From: Thomas Zimmermann <tzimmermann@suse.de>
To: hns@goldelico.com, zhengxingda@iscas.ac.cn,
maarten.lankhorst@linux.intel.com, mripard@kernel.org,
airlied@gmail.com, simona@ffwll.ch, akemnade@kernel.org
Cc: dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
letux-kernel@openphoenux.org, kernel@pyra-handheld.com,
sashiko-reviews@lists.linux.dev,
Thomas Zimmermann <tzimmermann@suse.de>,
stable@vger.kernel.org
Subject: [PATCH v2] drm/fb-helper: Only consider active CRTCs for vblank sync
Date: Mon, 22 Jun 2026 13:33:34 +0200 [thread overview]
Message-ID: <20260622113434.682292-1-tzimmermann@suse.de> (raw)
Only synchronize fbdev output to the vblank of an active CRTC. Go over
the list of CRTCs and pick the first that matches. Fixes warnings as
the one shown below
[ 77.201354] WARNING: drivers/gpu/drm/drm_vblank.c:1320 at drm_crtc_wait_one_vblank+0x194/0x1cc [drm], CPU#1: kworker/1:7/1867
[ 77.201354] omapdrm omapdrm.0: [drm] vblank wait timed out on crtc 0
This currently happens if the fbdev output is not on CRTC 0.
Atomic and non-atomic drivers require distinct code paths. As for other
fbdev operations, implement both and select the correct one at runtime.
Not finding an active CRTC is not a bug. Do not wait in this case, but
flush the display update as before.
v2:
- move look-up code into separate helper
- support drivers with legacy modesetting
v1:
- see https://lore.kernel.org/dri-devel/1c9e0e24-9c4a-4259-8700-cf9e5fd60ca3@suse.de/
Co-authored-by: H. Nikolaus Schaller <hns@goldelico.com>
Signed-off-by: Thomas Zimmermann <tzimmermann@suse.de>
Fixes: d8c4bddcd8bcb ("drm/fb-helper: Synchronize dirty worker with vblank")
Tested-by: Icenowy Zheng <zhengxingda@iscas.ac.cn>
Closes: https://bugs.debian.org/1138033
Cc: <stable@vger.kernel.org> # v6.19+
---
drivers/gpu/drm/drm_fb_helper.c | 71 ++++++++++++++++++++++++++++++++-
1 file changed, 70 insertions(+), 1 deletion(-)
diff --git a/drivers/gpu/drm/drm_fb_helper.c b/drivers/gpu/drm/drm_fb_helper.c
index 7b11a582f8ec..cbf0a9a7b8e5 100644
--- a/drivers/gpu/drm/drm_fb_helper.c
+++ b/drivers/gpu/drm/drm_fb_helper.c
@@ -225,16 +225,85 @@ static void drm_fb_helper_resume_worker(struct work_struct *work)
console_unlock();
}
+static int find_crtc_index_atomic(struct drm_fb_helper *helper)
+{
+ struct drm_device *dev = helper->dev;
+ struct drm_plane *plane;
+
+ drm_for_each_plane(plane, dev) {
+ const struct drm_plane_state *plane_state;
+ const struct drm_crtc *crtc;
+
+ if (plane->type != DRM_PLANE_TYPE_PRIMARY)
+ continue;
+
+ plane_state = plane->state;
+ if (plane_state->fb != helper->fb || !plane_state->crtc)
+ continue; /* plane doesn't display fbdev emulation */
+
+ crtc = plane_state->crtc;
+ if (!crtc->state->active)
+ continue;
+ if (drm_WARN_ON_ONCE(dev, crtc->index > INT_MAX))
+ continue; /* driver bug */
+
+ return crtc->index;
+ }
+
+ return -EINVAL;
+}
+
+static int find_crtc_index_legacy(struct drm_fb_helper *helper)
+{
+ struct drm_device *dev = helper->dev;
+ struct drm_crtc *crtc;
+
+ drm_for_each_crtc(crtc, dev) {
+ struct drm_plane *plane = crtc->primary;
+
+ if (!crtc->enabled)
+ continue;
+ if (!plane || plane->fb != helper->fb)
+ continue; /* CRTC doesn't display fbdev emulation */
+ if (drm_WARN_ON_ONCE(dev, crtc->index > INT_MAX))
+ continue; /* driver bug */
+
+ return crtc->index;
+ }
+
+ return -EINVAL;
+}
+
+static int drm_fb_helper_find_crtc_index(struct drm_fb_helper *helper)
+{
+ struct drm_device *dev = helper->dev;
+ int crtc_index;
+
+ mutex_lock(&dev->mode_config.mutex);
+
+ if (drm_drv_uses_atomic_modeset(dev))
+ crtc_index = find_crtc_index_atomic(helper);
+ else
+ crtc_index = find_crtc_index_legacy(helper);
+
+ mutex_unlock(&dev->mode_config.mutex);
+
+ return crtc_index;
+}
+
static void drm_fb_helper_fb_dirty(struct drm_fb_helper *helper)
{
struct drm_device *dev = helper->dev;
struct drm_clip_rect *clip = &helper->damage_clip;
struct drm_clip_rect clip_copy;
+ int crtc_index;
unsigned long flags;
int ret;
mutex_lock(&helper->lock);
- drm_client_modeset_wait_for_vblank(&helper->client, 0);
+ crtc_index = drm_fb_helper_find_crtc_index(helper);
+ if (crtc_index >= 0)
+ drm_client_modeset_wait_for_vblank(&helper->client, crtc_index);
mutex_unlock(&helper->lock);
if (drm_WARN_ON_ONCE(dev, !helper->funcs->fb_dirty))
--
2.54.0
next reply other threads:[~2026-06-22 11:34 UTC|newest]
Thread overview: 4+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-22 11:33 Thomas Zimmermann [this message]
2026-06-22 13:34 ` Jani Nikula
2026-06-22 14:54 ` Thomas Zimmermann
2026-06-23 7:22 ` H. Nikolaus Schaller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260622113434.682292-1-tzimmermann@suse.de \
--to=tzimmermann@suse.de \
--cc=airlied@gmail.com \
--cc=akemnade@kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=hns@goldelico.com \
--cc=kernel@pyra-handheld.com \
--cc=letux-kernel@openphoenux.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=sashiko-reviews@lists.linux.dev \
--cc=simona@ffwll.ch \
--cc=stable@vger.kernel.org \
--cc=zhengxingda@iscas.ac.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®