mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: Paul Geurts <paul.geurts@prodrive-technologies.com>
To: <jic23@kernel.org>, <dlechner@baylibre.com>, <nuno.sa@analog.com>,
	<andy@kernel.org>, <linux-iio@vger.kernel.org>,
	<linux-kernel@vger.kernel.org>, <tobias.sperling@softing.com>
Cc: Paul Geurts <paul.geurts@prodrive-technologies.com>
Subject: [PATCH v4] iio: ti-ads7138: Disable STATS_EN bit while reading conversion results
Date: Mon, 6 Jul 2026 09:48:03 +0200	[thread overview]
Message-ID: <20260706074803.13624-1-paul.geurts@prodrive-technologies.com> (raw)

There is a data race in reading the STATS registers, resulting in wrong
data being read. When the data in the RECENT register switches between
0x24F0 and 0x2500, occasionally value 0x2400 or 0x25F0 is read. This
happens when the value is updated inbetween reading MSB and LSB.

The datasheet says: "Until a new conversion result is available,
previous values can be read from the statistics registers. Before
reading the statistics registers, set STATS_EN to 0 to prevent any
updates to this register block." As the STATS_EN is currently not
cleared, the values of the stats registers might change mid read,
giving faulty values.

Disable the STATS_EN bit before reading one of the stistics registers to
make sure the device does not update the register mid read. This is
applicable to registers MAX_CHn_xSB, MIN_CHn_xSB and RECENT_CHn_xSB.

This means reading one of the statistics registers resets the MAX and
MIN registers. This is unfortunate, but necessary to get correct data
from the device.

Signed-off-by: Paul Geurts <paul.geurts@prodrive-technologies.com>
Fixes: 93a39542d3c3 ("iio: adc: Add driver for ADS7128 / ADS7138")
---

V1 -> V2: Checked return values and prefixed iio: in commit msg
V2 -> V3:
	- Clarified commit msg
	- Disable STATS_EN for MIN and MAX too
V3 -> V4:
	- Clarified commit msg more
	- Reduced code duplication by creating a statistics read wrapper
	  around read_block

v1: https://lore.kernel.org/all/20260619075646.4100193-1-paul.geurts@prodrive-technologies.com/
v2: https://lore.kernel.org/all/20260619090004.355053-1-paul.geurts@prodrive-technologies.com/
v3: https://lore.kernel.org/all/20260624080131.3669357-1-paul.geurts@prodrive-technologies.com/
---
 drivers/iio/adc/ti-ads7138.c | 40 ++++++++++++++++++++++++++++--------
 1 file changed, 31 insertions(+), 9 deletions(-)

diff --git a/drivers/iio/adc/ti-ads7138.c b/drivers/iio/adc/ti-ads7138.c
index af87f5f19a0f..14096bf3373a 100644
--- a/drivers/iio/adc/ti-ads7138.c
+++ b/drivers/iio/adc/ti-ads7138.c
@@ -227,6 +227,25 @@ static int ads7138_osr_to_bits(int osr)
 	return -EINVAL;
 }
 
+static int ads7138_read_statistics(const struct i2c_client *client, u8 reg,
+				   u8 *out_values, u8 length)
+{
+	int ret;
+
+	/* Disable statistics update so the value is not updated mid read */
+	ret = ads7138_i2c_clear_bit(client, ADS7138_REG_GENERAL_CFG,
+				    ADS7138_GENERAL_CFG_STATS_EN);
+	if (ret)
+		return ret;
+	ret = ads7138_i2c_read_block(client, reg, out_values, length);
+	if (ret)
+		return ret;
+	/* Enable statistics update after read */
+	ret = ads7138_i2c_set_bit(client, ADS7138_REG_GENERAL_CFG,
+				  ADS7138_GENERAL_CFG_STATS_EN);
+	return ret;
+}
+
 static int ads7138_read_raw(struct iio_dev *indio_dev,
 			    struct iio_chan_spec const *chan, int *val,
 			    int *val2, long mask)
@@ -236,28 +255,31 @@ static int ads7138_read_raw(struct iio_dev *indio_dev,
 	u8 values[2];
 
 	switch (mask) {
+	/* Reading the statistics registers reinitializes them. This is unfortunate
+	 * but necessary to prevent data races
+	 */
 	case IIO_CHAN_INFO_RAW:
-		ret = ads7138_i2c_read_block(data->client,
-					     ADS7138_REG_RECENT_LSB_CH(chan->channel),
-					     values, ARRAY_SIZE(values));
+		ret = ads7138_read_statistics(data->client,
+					      ADS7138_REG_RECENT_LSB_CH(chan->channel),
+					      values, ARRAY_SIZE(values));
 		if (ret)
 			return ret;
 
 		*val = get_unaligned_le16(values);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_PEAK:
-		ret = ads7138_i2c_read_block(data->client,
-					     ADS7138_REG_MAX_LSB_CH(chan->channel),
-					     values, ARRAY_SIZE(values));
+		ret = ads7138_read_statistics(data->client,
+					      ADS7138_REG_MAX_LSB_CH(chan->channel),
+					      values, ARRAY_SIZE(values));
 		if (ret)
 			return ret;
 
 		*val = get_unaligned_le16(values);
 		return IIO_VAL_INT;
 	case IIO_CHAN_INFO_TROUGH:
-		ret = ads7138_i2c_read_block(data->client,
-					     ADS7138_REG_MIN_LSB_CH(chan->channel),
-					     values, ARRAY_SIZE(values));
+		ret = ads7138_read_statistics(data->client,
+					      ADS7138_REG_MIN_LSB_CH(chan->channel),
+					      values, ARRAY_SIZE(values));
 		if (ret)
 			return ret;
 
-- 
2.39.2


             reply	other threads:[~2026-07-06  7:48 UTC|newest]

Thread overview: 4+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-06  7:48 Paul Geurts [this message]
2026-07-06 16:30 ` David Lechner
2026-07-06 19:58   ` Andy Shevchenko
2026-07-11 23:14     ` Jonathan Cameron

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260706074803.13624-1-paul.geurts@prodrive-technologies.com \
    --to=paul.geurts@prodrive-technologies.com \
    --cc=andy@kernel.org \
    --cc=dlechner@baylibre.com \
    --cc=jic23@kernel.org \
    --cc=linux-iio@vger.kernel.org \
    --cc=linux-kernel@vger.kernel.org \
    --cc=nuno.sa@analog.com \
    --cc=tobias.sperling@softing.com \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

all inboxes | Powered by JetHome®