From: Yu-Chun Lin <eleanor.lin@realtek.com>
To: <linusw@kernel.org>, <andriy.shevchenko@intel.com>,
<mwalle@kernel.org>, <brgl@kernel.org>, <tychang@realtek.com>,
<wbg@kernel.org>, <mathieu.dubois-briand@bootlin.com>,
<nuno.sa@analog.com>, <Michael.Hennerich@analog.com>,
<jic23@kernel.org>, <andy@kernel.org>,
<u.kleine-koenig@baylibre.com>, <dakr@kernel.org>,
<bhelgaas@google.com>, <o-takashi@sakamocchi.jp>
Cc: <eleanor.lin@realtek.com>, <dlechner@baylibre.com>,
<linux-kernel@vger.kernel.org>, <linux-gpio@vger.kernel.org>,
<linux@analog.com>, <linux-iio@vger.kernel.org>,
<cy.huang@realtek.com>, <james.tai@realtek.com>
Subject: [PATCH v6 0/8] gpio: realtek: Add support for Realtek DHC RTD1625
Date: Tue, 21 Jul 2026 14:57:54 +0800 [thread overview]
Message-ID: <20260721065802.689530-1-eleanor.lin@realtek.com> (raw)
For better review flow, this series includes Andy Shevchenko's
gpio-regmap fix patches [1] as a prerequisite. The first patch
reverts the previously applied patch from Bartosz Golaszewski.
This series then adds GPIO support for the Realtek DHC RTD1625 SoC.
Unlike the existing driver (gpio-rtd.c) which uses shared bank
registers, the RTD1625 features a per-pin register architecture where
each GPIO line is managed by its own dedicated 32-bit control register.
This distinct hardware design requires a new, separate driver.
Link: https://lore.kernel.org/lkml/20260702130903.1790633-1-andriy.shevchenko@linux.intel.com/ [1]
---
Changes in v6:
- The dt-binding patch has already been applied by Bartosz and remains
unchanged. The DTS patch has been applied separately.
Patch 2 & 3:
- Move gpio_regmap_irq_reqres() and gpio_regmap_irq_relres() implementation
from patch 2 to patch 3 for better split.
Patch 3:
- Add '_maybe_unused' to prevent build fail when CONFIG_REGMAP_IRQ is not
enabled.
Patch 5:
- Remove removed the hardcoded write-enable workarounds.
- Retain the necessary prototype updates in every driver using custom
reg_mask_xlate
- Add value_xlate to dynamically adjust the register mask and value right
before the actual register write operation.
Patch 8:
- Add 'select REGMAP_MMIO' into Kconfig.
- Replace GPIOCHIP_IRQ_RESOURCE_HELPERS with explicit irq_request_resources
and irq_release_resources callbacks using gpio_regmap_reqres_irq() and
gpio_regmap_relres_irq() introduced by Andy's patches.
- Replace the '*mask = 0' hack with 'return -ENOTSUPP'.
- Move variable operations out of scoped_guard().
- Add 'struct lock_class_key' to irq_domain map for proper lockdep annotation.
- Remove redundant 'ret' variable.
- Make regmap disable_locking depend on CONFIG_DEBUG_GPIO to avoid
dropping debugfs support unconditionally.
- Replace irq_domain_add_linear() with irq_domain_create_linear() using
dev_fwnode(dev), and manage lifetime with devm_add_action_or_reset().
