Re: [PATCH v7 3/3] EDAC/amd64: Include DRAM address in output

[Yazen Ghannam <yazen.ghannam@amd.com>]

On Mon, Jul 06, 2026 at 05:37:35PM -0700, Borislav Petkov wrote:
> On Tue, Jun 30, 2026 at 05:06:40PM -0400, Yazen Ghannam wrote:
> > From: Avadhut Naik <avadhut.naik@amd.com>
> > 
> > The DRAM address of an error is used by tooling to find failure
> > patterns. This information can be used for general analysis off system.
> > And it can be used on system to take action like offline a page affected
> > by a bad row.
> > 
> > Other EDAC modules (GHES and SKX) provide this information in their
> > output. The AMD64 EDAC module was not able to provide this information,
> > because system-specific translation is needed.
> > 
> > Recent AMD systems provide a PRM handler for DRAM address translation.
> > 
> > Use this PRM handler to get the DRAM address of an error. Include this
> > in the EDAC "other_detail" field.
> > 
> > Also include the Socket and IPID in the EDAC "other_detail" field. These
> > are needed by tooling to translate a DRAM address to a System Physical
> > Address.
> 
>     "Use the DRAM address translated by the PRM handler on AMD systems when
>     reporting an error and add it to the error information that is being
>     logged by EDAC. Also include the Socket and IPID which tooling needs to
>     translate the DRAM address into a SPA (System Physical Address)."
> 
> Plain and simple.
> 

Okay.

> > 
> > [Yazen: Reformat other_detail string]
> > 
> > Signed-off-by: Avadhut Naik <avadhut.naik@amd.com>
> > Co-developed-by: Yazen Ghannam <yazen.ghannam@amd.com>
> > Signed-off-by: Yazen Ghannam <yazen.ghannam@amd.com>
> > ---
> >  drivers/edac/amd64_edac.c | 32 +++++++++++++++++++++++++++++++-
> >  drivers/edac/amd64_edac.h |  3 +++
> >  2 files changed, 34 insertions(+), 1 deletion(-)
> 
> ...
> 
> > @@ -2853,6 +2880,9 @@ static void decode_umc_error(int node_id, struct mce *m)
> >  		goto log_error;
> >  	}
> >  
> > +	if (!amd_convert_umc_addr_to_dram_addr(&a_err, &dram_addr))
> > +		err.dram_addr = &dram_addr;
> 
> I really hate the fact that we have to call PRM twice per error. Is there
> a PRM that can give us both addresses in one go?
> 

There is a one handler per operation. But we can wrap them however we
want. I'll add an AMD_ATL helper to do both translations in one call.

> >  	error_address_to_page_and_offset(sys_addr, &err);
> >  
> >  log_error:
> > diff --git a/drivers/edac/amd64_edac.h b/drivers/edac/amd64_edac.h
> > index 1757c1b99fc8..39c1b6471909 100644
> > --- a/drivers/edac/amd64_edac.h
> > +++ b/drivers/edac/amd64_edac.h
> > @@ -400,6 +400,9 @@ struct err_info {
> >  	u16 syndrome;
> >  	u32 page;
> >  	u32 offset;
> > +	struct atl_dram_addr *dram_addr;
> 
> If you embed it into the enclosing struct:
> 
> 	struct atl_dram_addr dram_addr;
> 
> you'll save yourself a bunch of lines in this patch of noodling through the
> error struct.
> 

Okay.

Thanks,
Yazen