From: Monish Chunara <monish.chunara@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>, Vinod Koul <vkoul@kernel.org>,
Neil Armstrong <neil.armstrong@linaro.org>,
Wesley Cheng <quic_wcheng@quicinc.com>,
Ulf Hansson <ulfh@kernel.org>,
Kernel Team <kernel@oss.qualcomm.com>
Cc: linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org, linux-phy@lists.infradead.org,
linux-mmc@vger.kernel.org,
Nitin Rawat <nitin.rawat@oss.qualcomm.com>,
Pradeep Pragallapati <pradeep.pragallapati@oss.qualcomm.com>,
Komal Bajaj <komal.bajaj@oss.qualcomm.com>,
Monish Chunara <monish.chunara@oss.qualcomm.com>,
Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
Subject: [PATCH V3 0/2] arm64: dts: qcom: Shikra SD Card support
Date: Thu, 2 Jul 2026 13:03:52 +0530 [thread overview]
Message-ID: <20260702073354.3641966-1-monish.chunara@oss.qualcomm.com> (raw)
This is v3 of the Shikra SD Card support series.
This series adds SD card support for the Shikra platform.
The first patch adds the SDHC2 controller node and the necessary pinctrl
configurations to the base Shikra SoC dtsi. The second patch enables
this support on the Shikra EVK (CQS, CQM, and IQS variants) by defining
the regulator supplies and the card detection GPIO.
Signed-off-by: Monish Chunara <monish.chunara@oss.qualcomm.com>
Changes in v3:
- Padded the address part of the reg property in the sdhc_2 node to
8 hex digits with leading zeroes for consistency with other nodes
in the file
- Moved the common sdhc_2 properties to shikra-evk DT file
- Link to v2: https://lore.kernel.org/all/20260630165700.1886608-1-monish.chunara@oss.qualcomm.com
Changes in v2:
- Rectify the alignment for clocks and interconnect properties for SD
card
- Link to v1: https://lore.kernel.org/all/20260604122045.494712-1-monish.chunara@oss.qualcomm.com
Testing:
- Validated on Shikra EVK variants.
This series depends on:
- https://lore.kernel.org/all/20260612-shikra-dt-v6-2-6b6cb58db477@oss.qualcomm.com
Monish Chunara (2):
arm64: dts: qcom: Add SD Card support for Shikra SoC
arm64: dts: qcom: Enable SD card for Shikra EVK
arch/arm64/boot/dts/qcom/shikra-cqm-evk.dts | 9 ++
arch/arm64/boot/dts/qcom/shikra-cqs-evk.dts | 9 ++
arch/arm64/boot/dts/qcom/shikra-evk.dtsi | 11 +++
arch/arm64/boot/dts/qcom/shikra-iqs-evk.dts | 9 ++
arch/arm64/boot/dts/qcom/shikra.dtsi | 97 +++++++++++++++++++++
5 files changed, 135 insertions(+)
--
2.34.1
next reply other threads:[~2026-07-02 7:34 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-02 7:33 Monish Chunara [this message]
2026-07-02 7:33 ` [PATCH V3 1/2] arm64: dts: qcom: Add SD Card support for Shikra SoC Monish Chunara
2026-07-02 12:08 ` Konrad Dybcio
2026-07-02 7:33 ` [PATCH V3 2/2] arm64: dts: qcom: Enable SD card for Shikra EVK Monish Chunara
2026-07-02 12:08 ` Konrad Dybcio
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260702073354.3641966-1-monish.chunara@oss.qualcomm.com \
--to=monish.chunara@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=kernel@oss.qualcomm.com \
--cc=komal.bajaj@oss.qualcomm.com \
--cc=konrad.dybcio@oss.qualcomm.com \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-mmc@vger.kernel.org \
--cc=linux-phy@lists.infradead.org \
--cc=neil.armstrong@linaro.org \
--cc=nitin.rawat@oss.qualcomm.com \
--cc=pradeep.pragallapati@oss.qualcomm.com \
--cc=quic_wcheng@quicinc.com \
--cc=robh@kernel.org \
--cc=ulfh@kernel.org \
--cc=vkoul@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®