From: Arpit Saini <arpit.saini@oss.qualcomm.com>
To: Neil Armstrong <neil.armstrong@linaro.org>,
Jessica Zhang <jesszhan0024@gmail.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>
Cc: arpit.saini@oss.qualcomm.com, linux-arm-msm@vger.kernel.org,
dri-devel@lists.freedesktop.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, ayushi.makhija@oss.qualcomm.com,
rajeevny@qti.qualcomm.com,
Krzysztof Kozlowski <krzysztof.kozlowski@oss.qualcomm.com>
Subject: [PATCH v4 0/2] drm/panel: add support for Ilitek ILI7807S DSI panels
Date: Wed, 01 Jul 2026 16:42:48 +0530 [thread overview]
Message-ID: <20260701-ili7807s-v4-0-c7d76d4780a5@oss.qualcomm.com> (raw)
Add DT bindings and a DRM panel driver for panels based on the Ilitek
ILI7807S display controller. The first supported panel is the DLC
DLC0697 1080x1920@60Hz MIPI DSI panel.
Changes in v4:
- Use active-low reset GPIO semantics: define reset-gpios as active-low
in DT and use hold=1/drop=0 in the driver (Dmitry Baryshkov)
- Replace raw DCS writes with proper helpers: mipi_dsi_dcs_set_tear_on_multi(),
MIPI_DCS_SET_CABC_MIN_BRIGHTNESS, MIPI_DCS_WRITE_CONTROL_DISPLAY,
MIPI_DCS_WRITE_POWER_SAVE (Dmitry Baryshkov)
- Use mipi_dsi_dcs_set_display_brightness_multi() with 0x1fff initial
brightness (Dmitry Baryshkov)
- Move MIPI_DSI_MODE_LPM to probe(), drop toggling in on()/off()
(Dmitry Baryshkov)
- Express .clock as arithmetic expression for clarity (Dmitry Baryshkov)
- Update panel physical dimensions width_mm/height_mm (Dmitry Baryshkov)
- Link to v3: https://lore.kernel.org/r/20260624-ili7807s-v3-0-ddf37052a289@oss.qualcomm.com
Changes in v3:
- Return devm_mipi_dsi_attach() directly (Neil Armstrong)
- Link to v2: https://lore.kernel.org/all/20260618-ili7807s-v2-0-b3f0c109b102@oss.qualcomm.com/
Changes in v2:
- Drop MAINTAINERS entry (Dmitry Baryshkov)
- Use devm_drm_panel_add() instead of drm_panel_add() to avoid
manual drm_panel_remove() in the error path (Dmitry Baryshkov)
- Rework backlight: call drm_panel_of_backlight() first and fall back
to creating a DCS backlight device if panel->backlight is still NULL
(Dmitry Baryshkov)
- Remove backlight-en-gpios from the binding (Dmitry Baryshkov)
- Fix mode_flags LPM not restored on backlight update error path
- Link to v1 : https://lore.kernel.org/all/20260518-ili7807s-panel-v1-0-d7b048163b1c@oss.qualcomm.com/
---
Arpit Saini (2):
dt-bindings: display: panel: add Ilitek ILI7807S panel controller
drm/panel: add Ilitek ILI7807S panel driver
.../bindings/display/panel/ilitek,ili7807s.yaml | 71 +++++
drivers/gpu/drm/panel/Kconfig | 12 +
drivers/gpu/drm/panel/Makefile | 1 +
drivers/gpu/drm/panel/panel-ilitek-ili7807s.c | 285 +++++++++++++++++++++
4 files changed, 369 insertions(+)
---
base-commit: 4e5dfb7c84012007c3c7061126491bbc92d71bf1
change-id: 20260615-ili7807s-panel
Best regards,
--
Arpit Saini <arpit.saini@oss.qualcomm.com>
next reply other threads:[~2026-07-01 11:13 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-01 11:12 Arpit Saini [this message]
2026-07-01 11:12 ` [PATCH v4 1/2] dt-bindings: display: panel: add Ilitek ILI7807S panel controller Arpit Saini
2026-07-01 11:12 ` [PATCH v4 2/2] drm/panel: add Ilitek ILI7807S panel driver Arpit Saini
2026-07-03 8:22 ` Neil Armstrong
2026-07-03 8:42 ` [PATCH v4 0/2] drm/panel: add support for Ilitek ILI7807S DSI panels Neil Armstrong
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260701-ili7807s-v4-0-c7d76d4780a5@oss.qualcomm.com \
--to=arpit.saini@oss.qualcomm.com \
--cc=airlied@gmail.com \
--cc=ayushi.makhija@oss.qualcomm.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dri-devel@lists.freedesktop.org \
--cc=jesszhan0024@gmail.com \
--cc=krzk+dt@kernel.org \
--cc=krzysztof.kozlowski@oss.qualcomm.com \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=rajeevny@qti.qualcomm.com \
--cc=robh@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®