From mboxrd@z Thu Jan 1 00:00:00 1970 Received: from mail-wr1-f52.google.com (mail-wr1-f52.google.com [209.85.221.52]) (using TLSv1.2 with cipher ECDHE-RSA-AES128-GCM-SHA256 (128/128 bits)) (No client certificate requested) by smtp.subspace.kernel.org (Postfix) with ESMTPS id 257D5385D79 for ; Sun, 26 Jul 2026 11:22:47 +0000 (UTC) Authentication-Results: smtp.subspace.kernel.org; arc=none smtp.client-ip=209.85.221.52 ARC-Seal:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1785064971; cv=none; b=PS1LFLZnm3ryeo2XNpty/lxuZBlfAZ9YQYtEZcXgeK0taFLd5dQ7e/yuditU5PnCez5vku8KNmX+RbQm698nEyq6JT/pojCUDBaHmisfKVzr0q0pQLubb293gq+v7wy4Nz1ctmOVte50KKQRJ7QeLAu1qMP/DYuLp3abaOtTuVg= ARC-Message-Signature:i=1; a=rsa-sha256; d=subspace.kernel.org; s=arc-20240116; t=1785064971; c=relaxed/simple; bh=+fJaezT5Qyk92yI3mtzGQ/jLmHG16HU2ENzynzriwoI=; h=From:To:Cc:Subject:Date:Message-ID:In-Reply-To:References: MIME-Version; b=gHzhSYQljwwXyr63wth9JlRx3BhYn9ZPDQqrJu6wMsynkkxJJL+ZaYgMMCE9d27lZem7wceF2V8yDqK8Z/P8vqoZ2cmkAVjyDPP2Fq5Y+IjkY+TDCgbF+HiBH+xB1u7tdba9KdOl4vf0bP3AHPSKiM54t9FT0bBv+cT5DCMigqo= ARC-Authentication-Results:i=1; smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com; spf=pass smtp.mailfrom=gmail.com; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b=miMD6Z9r; arc=none smtp.client-ip=209.85.221.52 Authentication-Results: smtp.subspace.kernel.org; dmarc=pass (p=none dis=none) header.from=gmail.com Authentication-Results: smtp.subspace.kernel.org; spf=pass smtp.mailfrom=gmail.com Authentication-Results: smtp.subspace.kernel.org; dkim=pass (2048-bit key) header.d=gmail.com header.i=@gmail.com header.b="miMD6Z9r" Received: by mail-wr1-f52.google.com with SMTP id ffacd0b85a97d-47f59f25ec4so567975f8f.2 for ; Sun, 26 Jul 2026 04:22:47 -0700 (PDT) DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=gmail.com; s=20251104; t=1785064966; x=1785669766; darn=vger.kernel.org; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:from:to:cc:subject:date :message-id:reply-to:content-type; bh=W/d+2Ao1HRBsuACqk7R2z8Jr73fTQFf2BR9t/cEB5dM=; b=miMD6Z9rU8X3/De0eJUeGdAjI9WaPs/xAqeQa/uusq8krsaQIgc5HIC8CbPicire9X vo19L80Yos1iKkCbSNl1ItcbDoDsn0qmwf8T+97YaybuOJaOp+kKgNCy1FtTqxts8ZQi tHyc93+HewKiorFECfpOohmO1sI1Uj0RNVLe2gwYz6Dh4wY4NnXmQ+ACs5K5Y3hop/iU +jmOn3MN+e4WwBo2y/Pf/fHh0+icr8Mq/h1D3iIiBMWGNcIXa8Q4CFnhHfDyG/0eqNpf Fx853DzofhY6lv6ZaR2pjj6GLwAH4RpzjrUMvRHvOPZ8XQXJRY5PTDsyuO83RuPvRO08 JBVA== X-Google-DKIM-Signature: v=1; a=rsa-sha256; c=relaxed/relaxed; d=1e100.net; s=20251104; t=1785064966; x=1785669766; h=content-transfer-encoding:mime-version:references:in-reply-to :message-id:date:subject:cc:to:from:x-gm-gg:x-gm-message-state:from :to:cc:subject:date:message-id:reply-to:content-type; bh=W/d+2Ao1HRBsuACqk7R2z8Jr73fTQFf2BR9t/cEB5dM=; b=MwfT21QaAfvQd6KxJPKk1vEU5C2AiHUUcigUKR7no18+EZT7qycXfJr+y1rkSivBU6 8bRhorhUm+exjopVMeq8ZFHkU1qcnPB9oIv1QxzrZTCgsps/WEkqI21jH7Qo5aP21VTr Q20MW6O+pfhwhlpG+Jk2vAbJ72w5tO4Aj64IAOPMGOKfnmZ8hbtlm8Z414ETf3/Z6lZr IsNt997qDEJhP/wiFJZQX7geOdsnlJLnT3rCMusf48EmuXchf76fNyWo/2Y5KxBL09qt PSBM7fk8GMBdidBqSsz14GEUvKLhlh9/SabLlIP4rlGBP8id/GMfcbIg6oeMCArQEd/v 1XbA== X-Forwarded-Encrypted: i=1; AHgh+RpIqF8rh6Amm0dxQJRBu1K4xrRM/SUjJrWKHBNRO05m0biUbGjdCJapKGhP8z+Q9hiMm8HBbMuhsjnSofo=@vger.kernel.org X-Gm-Message-State: AOJu0YwSHflVo+vfbxuVF8WzOLanfkQXTMZZWKLSJ8sTdTD32Gwbs5t+ EbaBi2uxmB2/BIZqgUGgE9DH+cUVappa9tBpuMJ2kHu6vArpmg9f5j9J X-Gm-Gg: AR+sD11OpB+r2UGJuBlcDtGYYVnxL5AaG1zeprxkAjRr/k1mUtitBbgb5PoCapqurM3 Nl4AQb/6oeo9DmJ1Bj7BeOiLwDFVulO5fHYWQYsajA03VVfcAgQZScax9hjo3puXdOf8Q6jjNEd o9tOfaw0iTCF/7EhZIpcfs1MK6H2TjEs7ngsmQqpbJ2RG48HaIjQ1Bei2FrAHdcvgQ5oiMlVPOz vnZGbb8OTlgme1gA7UoWhC00E5TiMyrv9uHdVqwAhPUCRiMDmKiiKDdJz/CKLOJztH1w8nan0tO YjFigEJKAZzgBMOQHMPkAn7dICh1T7nPcNFTCF9K9Pa57svVVsJaV9a8IbQijp/Wvsnzqyxpvs6 