVE_HIGH>; + off-on-delay-us = <12000>; + enable-active-high; + /* can be enabled by mainboard with SD-Card support */ + status = "disabled"; + }; +}; + +&adc1 { + vref-supply = <®_1v8>; +}; + +&flexspi1 { + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_flexspi1>; + status = "okay"; + + flash0: flash@0 { + compatible = "jedec,spi-nor"; + reg = <0>; + spi-max-frequency = <66000000>; + spi-tx-bus-width = <4>; + spi-rx-bus-width = <4>; + vcc-supply = <®_1v8>; + + partitions { + compatible = "fixed-partitions"; + #address-cells = <1>; + #size-cells = <1>; + }; + }; +}; + +/* System Manager */ +&gpio1 { + status = "reserved"; +}; + +/* System Manager */ +&lpi2c1 { + status = "reserved"; +}; + +&lpi2c2 { + clock-frequency = <400000>; + pinctrl-names = "default"; + pinctrl-0 = <&pinctrl_lpi2c2>; + status = "okay"; + + pcf85063: rtc@51 { + compatible = "nxp,pcf85063a"; + reg = <0x51>; + quartz-load-femtofarads = <7000>; + }; + + m24c64: eeprom@54 { + compatible = "atmel,24c64"; + reg = <0x54>; + pagesize = <32>; + vcc-supply = <®_3v3>; + }; + + /* protectable identification memory (part of M24C64-D @54) */ + eeprom@5c { + compatible = "atmel,24c64d-wl"; + reg = <0x5c>; + pagesize = <32>; + vcc-supply = <®_3v3>; + }; + + imu@6b { + compatible = "st,ism330dhcx"; + reg = <0x6b>; + vdd-supply = <®_3v3>; + vddio-supply = <®_3v3>; + }; +}; + +&thermal_zones { + pf09-thermal { + polling-delay = <2000>; + polling-delay-passive = <250>; + thermal-sensors = <&scmi_sensor 2>; + + trips { + pf09_alert: trip0 { + hysteresis = <2000>; + temperature = <140000>; + type = "passive"; + }; + + pf09_crit: trip1 { + hysteresis = <2000>; + temperature = <155000>; + type = "critical"; + }; + }; + }; + + pf53arm-thermal { + polling-delay = <2000>; + polling-delay-passive = <250>; + thermal-sensors = <&scmi_sensor 4>; + + cooling-maps { + map0 { + trip = <&pf5301_alert>; + cooling-device = + <&A55_0 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A55_1 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A55_2 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A55_3 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A55_4 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>, + <&A55_5 THERMAL_NO_LIMIT THERMAL_NO_LIMIT>; + }; + }; + + trips { + pf5301_alert: trip0 { + hysteresis = <2000>; + temperature = <140000>; + type = "passive"; + }; + + pf5301_crit: trip1 { + hysteresis = <2000>; + temperature = <155000>; + type = "critical"; + }; + }; + }; + + pf53soc-thermal { + polling-delay = <2000>; + polling-delay-passive = <250>; + thermal-sensors = <&scmi_sensor 3>; + + trips { + pf5302_alert: trip0 { + hysteresis = <2000>; + temperature = <140000>; + type = "passive"; + }; + + pf5302_crit: trip1 { + hysteresis = <2000>; + temperature = <155000>; + type = "critical"; + }; + }; + }; +}; + +&usdhc1 { + pinctrl-names = "default", "state_100mhz", "state_200mhz"; + pinctrl-0 = <&pinctrl_usdhc1>; + pinctrl-1 = <&pinctrl_usdhc1_100mhz>; + pinctrl-2 = <&pinctrl_usdhc1_200mhz>; + bus-width = <8>; + non-removable; + no-sdio; + no-sd; + status = "okay"; +}; + +&wdog3 { + status = "okay"; +}; + +&scmi_iomuxc { + pinctrl_flexspi1: flexspi1grp { + fsl,pins = , + , + , + , + , + /* SION to allow clock loopback from pad */ + , + ; + }; + + pinctrl_lpi2c2: lpi2c2grp { + fsl,pins = , + ; + }; + + pinctrl_sdvmmc: sdvmmcgrp { + fsl,pins = ; + }; + + pinctrl_usdhc1: usdhc1grp { + fsl,pins = , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc1_100mhz: usdhc1-100mhzgrp { + fsl,pins = , + , + , + , + , + , + , + , + , + , + ; + }; + + pinctrl_usdhc1_200mhz: usdhc1-200mhzgrp { + fsl,pins = , + , + , + , + , + , + , + , + , + , + ; + }; +}; -- 2.54.0