From: Pengpeng Hou <pengpeng@iscas.ac.cn>
To: Guenter Roeck <linux@roeck-us.net>
Cc: Sanman Pradhan <psanman@juniper.net>,
Arnd Bergmann <arnd@arndb.de>, Runyu Xiao <runyu.xiao@seu.edu.cn>,
linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org,
Pengpeng Hou <pengpeng@iscas.ac.cn>
Subject: [PATCH v2] hwmon: occ: validate poll response sensor blocks
Date: Mon, 20 Jul 2026 19:58:26 +0800 [thread overview]
Message-ID: <20260720115826.14813-1-pengpeng@iscas.ac.cn> (raw)
The OCC poll response parser walks a counted list of sensor data blocks.
It used the static backing-array capacity as the parse boundary, but a
transport response makes only data_length bytes current and valid. A
truncated response can therefore make the parser consume a block header or
block extent outside the current response.
Use data_length as the parent boundary, prove the fixed poll header and
each current block header before reading them, and prove the complete block
before advancing. Keep parsed sensor metadata local until the complete
response has passed validation, then publish it. Propagate
malformed-response errors before publishing the OCC as active.
Fixes: aa195fe49b03 ("hwmon (occ): Parse OCC poll response")
Signed-off-by: Pengpeng Hou <pengpeng@iscas.ac.cn>
---
Changes since v1: https://lore.kernel.org/all/20260706093317.80867-1-pengpeng@iscas.ac.cn/
- use dev_err() for every malformed response that aborts registration
- publish parsed sensor metadata only after every block passes validation
- limit this revision to the current-response and block-extent contract
- rebase onto v7.2-rc4
drivers/hwmon/occ/common.c | 38 ++++++++++++++++++++++++++++++--------
1 file changed, 30 insertions(+), 8 deletions(-)
diff --git a/drivers/hwmon/occ/common.c b/drivers/hwmon/occ/common.c
index e18e80e832fd..175208d712b0 100644
--- a/drivers/hwmon/occ/common.c
+++ b/drivers/hwmon/occ/common.c
@@ -1052,32 +1052,49 @@ static int occ_setup_sensor_attrs(struct occ *occ)
}
/* only need to do this once at startup, as OCC won't change sensors on us */
-static void occ_parse_poll_response(struct occ *occ)
+static int occ_parse_poll_response(struct occ *occ)
{
unsigned int i, old_offset, offset = 0, size = 0;
+ u16 data_length;
struct occ_sensor *sensor;
- struct occ_sensors *sensors = &occ->sensors;
+ struct occ_sensors parsed = {};
+ struct occ_sensors *sensors = &parsed;
struct occ_response *resp = &occ->resp;
struct occ_poll_response *poll =
(struct occ_poll_response *)&resp->data[0];
struct occ_poll_response_header *header = &poll->header;
struct occ_sensor_data_block *block = &poll->block;
+ data_length = get_unaligned_be16(&resp->data_length);
+ if (data_length < sizeof(*header) || data_length > OCC_RESP_DATA_BYTES) {
+ dev_err(occ->bus_dev, "invalid OCC poll response length %u\n",
+ data_length);
+ return -EMSGSIZE;
+ }
+
dev_info(occ->bus_dev, "OCC found, code level: %.16s\n",
header->occ_code_level);
for (i = 0; i < header->num_sensor_data_blocks; ++i) {
block = (struct occ_sensor_data_block *)((u8 *)block + offset);
+ if (size + sizeof(*header) + sizeof(block->header) >
+ data_length) {
+ dev_err(occ->bus_dev,
+ "truncated OCC sensor block header\n");
+ return -EMSGSIZE;
+ }
+
old_offset = offset;
offset = (block->header.num_sensors *
block->header.sensor_length) + sizeof(block->header);
- size += offset;
/* validate all the length/size fields */
- if ((size + sizeof(*header)) >= OCC_RESP_DATA_BYTES) {
- dev_warn(occ->bus_dev, "exceeded response buffer\n");
- return;
+ if (size + sizeof(*header) + offset > data_length) {
+ dev_err(occ->bus_dev,
+ "exceeded OCC poll response length\n");
+ return -EMSGSIZE;
}
+ size += offset;
dev_dbg(occ->bus_dev, " %04x..%04x: %.4s (%d sensors)\n",
old_offset, offset - 1, block->header.eye_catcher,
@@ -1107,6 +1124,9 @@ static void occ_parse_poll_response(struct occ *occ)
dev_dbg(occ->bus_dev, "Max resp size: %u+%zd=%zd\n", size,
sizeof(*header), size + sizeof(*header));
+ occ->sensors = parsed;
+
+ return 0;
}
int occ_active(struct occ *occ, bool active)
@@ -1138,10 +1158,12 @@ int occ_active(struct occ *occ, bool active)
goto unlock;
}
- occ->active = true;
occ->next_update = jiffies + OCC_UPDATE_FREQUENCY;
- occ_parse_poll_response(occ);
+ rc = occ_parse_poll_response(occ);
+ if (rc)
+ goto unlock;
+ occ->active = true;
rc = occ_setup_sensor_attrs(occ);
if (rc) {
dev_err(occ->bus_dev,
next reply other threads:[~2026-07-20 11:58 UTC|newest]
Thread overview: 2+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-20 11:58 Pengpeng Hou [this message]
2026-07-20 14:30 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260720115826.14813-1-pengpeng@iscas.ac.cn \
--to=pengpeng@iscas.ac.cn \
--cc=arnd@arndb.de \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=psanman@juniper.net \
--cc=runyu.xiao@seu.edu.cn \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®