[PATCH v3 2/4] media: ipu-bridge: Add OVTI5693 to the list of supported sensors

[Fernando Rimoli <fernandorimoli11@gmail.com>]

The IPU bridge builds the firmware node graph only for sensors listed in
ipu_supported_sensors[]. The OV5693 is currently listed only under its
legacy "INT33BE" HID, so on Intel IPU6 Surface devices that enumerate it
as "OVTI5693" (e.g. Microsoft Surface Pro 9) the bridge never wires up
the sensor and the front camera is unusable.

Add an "OVTI5693" entry. The link frequency (419200000) matches the
existing INT33BE entry, as it is the same sensor.

Tested on Surface Pro 9 (IPU6).

Link: https://github.com/linux-surface/linux-surface/pull/2171
Signed-off-by: Fernando Rimoli <fernandorimoli11@gmail.com>
---
 drivers/media/pci/intel/ipu-bridge.c | 2 ++
 1 file changed, 2 insertions(+)

diff --git a/drivers/media/pci/intel/ipu-bridge.c b/drivers/media/pci/intel/ipu-bridge.c
index 88581a4c0..b70d61099 100644
--- a/drivers/media/pci/intel/ipu-bridge.c
+++ b/drivers/media/pci/intel/ipu-bridge.c
@@ -93,6 +93,8 @@ static const struct ipu_sensor_config ipu_supported_sensors[] = {
 	IPU_SENSOR_CONFIG("OVTI2680", 1, 331200000),
 	/* Omnivision OV5675 */
 	IPU_SENSOR_CONFIG("OVTI5675", 1, 450000000),
+	/* Omnivision OV5693 */
+	IPU_SENSOR_CONFIG("OVTI5693", 1, 419200000),
 	/* Omnivision OV8856 */
 	IPU_SENSOR_CONFIG("OVTI8856", 3, 180000000, 360000000, 720000000),
 	/* Sony IMX471 */
-- 
2.43.0