289bXffY19yiLe6J2ttnG2OpSqHO79Wy5RmLHuZKpalZPwG5bHNvhs0VJ11FRRISGpL+PZ3DApo x1yaZsm0gTC+eYBtA= X-Received: by 2002:adf:e19b:0:b0:47f:8183:e9b8 with SMTP id ffacd0b85a97d-47f9fc8dce3mr6024682f8f.22.1785064965623; Sun, 26 Jul 2026 04:22:45 -0700 (PDT) Received: from builder ([2001:9e8:f12e:8416:be24:11ff:fe30:5d85]) by smtp.gmail.com with ESMTPSA id ffacd0b85a97d-47f939c1465sm24902981f8f.26.2026.07.26.04.22.44 (version=TLS1_3 cipher=TLS_AES_256_GCM_SHA384 bits=256/256); Sun, 26 Jul 2026 04:22:45 -0700 (PDT) From: Jonas Jelonek To: Oleksij Rempel , Kory Maincent , Andrew Lunn , "David S . Miller" , Eric Dumazet , Jakub Kicinski , Paolo Abeni , Rob Herring , Krzysztof Kozlowski , Conor Dooley Cc: netdev@vger.kernel.org, devicetree@vger.kernel.org, linux-kernel@vger.kernel.org, Daniel Golle , =?UTF-8?q?Bj=C3=B8rn=20Mork?= , Jonas Jelonek Subject: [PATCH net-next v9 1/4] dt-bindings: net: pse-pd: add bindings for Realtek PSE MCU Date: Sun, 26 Jul 2026 11:22:19 +0000 Message-ID: <20260726112223.1286074-2-jelonek.jonas@gmail.com> X-Mailer: git-send-email 2.53.0 In-Reply-To: <20260726112223.1286074-1-jelonek.jonas@gmail.com> References: <20260726112223.1286074-1-jelonek.jonas@gmail.com> Precedence: bulk X-Mailing-List: linux-kernel@vger.kernel.org List-Id: List-Subscribe: List-Unsubscribe: MIME-Version: 1.0 Content-Transfer-Encoding: 8bit Add a binding for the microcontroller (MCU) that fronts the PSE silicon on a range of managed Realtek-based switches. The host talks only to the MCU, over I2C/SMBus or UART, using a fixed message-based protocol; the PSE chips behind it never appear on the bus. The device is the MCU together with its Realtek firmware: the firmware and its host protocol are what the binding describes, not the general-purpose microcontroller they run on. The PSE silicon behind the MCU (Realtek or Broadcom) is reported by the MCU and detected at runtime, so it is not described here - hence the 'realtek' vendor prefix. Two protocol generations exist, both Realtek's, selected by the compatible: gen1 on older boards (fronting Broadcom PSE silicon) and gen2, the altered protocol used with Realtek's own PSE silicon. On an I2C attachment the framing the MCU firmware expects is part of the compatible as well - '-smbus' or raw '-i2c'; a UART attachment carries no framing suffix, as the transport is given by the parent serial node. Each board additionally carries a device-specific compatible that falls back to one of the protocol compatibles above. Drivers bind on the protocol compatible; the device-specific string identifies the board and reserves a place for a future per-board quirk without having to retrofit device trees already in the field. Signed-off-by: Jonas Jelonek --- .../net/pse-pd/realtek,pse-mcu-gen1.yaml | 180 ++++++++++++++++++ 1 file changed, 180 insertions(+) create mode 100644 Documentation/devicetree/bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml diff --git a/Documentation/devicetree/bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml b/Documentation/devicetree/bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml new file mode 100644 index 000000000000..0f1a819db49b --- /dev/null +++ b/Documentation/devicetree/bindings/net/pse-pd/realtek,pse-mcu-gen1.yaml @@ -0,0 +1,180 @@ +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause) +%YAML 1.2 +--- +$id: http://devicetree.org/schemas/net/pse-pd/realtek,pse-mcu-gen1.yaml# +$schema: http://devicetree.org/meta-schemas/core.yaml# + +title: Realtek PSE MCU + +maintainers: + - Jonas Jelonek + +description: | + A microcontroller (MCU) that manages the PSE (Power Sourcing Equipment) + hardware on a range of managed PoE switches. The host CPU talks only to + this MCU - over I2C/SMBus or UART - using a small message-based protocol; + the