From: Thierry Cantin-Demers <thierrycantindemers@gmail.com>
To: Jani Nikula <jani.nikula@linux.intel.com>,
Rodrigo Vivi <rodrigo.vivi@intel.com>
Cc: "Jouni Högander" <jouni.hogander@intel.com>,
"Mika Kahola" <mika.kahola@intel.com>,
intel-gfx@lists.freedesktop.org, intel-xe@lists.freedesktop.org,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org,
"Thierry Cantin-Demers" <thierrycantindemers@gmail.com>
Subject: [PATCH v2] drm/i915/psr: Disable eDP Panel Replay on XPS 16 DA16260 (LG 0x07C5)
Date: Mon, 20 Jul 2026 13:52:29 -0400 [thread overview]
Message-ID: <20260720175229.11341-1-thierrycantindemers@gmail.com> (raw)
In-Reply-To: <a036e63561333e3f36896ac0919feab509553bdc.camel@intel.com>
The Dell XPS 16 DA16260 ships in more than one panel variant. The existing
quirk that disables Panel Replay on this laptop (added to fix the low
refresh rate / stutter in issue #7682) only matches the LG Display panel
with DPCD sink OUI 00:22:b9.
Another unit of the same laptop (subsystem 1028:0dba) uses an LG Display
0x07C5 panel with sink OUI 00:aa:01. It shows the identical symptom: the
internal eDP panel updates at only ~5 fps while external displays stay
smooth, with Panel Replay Selective Update stuck (i915_psr_status cycling
SLEEP/SU_STANDBY, no error). Because the OUI differs the existing quirk
does not match and Panel Replay stays enabled.
Add a quirk entry for OUI 00:aa:01 so this variant also gets eDP Panel
Replay disabled. Confirmed xe.enable_panel_replay=0 and a kernel with
this quirk both resolve the stutter.
Fixes: cb8d155b0806 ("drm/i915/psr: Disable Panel Replay on Dell XPS 16 DA16260 as a quirk")
Link: https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7682
Signed-off-by: Thierry Cantin-Demers <thierrycantindemers@gmail.com>
Tested-by: Thierry Cantin-Demers <thierrycantindemers@gmail.com>
---
Hi Jouni,
Thanks for looking. After capturing full drm.debug=0xe logs I should
correct my original description: this does not appear to be a Link CRC
error. That was a one-off reading I have not been able to reproduce.
With Panel Replay enabled and the panel stuck at ~5 fps, i915_psr_status
just cycles SLEEP / SU_STANDBY with no error, and a full drm.debug dmesg
shows nothing. It really seems to be the same low refresh rate / stutter
you already handled in issue #7682:
https://gitlab.freedesktop.org/drm/xe/kernel/-/issues/7682
My machine is the same laptop (XPS 16 DA16260, subsystem 1028:0dba) and
seems to reproduce in the same way, including with no external display
attached: applying a gamma LUT via wlr-gamma-control (I use gammad) early
in the session is enough to leave the panel stuck. The main difference
from #7682 is the panel: mine is an LG Display 0x07C5 with DPCD sink OUI
00:aa:01, so the quirk from cb8d155b0806 (which matches 00:22:b9) does not
cover it and Panel Replay stays enabled.
xe.enable_panel_replay=0 resolves it, and a kernel with the quirk
extended to 00:aa:01 does too. This v2 drops the CRC wording and
references #7682. Happy to test any alternative you prefer.
Rather than open a new ticket right away, I went back and captured proper
logs, and once the CRC description turned out to be wrong it looked like
the same problem as #7682 rather than a new one, so a one-line quirk
extension seemed like the least noisy way to handle it. If after this you
still think it is something different, just let me know and I will gladly
file a fresh gitlab ticket with the full logs.
Thanks a lot for your time,
Thierry
v1 -> v2:
- Reword: describe as the #7682 low-refresh-rate stutter, not a CRC error
- Add Link: to issue #7682
drivers/gpu/drm/i915/display/intel_quirks.c | 8 ++++++++
1 file changed, 8 insertions(+)
diff --git a/drivers/gpu/drm/i915/display/intel_quirks.c b/drivers/gpu/drm/i915/display/intel_quirks.c
index 33245f44c0d5..e452235832fe 100644
--- a/drivers/gpu/drm/i915/display/intel_quirks.c
+++ b/drivers/gpu/drm/i915/display/intel_quirks.c
@@ -286,6 +286,14 @@ static const struct intel_dpcd_quirk intel_dpcd_quirks[] = {
.sink_oui = SINK_OUI(0x00, 0x22, 0xb9),
.hook = quirk_disable_edp_panel_replay,
},
+ /* Dell XPS 16 DA16260 (LG Display 0x07C5, OUI 00:aa:01) */
+ {
+ .device = DEVICE_ID_ANY,
+ .subsystem_vendor = 0x1028,
+ .subsystem_device = 0x0dba,
+ .sink_oui = SINK_OUI(0x00, 0xaa, 0x01),
+ .hook = quirk_disable_edp_panel_replay,
+ },
};
void intel_init_quirks(struct intel_display *display)
--
2.55.0
prev parent reply other threads:[~2026-07-20 17:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-08 13:42 [PATCH] " Thierry Cantin-Demers
2026-07-20 10:31 ` Hogander, Jouni
2026-07-20 17:52 ` Thierry Cantin-Demers [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260720175229.11341-1-thierrycantindemers@gmail.com \
--to=thierrycantindemers@gmail.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=intel-gfx@lists.freedesktop.org \
--cc=intel-xe@lists.freedesktop.org \
--cc=jani.nikula@linux.intel.com \
--cc=jouni.hogander@intel.com \
--cc=linux-kernel@vger.kernel.org \
--cc=mika.kahola@intel.com \
--cc=rodrigo.vivi@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®