[PATCH v2 09/10] arm64: dts: qcom: pmih0108: Enable BCL sensor node

[Manaf Meethalavalappu Pallikunhi <manaf.pallikunhi@oss.qualcomm.com>]

Add Battery Current Limiting (BCL) hardware monitor node for pmih0108
PMIC. The BCL monitors battery voltage and current, providing hardware
interrupts when configurable thresholds are violated.

Signed-off-by: Manaf Meethalavalappu Pallikunhi <manaf.pallikunhi@oss.qualcomm.com>
---
 arch/arm64/boot/dts/qcom/pmih0108.dtsi | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/pmih0108.dtsi b/arch/arm64/boot/dts/qcom/pmih0108.dtsi
index 1c875995d881..1f91e788010b 100644
--- a/arch/arm64/boot/dts/qcom/pmih0108.dtsi
+++ b/arch/arm64/boot/dts/qcom/pmih0108.dtsi
@@ -49,6 +49,15 @@ pmih0108_temp_alarm: temp-alarm@a00 {
 			#thermal-sensor-cells = <0>;
 		};
 
+		sensor@4700 {
+			compatible = "qcom,pmih0108-bcl";
+			reg = <0x4700>;
+			interrupts = <0x7 0x47 0x0 IRQ_TYPE_EDGE_RISING>,
+				     <0x7 0x47 0x1 IRQ_TYPE_EDGE_RISING>;
+			interrupt-names = "max-min",
+					  "critical";
+		};
+
 		pmih0108_gpios: gpio@8800 {
 			compatible = "qcom,pmih0108-gpio", "qcom,spmi-gpio";
 			reg = <0x8800>;

-- 
2.43.0