From: Jorijn van der Graaf <jorijnvdgraaf@catcrafts.net>
To: Jonathan Cameron <jic23@kernel.org>,
Jean-Baptiste Maneyrol <jean-baptiste.maneyrol@tdk.com>
Cc: "Jorijn van der Graaf" <jorijnvdgraaf@catcrafts.net>,
"David Lechner" <dlechner@baylibre.com>,
"Nuno Sá" <nuno.sa@analog.com>,
"Andy Shevchenko" <andy@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Krzysztof Kozlowski" <krzk+dt@kernel.org>,
"Conor Dooley" <conor+dt@kernel.org>,
"Chris Morgan" <macromorgan@hotmail.com>,
"Luca Weiss" <luca.weiss@fairphone.com>,
linux-iio@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org
Subject: [PATCH 2/2] iio: imu: inv_icm42600: add support for icm42630
Date: Mon, 20 Jul 2026 19:34:11 +0200 [thread overview]
Message-ID: <20260720173411.82979-3-jorijnvdgraaf@catcrafts.net> (raw)
In-Reply-To: <20260720173411.82979-1-jorijnvdgraaf@catcrafts.net>
The TDK InvenSense ICM-42630 is a 6-axis IMU of the ICM-42600 family,
found e.g. in the Fairphone 6. It is register-compatible with its
siblings (the existing driver works on it unmodified) and reports
WHOAMI value 0x0C.
The part appears to be a mobile SKU and has no public datasheet: the
identity comes from the Fairphone 6 platform documentation and
schematics naming the part, and the WHOAMI value was read from the
hardware, whose bank 0 register defaults match the ICM-42600 family
layout.
Add the chip id, WHOAMI value and I2C/SPI match entries, using the
family default configuration like the ICM-42631.
Tested on the Fairphone 6 via a backport of this change to the
device's 7.1-based kernel (only the id-table style adjusted to that
base), on a bit-banged SPI bus with INT1 wired to the SoC: probe,
accelerometer, gyroscope and temperature raw reads, all full-scale
ranges, multiple sampling frequencies, and watermark-paced FIFO reads
through the INT1 interrupt.
Assisted-by: Claude:claude-fable-5
Signed-off-by: Jorijn van der Graaf <jorijnvdgraaf@catcrafts.net>
---
drivers/iio/imu/inv_icm42600/inv_icm42600.h | 2 ++
drivers/iio/imu/inv_icm42600/inv_icm42600_core.c | 5 +++++
drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c | 4 ++++
drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c | 4 ++++
4 files changed, 15 insertions(+)
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600.h b/drivers/iio/imu/inv_icm42600/inv_icm42600.h
index b55d993f0264..349de5458581 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600.h
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600.h
@@ -28,6 +28,7 @@ enum inv_icm42600_chip {
INV_CHIP_ICM42622,
INV_CHIP_ICM42688,
INV_CHIP_ICM42631,
+ INV_CHIP_ICM42630,
INV_CHIP_NB,
};
@@ -386,6 +387,7 @@ struct inv_icm42600_sensor_state {
#define INV_ICM42600_WHOAMI_ICM42622 0x46
#define INV_ICM42600_WHOAMI_ICM42688 0x47
#define INV_ICM42600_WHOAMI_ICM42631 0x5C
+#define INV_ICM42600_WHOAMI_ICM42630 0x0C
/* User bank 1 (MSB 0x10) */
#define INV_ICM42600_REG_SENSOR_CONFIG0 0x1003
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
index dc97d8a274e3..9a31ca3615b3 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_core.c
@@ -177,6 +177,11 @@ static const struct inv_icm42600_hw inv_icm42600_hw[INV_CHIP_NB] = {
.name = "icm42631",
.conf = &inv_icm42600_default_conf,
},
+ [INV_CHIP_ICM42630] = {
+ .whoami = INV_ICM42600_WHOAMI_ICM42630,
+ .name = "icm42630",
+ .conf = &inv_icm42600_default_conf,
+ },
};
const struct iio_mount_matrix *
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
index 28552d2db91d..c413904c8680 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_i2c.c
@@ -81,6 +81,7 @@ static const struct i2c_device_id inv_icm42600_id[] = {
{ .name = "icm42622", .driver_data = INV_CHIP_ICM42622 },
{ .name = "icm42688", .driver_data = INV_CHIP_ICM42688 },
{ .name = "icm42631", .driver_data = INV_CHIP_ICM42631 },
+ { .name = "icm42630", .driver_data = INV_CHIP_ICM42630 },
{ }
};
MODULE_DEVICE_TABLE(i2c, inv_icm42600_id);
@@ -107,6 +108,9 @@ static const struct of_device_id inv_icm42600_of_matches[] = {
}, {
.compatible = "invensense,icm42631",
.data = (void *)INV_CHIP_ICM42631,
+ }, {
+ .compatible = "invensense,icm42630",
+ .data = (void *)INV_CHIP_ICM42630,
},
{ }
};
diff --git a/drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c b/drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c
index faf743bc6444..a1d12ce3bf87 100644
--- a/drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c
+++ b/drivers/iio/imu/inv_icm42600/inv_icm42600_spi.c
@@ -78,6 +78,7 @@ static const struct spi_device_id inv_icm42600_id[] = {
{ .name = "icm42622", .driver_data = INV_CHIP_ICM42622 },
{ .name = "icm42688", .driver_data = INV_CHIP_ICM42688 },
{ .name = "icm42631", .driver_data = INV_CHIP_ICM42631 },
+ { .name = "icm42630", .driver_data = INV_CHIP_ICM42630 },
{ }
};
MODULE_DEVICE_TABLE(spi, inv_icm42600_id);
@@ -104,6 +105,9 @@ static const struct of_device_id inv_icm42600_of_matches[] = {
}, {
.compatible = "invensense,icm42631",
.data = (void *)INV_CHIP_ICM42631,
+ }, {
+ .compatible = "invensense,icm42630",
+ .data = (void *)INV_CHIP_ICM42630,
},
{ }
};
--
2.55.0
next prev parent reply other threads:[~2026-07-20 17:35 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-20 17:34 [PATCH 0/2] " Jorijn van der Graaf
2026-07-20 17:34 ` [PATCH 1/2] dt-bindings: iio: imu: icm42600: add icm42630 Jorijn van der Graaf
2026-07-21 7:14 ` Jean-Baptiste Maneyrol
2026-07-21 16:01 ` Conor Dooley
2026-07-21 17:16 ` Jorijn van der Graaf
2026-07-22 16:59 ` Conor Dooley
2026-07-24 0:22 ` Jonathan Cameron
2026-07-20 17:34 ` Jorijn van der Graaf [this message]
2026-07-21 7:18 ` [PATCH 2/2] iio: imu: inv_icm42600: add support for icm42630 Jean-Baptiste Maneyrol
2026-07-24 0:25 ` Jonathan Cameron
2026-07-21 7:12 ` [PATCH 0/2] " Jean-Baptiste Maneyrol
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260720173411.82979-3-jorijnvdgraaf@catcrafts.net \
--to=jorijnvdgraaf@catcrafts.net \
--cc=andy@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=dlechner@baylibre.com \
--cc=jean-baptiste.maneyrol@tdk.com \
--cc=jic23@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=luca.weiss@fairphone.com \
--cc=macromorgan@hotmail.com \
--cc=nuno.sa@analog.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®