mirror of https://lore.kernel.org/lkml/
 help / color / mirror / Atom feed
From: "Paul E. McKenney" <paulmck@kernel.org>
To: rcu@vger.kernel.org
Cc: linux-kernel@vger.kernel.org, kernel-team@meta.com,
	rostedt@goodmis.org, "Paul E. McKenney" <paulmck@kernel.org>
Subject: [PATCH 04/11] rcutorture: Test RCU readers from hardware interrupt handlers
Date: Wed, 15 Jul 2026 17:25:13 -0700	[thread overview]
Message-ID: <20260716002520.11895-4-paulmck@kernel.org> (raw)
In-Reply-To: <3f56c779-b900-40f9-9a24-6136fb28ddfb@paulmck-laptop>

Although rcutorture has long had the irqreader module parameter, this
parameter results only in RCU readers in softirq handlers, specifically,
timers.  This commit therefore uses smp_call_function_single() to test
RCU readers in real hardware interrupt handlers, thus providing the full
effect from the irqreader module parameter.

However, consistency/debug checks must account for the possibility that
the smp_call_function_single() handler function is directly invoked
from the idle loop, in which case, for example, in_hardirq() will
return false.  This commit uses a per-CPU variable to record being in
the rcu_torture_irq() smp_call_function_single() handler function.

Signed-off-by: Paul E. McKenney <paulmck@kernel.org>
---
 kernel/rcu/rcutorture.c | 77 +++++++++++++++++++++++++++++++++++++----
 1 file changed, 71 insertions(+), 6 deletions(-)

diff --git a/kernel/rcu/rcutorture.c b/kernel/rcu/rcutorture.c
index 0e0ad4cccc3644..2f510743722fce 100644
--- a/kernel/rcu/rcutorture.c
+++ b/kernel/rcu/rcutorture.c
@@ -213,6 +213,7 @@ static long n_rcu_torture_boost_ktrerror;
 static long n_rcu_torture_boost_failure;
 static long n_rcu_torture_boosts;
 static atomic_long_t n_rcu_torture_timers;
+static atomic_long_t n_rcu_torture_irqs;
 static long n_barrier_attempts;
 static long n_barrier_successes; /* did rcu_barrier test succeed? */
 static unsigned long n_read_exits;
@@ -2127,6 +2128,8 @@ static void rcu_torture_reader_do_mbchk(long myid, struct rcu_torture *rtp,
 	smp_store_release(&rtrcp_assigner->rtc_chkrdr, -1); // Assigner can again assign.
 }
 
+static DEFINE_PER_CPU(bool, torture_in_scf_handler);
+
 // Verify the specified RCUTORTURE_RDR* state.
 #define ROEC_ARGS "%s %s: Current %#x  To add %#x  To remove %#x  preempt_count() %#x\n", __func__, s, curstate, new, old, preempt_count()
 static void rcutorture_one_extend_check(char *s, int curstate, int new, int old)
@@ -2136,7 +2139,7 @@ static void rcutorture_one_extend_check(char *s, int curstate, int new, int old)
 	if (!IS_ENABLED(CONFIG_RCU_TORTURE_TEST_CHK_RDR_STATE) || in_nmi())
 		return;
 
-	WARN_ONCE(!(curstate & RCUTORTURE_RDR_IRQ) && irqs_disabled() && !in_hardirq(), ROEC_ARGS);
+	WARN_ONCE(!(curstate & RCUTORTURE_RDR_IRQ) && irqs_disabled() && !in_hardirq() && !this_cpu_read(torture_in_scf_handler), ROEC_ARGS);
 	WARN_ONCE((curstate & RCUTORTURE_RDR_IRQ) && !irqs_disabled(), ROEC_ARGS);
 
 	// If CONFIG_PREEMPT_COUNT=n, further checks are unreliable.
@@ -2153,7 +2156,7 @@ static void rcutorture_one_extend_check(char *s, int curstate, int new, int old)
 
 	// Interrupt handlers have all sorts of stuff disabled, so ignore
 	// unintended disabling.
-	if (in_serving_softirq() || in_hardirq())
+	if (in_serving_softirq() || in_hardirq() || this_cpu_read(torture_in_scf_handler))
 		return;
 
