[PATCH] media: amd: isp4: fix self-deadlock in power-on error path

[Yifei Gao <gyf161023@gmail.com>]

isp4sd_pwron_and_init() holds ops_mutex via guard(mutex) for the entire
function. On any initialization failure it jumps to the err_deinit label
and calls isp4sd_pwroff_and_deinit(), which acquires the same ops_mutex
through its own guard(mutex). Since the guard in isp4sd_pwron_and_init()
still holds the lock at err_deinit, this re-acquires a non-recursive
mutex already held by the current thread and deadlocks.

Every failure path in isp4sd_pwron_and_init() reaches this: a failed
pm_runtime_resume_and_get(), a failed dev_pm_genpd_set_performance_state(),
a firmware start failure in isp4if_start(), or a response-thread creation
failure.

Move the cleanup logic into a new lockless __isp4sd_pwroff_and_deinit()
and have isp4sd_pwroff_and_deinit() call it under the lock. The
err_deinit path, which already holds ops_mutex, now calls the lockless
helper directly.

The "stream still running" check remains in the locked wrapper: it guards
external close requests, and the power-on rollback path never reaches the
STARTED state. The cleanup steps are safe on a partially initialized
device: response-thread stop is guarded per-thread, and gpu memory pools
are released through isp4if_gpu_mem_free(), which is a no-op on
unallocated pools.

Fixes: 4e5e7a7ddb4a ("media: platform: amd: isp4 subdev and firmware loading handling added")
Assisted-by: Claude:claude-opus-4-8 smatch
Signed-off-by: Yifei Gao <gyf161023@gmail.com>
---
 drivers/media/platform/amd/isp4/isp4_subdev.c | 31 ++++++++++---------
 1 file changed, 16 insertions(+), 15 deletions(-)

diff --git a/drivers/media/platform/amd/isp4/isp4_subdev.c b/drivers/media/platform/amd/isp4/isp4_subdev.c
index 48deea79ce6c..eabb6b36705f 100644
--- a/drivers/media/platform/amd/isp4/isp4_subdev.c
+++ b/drivers/media/platform/amd/isp4/isp4_subdev.c
@@ -607,7 +607,8 @@ static int isp4sd_start_resp_proc_threads(struct isp4_subdev *isp_subdev)
 	return 0;
 }
 
-int isp4sd_pwroff_and_deinit(struct v4l2_subdev *sd)
+/* Caller must hold isp_subdev->ops_mutex. */
+static void __isp4sd_pwroff_and_deinit(struct v4l2_subdev *sd)
 {
 	struct isp4_subdev *isp_subdev = to_isp4_subdev(sd);
 	struct isp4sd_sensor_info *sensor_info = &isp_subdev->sensor_info;
@@ -616,31 +617,20 @@ int isp4sd_pwroff_and_deinit(struct v4l2_subdev *sd)
 	struct device *dev = isp_subdev->dev;
 	int ret;
 
-	guard(mutex)(&isp_subdev->ops_mutex);
-	if (sensor_info->status == ISP4SD_START_STATUS_STARTED) {
-		dev_err(dev, "fail for stream still running\n");
-		return -EINVAL;
-	}
-
 	sensor_info->status = ISP4SD_START_STATUS_OFF;
-
 	if (isp_subdev->irq_enabled) {
 		for (unsigned int i = 0; i < ISP4SD_MAX_FW_RESP_STREAM_NUM; i++)
 			disable_irq(isp_subdev->irq[i]);
 		isp_subdev->irq_enabled = false;
 	}
-
 	isp4sd_stop_resp_proc_threads(isp_subdev);
 	dev_dbg(dev, "isp_subdev stop resp proc threads suc\n");
-
 	isp4if_stop(ispif);
-
 	ret = dev_pm_genpd_set_performance_state(dev, perf_state);
 	if (ret)
 		dev_err(dev,
 			"fail to set isp_subdev performance state %u,ret %d\n",
 			perf_state, ret);
-
 	/* hold ccpu reset */
 	isp4hw_wreg(isp_subdev->mmio, ISP_SOFT_RESET, 0);
 	isp4hw_wreg(isp_subdev->mmio, ISP_POWER_STATUS, 0);
@@ -649,11 +639,9 @@ int isp4sd_pwroff_and_deinit(struct v4l2_subdev *sd)
 		dev_err(dev, "power off isp_subdev fail %d\n", ret);
 	else
 		dev_dbg(dev, "power off isp_subdev suc\n");
-
 	ispif->status = ISP4IF_STATUS_PWR_OFF;
 	isp4if_clear_cmdq(ispif);
 	isp4sd_module_enable(isp_subdev, false);
-
 	/*
 	 * When opening the camera, isp4sd_module_enable(isp_subdev, true) is
 	 * called. Hardware requires at least a 20ms delay between disabling
@@ -661,7 +649,20 @@ int isp4sd_pwroff_and_deinit(struct v4l2_subdev *sd)
 	 * during quick reopen scenarios.
 	 */
 	msleep(20);
+}
 
+int isp4sd_pwroff_and_deinit(struct v4l2_subdev *sd)
+{
+	struct isp4_subdev *isp_subdev = to_isp4_subdev(sd);
+	struct isp4sd_sensor_info *sensor_info = &isp_subdev->sensor_info;
+	struct device *dev = isp_subdev->dev;
+
+	guard(mutex)(&isp_subdev->ops_mutex);
+	if (sensor_info->status == ISP4SD_START_STATUS_STARTED) {
+		dev_err(dev, "fail for stream still running\n");
+		return -EINVAL;
+	}
+	__isp4sd_pwroff_and_deinit(sd);
 	return 0;
 }
 
@@ -725,7 +726,7 @@ int isp4sd_pwron_and_init(struct v4l2_subdev *sd)
 
 	return 0;
 err_deinit:
-	isp4sd_pwroff_and_deinit(sd);
+	__isp4sd_pwroff_and_deinit(sd);
 	return -EINVAL;
 }
 
-- 
2.43.0