From: Yu-Chun Lin <eleanor.lin@realtek.com>
To: <linusw@kernel.org>, <andriy.shevchenko@intel.com>,
<mwalle@kernel.org>, <brgl@kernel.org>, <tychang@realtek.com>,
<wbg@kernel.org>, <mathieu.dubois-briand@bootlin.com>,
<nuno.sa@analog.com>, <Michael.Hennerich@analog.com>,
<jic23@kernel.org>, <andy@kernel.org>, <o-takashi@sakamocchi.jp>
Cc: <u.kleine-koenig@baylibre.com>, <dakr@kernel.org>,
<bhelgaas@google.com>, <eleanor.lin@realtek.com>,
<dlechner@baylibre.com>, <linux-kernel@vger.kernel.org>,
<linux-gpio@vger.kernel.org>, <linux@analog.com>,
<linux-iio@vger.kernel.org>, <cy.huang@realtek.com>,
<james.tai@realtek.com>, <stanley_chang@realtek.com>
Subject: [PATCH v8 7/9] gpio: regmap: Add set_config callback
Date: Sun, 26 Jul 2026 20:51:58 +0800 [thread overview]
Message-ID: <20260726125209.140307-8-eleanor.lin@realtek.com> (raw)
In-Reply-To: <20260726125209.140307-1-eleanor.lin@realtek.com>
Add a new set_config callback to allow drivers to implement
hardware-specific configuration such as debounce settings, or other
platform-specific GPIO properties.
Reviewed-by: Michael Walle <mwalle@kernel.org>
Reviewed-by: Linus Walleij <linusw@kernel.org>
Signed-off-by: Yu-Chun Lin <eleanor.lin@realtek.com>
---
Changes in v8:
- Move the assignment of gpio->set_config into the if (config->set_config)
block.
- Add Reviewed-by tags from Michael and Linus.
---
drivers/gpio/gpio-regmap.c | 17 +++++++++++++++++
include/linux/gpio/regmap.h | 6 ++++++
2 files changed, 23 insertions(+)
diff --git a/drivers/gpio/gpio-regmap.c b/drivers/gpio/gpio-regmap.c
index cff7db8036f7..19e33e361cc4 100644
--- a/drivers/gpio/gpio-regmap.c
+++ b/drivers/gpio/gpio-regmap.c
@@ -51,6 +51,9 @@ struct gpio_regmap {
unsigned int reg, unsigned int *mask,
unsigned int *val);
+ int (*set_config)(struct gpio_regmap *gpio, struct gpio_chip *chip,
+ unsigned int offset, unsigned long config);
+
void *driver_data;
};
@@ -306,6 +309,15 @@ static int gpio_regmap_direction_output(struct gpio_chip *chip,
return gpio_regmap_set_direction(chip, offset, true);
}
+static int gpio_regmap_set_config(struct gpio_chip *chip,
+ unsigned int offset,
+ unsigned long cfg)
+{
+ struct gpio_regmap *gpio = gpiochip_get_data(chip);
+
+ return gpio->set_config(gpio, chip, offset, cfg);
+}
+
int gpio_regmap_reqres_irq(struct gpio_regmap *gpio, unsigned int offset)
{
return gpiochip_reqres_irq(&gpio->gpio_chip, offset);
@@ -444,6 +456,11 @@ struct gpio_regmap *gpio_regmap_register(const struct gpio_regmap_config *config
gpio->value_xlate = config->value_xlate;
+ if (config->set_config) {
+ gpio->set_config = config->set_config;
+ chip->set_config = gpio_regmap_set_config;
+ }
+
ret = gpiochip_add_data(chip, gpio);
if (ret < 0)
goto err_free_bitmap_output;
diff --git a/include/linux/gpio/regmap.h b/include/linux/gpio/regmap.h
index 77dbb353bc1f..dd9de9958409 100644
--- a/include/linux/gpio/regmap.h
+++ b/include/linux/gpio/regmap.h
@@ -86,6 +86,9 @@ enum gpio_regmap_operation {
* to append additional bits (like write-enable masks)
* dynamically based on the current operation
* (GPIO_REGMAP_SET_OP and GPIO_REGMAP_SET_DIR_OP).
