From: Vincent Cloutier <vincent.cloutier@icloud.com>
To: Sebastian Reichel <sre@kernel.org>
Cc: Hans de Goede <hansg@kernel.org>,
Krzysztof Kozlowski <krzk@kernel.org>,
Marek Szyprowski <m.szyprowski@samsung.com>,
Sebastian Krzyszkowiak <sebastian.krzyszkowiak@puri.sm>,
Purism Kernel Team <kernel@puri.sm>,
Rob Herring <robh@kernel.org>, Conor Dooley <conor+dt@kernel.org>,
linux-pm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Vincent Cloutier <vincent@cloutier.co>
Subject: [PATCH v3 3/4] power: supply: max17042_battery: Honor MAX17055 charge voltage
Date: Tue, 21 Jul 2026 14:57:35 -0400 [thread overview]
Message-ID: <20260721185904.40756-4-vincent.cloutier@icloud.com> (raw)
In-Reply-To: <20260721185904.40756-1-vincent.cloutier@icloud.com>
From: Vincent Cloutier <vincent@cloutier.co>
MAX17055 ModelCfg.VChg selects the charge-voltage range used by EZ Config.
Consume voltage-max-design-microvolt from monitored-battery and set VChg
only when the value is strictly greater than 4.275 V. Reject an explicit
zero voltage and preserve the register when the property is absent.
Update only the VChg bit and verify its read-back so unrelated ModelCfg
fields remain intact. Treat a VChg-only override as an accumulator change:
read effective DesignCap and dQAcc, derive and verify the matching dPAcc,
then request model refresh. This keeps voltage-only firmware descriptions
coherent with the selected charge-voltage range.
Assisted-by: OpenCode:gpt-5.6-sol
Signed-off-by: Vincent Cloutier <vincent@cloutier.co>
---
drivers/power/supply/max17042_battery.c | 42 +++++++++++++++++++++++--
1 file changed, 39 insertions(+), 3 deletions(-)
diff --git a/drivers/power/supply/max17042_battery.c b/drivers/power/supply/max17042_battery.c
index b25bf26135e0..0f6bf6d4c031 100644
--- a/drivers/power/supply/max17042_battery.c
+++ b/drivers/power/supply/max17042_battery.c
@@ -66,6 +66,7 @@
#define MAX17055_DPACC_FACTOR 44138
#define MAX17055_DPACC_VCHG_FACTOR 51200
#define MAX17055_FSTAT_DNR_BIT BIT(0)
+#define MAX17055_VCHG_THRESHOLD_UV 4275000
#define MAX17055_DNR_POLL_US 10000
#define MAX17055_DNR_TIMEOUT_US 2000000
#define MAX17055_INIT_RETRY_DELAY_MS 10000
@@ -83,6 +84,7 @@ struct max17042_chip {
int task_period;
bool enable_current_sense;
bool enable_por_init;
+ bool enable_vchg_override;
bool init_complete;
bool hib_restore_pending;
u16 hib_cfg;
@@ -879,7 +881,8 @@ static inline void max17042_override_por_values(struct max17042_chip *chip)
max17042_override_por(map, MAX17047_V_empty, config->vempty);
}
- if (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17055)
+ if (chip->chip_type == MAXIM_DEVICE_TYPE_MAX17055 &&
+ !chip->enable_vchg_override)
max17042_override_por(map, MAX17055_ModelCfg, config->model_cfg);
}
@@ -914,7 +917,19 @@ static int max17055_override_battery_values(struct max17042_chip *chip)
return ret;
}
- if (!config->design_cap && !config->dqacc)
+ if (chip->enable_vchg_override) {
+ ret = regmap_update_bits(map, MAX17055_ModelCfg,
+ MAX17055_MODELCFG_VCHG_BIT,
+ config->model_cfg &
+ MAX17055_MODELCFG_VCHG_BIT);
+ if (ret)
+ return ret;
+
+ usleep_range(1000, 2000);
+ }
+
+ if (!config->design_cap && !config->dqacc &&
+ !chip->enable_vchg_override)