 	WARN_ONCE(cur_ops->extendables &&
@@ -2345,12 +2348,19 @@ rcutorture_extend_mask(int oldmask, struct torture_random_state *trsp)
 			mask |= RCUTORTURE_RDR_RCU_1;
 	}
 
+	/*
+	 * Don't mess with interrupt masking in interrupt handlers.
+	 */
+	if (in_hardirq() || this_cpu_read(torture_in_scf_handler))
+		mask &= ~(preempts_irq | bhs);
+
 	/*
 	 * Can't enable bh w/irq disabled.
 	 */
 	if (mask & RCUTORTURE_RDR_IRQ)
 		mask |= oldmask & bhs;
 
+
 	/*
 	 * Ideally these sequences would be detected in debug builds
 	 * (regardless of RT), but until then don't stop testing
@@ -2605,6 +2615,7 @@ static bool rcu_torture_one_read(struct torture_random_state *trsp, long myid)
 		return false;
 	rtors.rtrsp = rcutorture_loop_extend(&rtors.readstate, trsp, rtors.rtrsp);
 	rcu_torture_one_read_end(&rtors, trsp);
+
 	// This splat will happen on systems built with CONFIG_IRQ_WORK=n
 	// and on systems where arch_irq_work_has_interrupt() returns false.
 	// It might also happen on systems using a short-duration clock
@@ -2643,7 +2654,7 @@ static void rcu_torture_timer(struct timer_list *unused)
 	atomic_long_inc(&n_rcu_torture_timers);
 	(void)rcu_torture_one_read(this_cpu_ptr(&rcu_torture_timer_rand), -1);
 
-	/* Test call_rcu() invocation from interrupt handler. */
+	/* Test call_rcu() invocation from softirq handler. */
 	if (cur_ops->call) {
 		struct rcu_head *rhp = kmalloc_obj(*rhp, GFP_NOWAIT);
 
@@ -2652,6 +2663,41 @@ static void rcu_torture_timer(struct timer_list *unused)
 	}
 }
 
+static DEFINE_TORTURE_RANDOM_PERCPU(rcu_torture_irq_rand);
+
+/*
+ * RCU torture reader from timer handler.  Dereferences rcu_torture_current,
+ * incrementing the corresponding element of the pipeline array.  The
+ * counter in the element should never be greater than 1, otherwise, the
+ * RCU implementation is broken.
+ *
+ * Note that on some systems, "interrupts" from idle are direct calls
+ * rather than interrupts.  The torture_in_scf_handler per-CPU variable
+ * accounts for this case.
+ */
+static void rcu_torture_irq(void *unused)
+{
+	WARN_ON_ONCE(in_nmi());
+	lockdep_assert_irqs_disabled();
+	atomic_long_inc(&n_rcu_torture_irqs);
+	this_cpu_write(torture_in_scf_handler, true);
+	(void)rcu_torture_one_read(this_cpu_ptr(&rcu_torture_irq_rand), -1);
+	this_cpu_write(torture_in_scf_handler, false);
+
+	// Test call_rcu() invocation from interrupt handler.  Interrupts
+	// will always be disabled here, even in CONFIG_PREEMPT_RT=y kernels.
+	// The "right" thing to do would be to create a special-purpose
+	// lockless or raw-spinlock-protected allocator, but in the meantime,
+	// skip testing call_rcu() from interrupt handlers in kernels built
+	// with either CONFIG_PREEMPT_RT=y or CONFIG_PROVE_LOCKING=y.
+	if (cur_ops->call && !IS_ENABLED(CONFIG_PROVE_LOCKING) && !IS_ENABLED(CONFIG_PREEMPT_RT)) {
+		struct rcu_head *rhp = kmalloc_obj(*rhp, GFP_NOWAIT);
+
+		if (rhp)
+			cur_ops->call(rhp, rcu_torture_timer_cb);
+	}
+}
+
 /*
  * RCU torture reader kthread.  Repeatedly dereferences rcu_torture_current,
  * incrementing the corresponding element of the pipeline array.  The
@@ -2661,6 +2707,7 @@ static void rcu_torture_timer(struct timer_list *unused)
 static int
 rcu_torture_reader(void *arg)
 {
+	unsigned long lastscf = jiffies;
 	unsigned long lastsleep = jiffies;
 	long myid = (long)arg;
 	int mynumonline = myid;
@@ -2674,8 +2721,25 @@ rcu_torture_reader(void *arg)
 	tick_dep_set_task(current, TICK_DEP_BIT_RCU);  // CPU bound, so need tick.
 	do {
 		if (irqreader && cur_ops->irq_capable) {
-			if (!timer_pending(&t))
+			if (!timer_pending(&t)) {
+				int cpu;
+
 				mod_timer(&t, jiffies + 1);
+				preempt_disable();
+				cpu = torture_random(&rand) % nr_cpu_ids;
+				if (!cpu_online(cpu)) {
+					cpu = cpumask_next(cpu, cpu_online_mask);
+					if (cpu >= nr_cpu_ids)
+						cpu = cpumask_next(-1, cpu_online_mask);
+				}
+				// An smp_call_function_single() to self is not an interrupt!
+				if (cpu != smp_processor_id() &&
+				    time_after(jiffies, lastscf + HZ * nrealreaders / 50)) {
+					smp_call_function_single(cpu, rcu_torture_irq, NULL, 0);
+					lastscf = jiffies;
+				}
+				preempt_enable();
+			}
 		}
 		if (!rcu_torture_one_read(&rand, myid) && !torture_must_stop())
 			schedule_timeout_interruptible(HZ);
@@ -2951,10 +3015,11 @@ rcu_torture_stats_print(void)
 		atomic_read(&n_rcu_torture_mbchk_fail), atomic_read(&n_rcu_torture_mbchk_tries),
 		n_rcu_torture_barrier_error,
 		n_rcu_torture_boost_ktrerror);
-	pr_cont("rtbf: %ld rtb: %ld nt: %ld ",
+	pr_cont("rtbf: %ld rtb: %ld nt: %ld ni: %ld ",
 		n_rcu_torture_boost_failure,
 		n_rcu_torture_boosts,
-		atomic_long_read(&n_rcu_torture_timers));
+		atomic_long_read(&n_rcu_torture_timers),
+		atomic_long_read(&n_rcu_torture_irqs));
 	if (updownreaders)
 		pr_cont("ndowns: %lu nups: %lu nhrt: %lu nmigrates: %lu ", ndowns, nups, nunexpired,  nmigrates);
 	torture_onoff_stats();
-- 
2.40.1