+ * @set_config: (Optional) Callback for setting GPIO configuration such
+ * as debounce, drive strength, or other hardware specific
+ * settings.
* @drvdata: (Optional) Pointer to driver specific data which is
* not used by gpio-remap but is provided "as is" to the
* driver callback(s).
@@ -147,6 +150,9 @@ struct gpio_regmap_config {
unsigned int base, unsigned int offset, unsigned int reg,
unsigned int *mask, unsigned int *val);
+ int (*set_config)(struct gpio_regmap *gpio, struct gpio_chip *chip,
+ unsigned int offset, unsigned long config);
+
void *drvdata;
};
--
2.43.0
next prev parent reply other threads:[~2026-07-26 12:52 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-26 12:51 [PATCH v8 0/9] gpio: realtek: Add support for Realtek DHC RTD1625 Yu-Chun Lin
2026-07-26 12:51 ` [PATCH v8 1/9] Revert "gpio: realtek: Add driver for Realtek DHC RTD1625 SoC" Yu-Chun Lin
2026-07-26 12:51 ` [PATCH v8 2/9] gpio: regmap: Provide default IRQ resource request and release callbacks Yu-Chun Lin
2026-07-26 12:51 ` [PATCH v8 3/9] gpio: regmap: Apply default resource callbacks for regmap IRQ chip Yu-Chun Lin
2026-07-26 12:51 ` [PATCH v8 4/9] gpio: regmap: Order kernel-doc descriptions with the actual appearance Yu-Chun Lin
2026-07-26 12:51 ` [PATCH v8 5/9] gpio: regmap: Add gpio_regmap_operation to extend reg_mask_xlate callback Yu-Chun Lin
2026-07-26 12:51 ` [PATCH v8 6/9] gpio: regmap: Add value_xlate callback Yu-Chun Lin
2026-07-26 12:51 ` Yu-Chun Lin [this message]
2026-07-26 12:51 ` [PATCH v8 8/9] gpio: regmap: Add IRQ enable/disable helpers Yu-Chun Lin
2026-07-26 12:52 ` [PATCH v8 9/9] gpio: realtek: Add driver for Realtek DHC RTD1625 SoC Yu-Chun Lin
2026-07-27 8:20 ` Mathieu Dubois-Briand
2026-07-27 11:10 ` Bartosz Golaszewski
2026-07-27 11:23 ` Mathieu Dubois-Briand
2026-07-27 13:04 ` Bartosz Golaszewski
2026-07-27 14:07 ` Mathieu Dubois-Briand
2026-08-06 23:44 ` Andy Shevchenko
2026-07-30 9:05 ` [PATCH v8 0/9] gpio: realtek: Add support for Realtek DHC RTD1625 Bartosz Golaszewski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260726125209.140307-8-eleanor.lin@realtek.com \
--to=eleanor.lin@realtek.com \
--cc=Michael.Hennerich@analog.com \
--cc=andriy.shevchenko@intel.com \
--cc=andy@kernel.org \
--cc=bhelgaas@google.com \
--cc=brgl@kernel.org \
--cc=cy.huang@realtek.com \
--cc=dakr@kernel.org \
--cc=dlechner@baylibre.com \
--cc=james.tai@realtek.com \
--cc=jic23@kernel.org \
--cc=linusw@kernel.org \
--cc=linux-gpio@vger.kernel.org \
--cc=linux-iio@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@analog.com \
--cc=mathieu.dubois-briand@bootlin.com \
--cc=mwalle@kernel.org \
--cc=nuno.sa@analog.com \
--cc=o-takashi@sakamocchi.jp \
--cc=stanley_chang@realtek.com \
--cc=tychang@realtek.com \
--cc=u.kleine-koenig@baylibre.com \
--cc=wbg@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®