v5: https://lore.kernel.org/lkml/20260702090115.2564318-1-eleanor.lin@realtek.com/
v4: https://lore.kernel.org/lkml/20260622092335.1166876-1-eleanor.lin@realtek.com/
v3: https://lore.kernel.org/lkml/20260512033317.1602537-1-eleanor.lin@realtek.com/
v2: https://lore.kernel.org/lkml/20260408025243.1155482-1-eleanor.lin@realtek.com/
v1: https://lore.kernel.org/lkml/20260331113835.3510341-1-eleanor.lin@realtek.com/
Andy Shevchenko (3):
gpio: regmap: Provide default IRQ resource request and release
callbacks
gpio: regmap: Apply default resource callbacks for regmap IRQ chip
gpio: regmap: Order kernel-doc descriptions with the actual appearance
Tzuyi Chang (1):
gpio: realtek: Add driver for Realtek DHC RTD1625 SoC
Yu-Chun Lin (4):
Revert "gpio: realtek: Add driver for Realtek DHC RTD1625 SoC"
gpio: regmap: Add gpio_regmap_operation and value_xlate support
gpio: regmap: Add set_config callback
gpio: regmap: Add IRQ enable/disable helpers
drivers/gpio/Kconfig | 2 +
drivers/gpio/gpio-104-idi-48.c | 7 +-
drivers/gpio/gpio-i8255.c | 4 +-
drivers/gpio/gpio-idio-16.c | 6 +-
drivers/gpio/gpio-max7360.c | 8 +-
drivers/gpio/gpio-pcie-idio-24.c | 6 +-
drivers/gpio/gpio-regmap.c | 101 ++++++-
drivers/gpio/gpio-rtd1625.c | 382 +++++++++++++++-----------
drivers/iio/adc/ad7173.c | 8 +-
drivers/iio/addac/stx104.c | 6 +-
drivers/pinctrl/bcm/pinctrl-bcm63xx.c | 1 +
drivers/pinctrl/pinctrl-tps6594.c | 1 +
include/linux/gpio/regmap.h | 75 ++++-
13 files changed, 401 insertions(+), 206 deletions(-)
--
2.43.0
next reply other threads:[~2026-07-21 6:58 UTC|newest]
Thread overview: 28+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-21 6:57 Yu-Chun Lin [this message]
2026-07-21 6:57 ` [PATCH v6 1/8] Revert "gpio: realtek: Add driver for Realtek DHC RTD1625 SoC" Yu-Chun Lin
2026-07-21 10:39 ` Andy Shevchenko
2026-07-23 21:06 ` Linus Walleij
2026-07-21 6:57 ` [PATCH v6 2/8] gpio: regmap: Provide default IRQ resource request and release callbacks Yu-Chun Lin
2026-07-21 7:05 ` Michael Walle
2026-07-21 6:57 ` [PATCH v6 3/8] gpio: regmap: Apply default resource callbacks for regmap IRQ chip Yu-Chun Lin
2026-07-21 7:07 ` Michael Walle
2026-07-21 6:57 ` [PATCH v6 4/8] gpio: regmap: Order kernel-doc descriptions with the actual appearance Yu-Chun Lin
2026-07-21 7:07 ` Michael Walle
2026-07-21 10:43 ` Andy Shevchenko
2026-07-21 6:57 ` [PATCH v6 5/8] gpio: regmap: Add gpio_regmap_operation and value_xlate support Yu-Chun Lin
2026-07-21 7:15 ` Michael Walle
2026-07-21 10:34 ` Yu-Chun Lin [林祐君]
2026-07-21 10:46 ` Andy Shevchenko
2026-07-24 21:50 ` Jonathan Cameron
2026-07-25 12:48 ` Yu-Chun Lin [林祐君]
2026-07-21 6:58 ` [PATCH v6 6/8] gpio: regmap: Add set_config callback Yu-Chun Lin
2026-07-21 7:23 ` Michael Walle
2026-07-21 10:46 ` Yu-Chun Lin [林祐君]
2026-07-21 11:18 ` Michael Walle
2026-07-21 12:10 ` Yu-Chun Lin [林祐君]
2026-07-21 6:58 ` [PATCH v6 7/8] gpio: regmap: Add IRQ enable/disable helpers Yu-Chun Lin
2026-07-21 7:24 ` Michael Walle
2026-07-21 10:54 ` Andy Shevchenko
2026-07-21 6:58 ` [PATCH v6 8/8] gpio: realtek: Add driver for Realtek DHC RTD1625 SoC Yu-Chun Lin
2026-07-21 11:12 ` Andy Shevchenko
2026-07-21 12:09 ` Yu-Chun Lin [林祐君]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260721065802.689530-1-eleanor.lin@realtek.com \
--to=eleanor.lin@realtek.com \
--cc=Michael.Hennerich@analog.com \
--cc=andriy.shevchenko@intel.com \
--cc=andy@kernel.org \
--cc=bhelgaas@google.com \
--cc=brgl@kernel.org \
--cc=cy.huang@realtek.com \
--cc=dakr@kernel.org \
--cc=dlechner@baylibre.com \
--cc=james.tai@realtek.com \
--cc=jic23@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@analog.com \
--cc=mathieu.dubois-briand@bootlin.com \
--cc=mwalle@kernel.org \
--cc=nuno.sa@analog.com \
--cc=o-takashi@sakamocchi.jp \
--cc=tychang@realtek.com \
--cc=u.kleine-koenig@baylibre.com \
--cc=wbg@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®