[PATCH v2 0/2] i3c: dw: Document optional core reset and drop redundant name

[Shubham Patil <shubhamsanjay.patil@amd.com>]

This series documents the optional core reset for the Synopsys
DesignWare I3C master and updates the driver to match the binding.
The DesignWare I3C master IP has a single core reset input. The
binding never documented this reset, and the driver looked it up by
the "core_rst" name even though a name is redundant for a single
reset line.

This series addresses both:
  - Patch 1 documents the optional 'resets' property in the binding.
    The reset is kept optional because the reset line is
    integration-specific.
  - Patch 2 removes the "core_rst" reset name from the driver and
    looks the reset up by passing NULL, since the name is redundant
    for a single reset.

Changes in v2:
- Updated commit description for binding patch
- Dropped reset-names from the binding
- Added driver patch to remove redundant reset name

Note:
The DesignWare I3C driver support was added by
commit 1dd728f5d4d4 ("i3c: master: Add driver for Synopsys DesignWare IP").

The original Synopsys DesignWare I3C binding was added by
commit 116e246a8bcd ("dt-binding: i3c: Document Synopsys DesignWare I3C"),
but it did not document the optional core reset.
---
Shubham Patil (2):
  dt-bindings: i3c: dw: Document missing optional core reset
  i3c: master: dw: Drop redundant core reset name

 Documentation/devicetree/bindings/i3c/snps,dw-i3c-master.yaml | 3 +++
 drivers/i3c/master/dw-i3c-master.c                            | 2 +-
 2 files changed, 4 insertions(+), 1 deletion(-)


base-commit: a13c140cc289c0b7b3770bce5b3ad42ab35074aa
-- 
2.34.1