  parent reply	other threads:[~2026-07-16  0:25 UTC|newest]

Thread overview: 12+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2026-07-16  0:25 [PATCH 0/11] RCU torture-test updates for v7.3 Paul E. McKenney
2026-07-16  0:25 ` [PATCH 01/11] rcutorture: Abstract reader-segment dump into rcu_torture_dump_read_segs() Paul E. McKenney
2026-07-16  0:25 ` [PATCH 02/11] rcutorture: Check for immediate deboosting at reader end Paul E. McKenney
2026-07-16  0:25 ` [PATCH 03/11] rcutorture: Make srcu_read_delay() check for disabled interrupts Paul E. McKenney
2026-07-16  0:25 ` Paul E. McKenney [this message]
2026-07-16  0:25 ` [PATCH 05/11] rcutorture: Use cpumask_next_wrap() in rcu_torture_preempt() Paul E. McKenney
2026-07-16  0:25 ` [PATCH 06/11] rcutorture: Use task_state_to_char() for task-state reporting Paul E. McKenney
2026-07-16  0:25 ` [PATCH 07/11] rcutorture: Add nwriters module parameter Paul E. McKenney
2026-07-16  0:25 ` [PATCH 08/11] rcutorture: Add a stall_only " Paul E. McKenney
2026-07-16  0:25 ` [PATCH 09/11] rcutorture: Test RCU Tasks Trace GP implying RCU GP Paul E. McKenney
2026-07-16  0:25 ` [PATCH 10/11] rcutorture: Make RCU Tasks Trace track Reader Batches Paul E. McKenney
2026-07-16  0:25 ` [PATCH 11/11] rcutorture: Use this_cpu_inc() for rcu_torture_count[] and rcu_torture_batch[] Paul E. McKenney

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20260716002520.11895-4-paulmck@kernel.org \
    --to=paulmck@kernel.org \
    --cc=kernel-team@meta.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=rcu@vger.kernel.org \
    --cc=rostedt@goodmis.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox

Powered by JetHome