PSE silicon it drives sits behind the MCU and is never accessed + directly. For example, on the Zyxel GS1900-10HP the SoC reaches the MCU + over UART, and the MCU manages the on-board PSE chip. + + This binding describes the MCU together with its Realtek firmware: the + firmware and its host protocol, which are stable across boards. The + microcontroller silicon is a general-purpose part that varies, and the + PSE silicon behind the MCU (Realtek RTL823x/RTL8239* or Broadcom + BCM59xxx) is reported by the MCU and detected at runtime - neither is + named here. + + Two protocol generations exist, both Realtek's: + gen1 older boards, where the MCU fronts Broadcom PSE silicon + gen2 the altered protocol used with Realtek's own PSE silicon + + On an I2C attachment the framing the MCU firmware expects is part of the + compatible: '-smbus' (reads carry a leading command byte and a repeated + start) or '-i2c' (bare block writes and reads). A UART attachment carries + no framing suffix; the transport is given by the parent 'serial' node. + + Each board additionally carries a device-specific compatible that falls + back to one of the protocol compatibles above. Drivers bind on the + protocol compatible; the device-specific string identifies the board and + reserves a place for a future per-board quirk without having to retrofit + device trees already in the field. + +properties: + compatible: + oneOf: + # UART + - items: + - enum: + - zyxel,gs1900-10hp-a1-pse + - const: realtek,pse-mcu-gen1 + + # I2C, SMBus framing + - items: + - enum: + - zyxel,gs1920-24hp-v2-pse + - const: realtek,pse-mcu-gen1-smbus + + # UART + - items: + - enum: + - zyxel,gs1900-10hp-b1-pse + - zyxel,xmg1915-10ep-pse + - const: realtek,pse-mcu-gen2 + + # I2C, SMBus framing + - items: + - enum: + - zyxel,xs1930-12hp-pse + - const: realtek,pse-mcu-gen2-smbus + + # I2C, raw framing + - items: + - enum: + - linksys,lgs328mpc-v2-pse + - const: realtek,pse-mcu-gen2-i2c + + reg: + maxItems: 1 + + reset-gpios: + description: Reset line of the MCU. + maxItems: 1 + + disable-ports-gpios: + description: + Hardware gate that forces all ports into admin-disabled state while + asserted. + maxItems: 1 + +required: + - compatible + +allOf: + - $ref: pse-controller.yaml# + - $ref: /schemas/serial/serial-peripheral-props.yaml# + # A '-smbus'/'-i2c' compatible is an I2C attachment: it has 'reg' and + # cannot carry serial bus properties. A bare gen compatible is a UART + # attachment: no 'reg', the transport comes from the parent serial node. + - if: + properties: + compatible: + contains: + enum: + - realtek,pse-mcu-gen1-smbus + - realtek,pse-mcu-gen2-smbus + - realtek,pse-mcu-gen2-i2c + then: + required: + - reg + properties: + current-speed: false + max-speed: false + else: + properties: + reg: false + +unevaluatedProperties: false + +examples: + # SMBus-framed I2C attachment + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-pse@20 { + compatible = "zyxel,xs1930-12hp-pse", "realtek,pse-mcu-gen2-smbus"; + reg = <0x20>; + + pse-pis { + #address-cells = <1>; + #size-cells = <0>; + + pse-pi@0 { + reg = <0>; + #pse-cells = <0>; + }; + }; + }; + }; + + # Raw-I2C-framed attachment + - | + i2c { + #address-cells = <1>; + #size-cells = <0>; + + ethernet-pse@20 { + compatible = "linksys,lgs328mpc-v2-pse", "realtek,pse-mcu-gen2-i2c"; + reg = <0x20>; + + pse-pis { + #address-cells = <1>; + #size-cells = <0>; + + pse-pi@0 { + reg = <0>; + #pse-cells = <0>; + }; + }; + }; + }; + + # UART attachment + - | + serial { + ethernet-pse { + compatible = "zyxel,gs1900-10hp-a1-pse", "realtek,pse-mcu-gen1"; + current-speed = <19200>; + + pse-pis { + #address-cells = <1>; + #size-cells = <0>; + + pse-pi@0 { + reg = <0>; + #pse-cells = <0>; + }; + }; + }; + }; -- 2.53.0