return 0;
ret = regmap_read(map, MAX17042_DesignCap, &design_cap);
@@ -928,6 +943,10 @@ static int max17055_override_battery_values(struct max17042_chip *chip)
ret = regmap_read(map, MAX17055_ModelCfg, &model_cfg);
if (ret)
return ret;
+ if (chip->enable_vchg_override &&
+ (model_cfg & MAX17055_MODELCFG_VCHG_BIT) !=
+ (config->model_cfg & MAX17055_MODELCFG_VCHG_BIT))
+ return -EIO;
if (!design_cap || !dqacc)
return -ERANGE;
@@ -1248,9 +1267,11 @@ static int max17042_apply_battery_properties(struct max17042_chip *chip,
struct device *dev = chip->dev;
bool have_design_cap;
bool have_ichgt_term;
+ bool have_vchg;
u16 design_cap = 0;
u16 ichgt_term = 0;
u16 dqacc = 0;
+ u16 model_cfg = 0;
u64 data64;
if (!info || chip->chip_type != MAXIM_DEVICE_TYPE_MAX17055)
@@ -1260,7 +1281,8 @@ static int max17042_apply_battery_properties(struct max17042_chip *chip,
info->charge_full_design_uah >= 0;
have_ichgt_term = chip->enable_current_sense &&
info->charge_term_current_ua >= 0;
- if (!have_design_cap && !have_ichgt_term)
+ have_vchg = info->voltage_max_design_uv >= 0;
+ if (!have_design_cap && !have_ichgt_term && !have_vchg)
return 0;
if (have_design_cap) {
@@ -1301,6 +1323,15 @@ static int max17042_apply_battery_properties(struct max17042_chip *chip,
ichgt_term = (u16)data64;
}
+ if (have_vchg) {
+ if (!info->voltage_max_design_uv)
+ return dev_err_probe(dev, -EINVAL,
+ "battery design voltage must be positive\n");
+
+ if (info->voltage_max_design_uv > MAX17055_VCHG_THRESHOLD_UV)
+ model_cfg = MAX17055_MODELCFG_VCHG_BIT;
+ }
+
config = chip->config_data;
if (!config) {
config = devm_kzalloc(dev, sizeof(*config), GFP_KERNEL);
@@ -1314,6 +1345,11 @@ static int max17042_apply_battery_properties(struct max17042_chip *chip,
}
if (have_ichgt_term)
config->ichgt_term = ichgt_term;
+ if (have_vchg) {
+ config->model_cfg &= ~MAX17055_MODELCFG_VCHG_BIT;
+ config->model_cfg |= model_cfg;
+ chip->enable_vchg_override = true;
+ }
chip->config_data = config;
chip->enable_por_init = true;
--
2.55.0
next prev parent reply other threads:[~2026-07-21 18:59 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-21 18:57 [PATCH v3 0/4] power: supply: initialize MAX17055 from battery info Vincent Cloutier
2026-07-21 18:57 ` [PATCH v3 1/4] power: supply: Add registration init callback Vincent Cloutier
2026-07-21 18:57 ` [PATCH v3 2/4] power: supply: max17042_battery: Initialize MAX17055 from battery info Vincent Cloutier
2026-07-21 22:23 ` Sebastian Reichel
2026-07-21 18:57 ` Vincent Cloutier [this message]
2026-07-21 18:57 ` [PATCH v3 4/4] dt-bindings: power: supply: max17042: Allow monitored-battery Vincent Cloutier
2026-07-22 8:12 ` Krzysztof Kozlowski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260721185904.40756-4-vincent.cloutier@icloud.com \
--to=vincent.cloutier@icloud.com \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=hansg@kernel.org \
--cc=kernel@puri.sm \
--cc=krzk@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pm@vger.kernel.org \
--cc=m.szyprowski@samsung.com \
--cc=robh@kernel.org \
--cc=sebastian.krzyszkowiak@puri.sm \
--cc=sre@kernel.org \
--cc=vincent@cloutier.co \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®