From: Luiz Angelo Daros de Luca <luizluca@gmail.com>
To: Guenter Roeck <linux@roeck-us.net>,
Chris Packham <chris.packham@alliedtelesis.co.nz>,
Andrew Morton <akpm@linux-foundation.org>,
"Darrick J. Wong" <djwong@us.ibm.com>,
"Mark M. Hoffman" <mhoffman@lightlink.com>
Cc: linux-hwmon@vger.kernel.org, linux-kernel@vger.kernel.org,
Luiz Angelo Daros de Luca <luizluca@gmail.com>,
sashiko-bot@kernel.org
Subject: [hwmon PATCH v2 5/8] hwmon: (adt7470) Fix temperature alarm logic in hwmon_temp_read()
Date: Mon, 27 Jul 2026 21:22:21 -0300 [thread overview]
Message-ID: <20260727-adt7470_fixes-v2-5-598e38a46ba6@gmail.com> (raw)
In-Reply-To: <20260727-adt7470_fixes-v2-0-598e38a46ba6@gmail.com>
During the conversion the alarm callback started interpreting the
channel index as an alarm bitmask, resulting in incorrect alarm
reporting. Compute the proper alarm bit instead.
Reported-by: sashiko-bot@kernel.org
Closes: https://lore.kernel.org/r/20260717211224.B9E291F000E9@smtp.kernel.org
Fixes: fc958a61ff6d ("hwmon: (adt7470) Convert to devm_hwmon_device_register_with_info API")
Signed-off-by: Luiz Angelo Daros de Luca <luizluca@gmail.com>
---
drivers/hwmon/adt7470.c | 19 +++++++++++++++++--
1 file changed, 17 insertions(+), 2 deletions(-)
diff --git a/drivers/hwmon/adt7470.c b/drivers/hwmon/adt7470.c
index a34635526aaa..c6fc7d38d698 100644
--- a/drivers/hwmon/adt7470.c
+++ b/drivers/hwmon/adt7470.c
@@ -110,6 +110,21 @@ static const unsigned short normal_i2c[] = { 0x2C, 0x2E, 0x2F, I2C_CLIENT_END };
#define ALARM2(x) ((x) << 8)
+/* TEMP1..TEMP7 (ch 0..6) are, respectively BIT(0)..BIT(6) of reg 0x41 and
+ * 0x72, or BIT(0)..BIT(6) of data->alarm.
+ * TEMP8..TEMP9 (ch 7..9) are, respectively BIT(0)..BIT(2) of reg 0x42 and
+ * 0x73, or BIT(8)..BIT(10) of data->alarm.
+ */
+#define TEMP_ALARM_BIT(ch) ({ \
+ typeof(ch) _ch = (ch); \
+ (1 << (_ch < 7 ? _ch : _ch + 1)); \
+})
+
+/* FAN1..FAN4 (ch 0..3) are respectively BIT(4)..BIT(7) in
+ * reg 0x42 and 0x73 or BIT(12)..BIT(15) in data->alarm.
+ */
+#define FAN_ALARM_BIT(ch) (1 << (12 + (ch)))
+
#define ADT7470_VENDOR 0x41
#define ADT7470_DEVICE 0x70
/* datasheet only mentions a revision 2 */
@@ -569,7 +584,7 @@ static int adt7470_temp_read(struct device *dev, u32 attr, int channel, long *va
*val = 1000 * data->temp_max[channel];
break;
case hwmon_temp_alarm:
- *val = !!(data->alarm & channel);
+ *val = !!(data->alarm & TEMP_ALARM_BIT(channel));
break;
default:
return -EOPNOTSUPP;
@@ -668,7 +683,7 @@ static int adt7470_fan_read(struct device *dev, u32 attr, int channel, long *val
*val = 0;
break;
case hwmon_fan_alarm:
- *val = !!(data->alarm & (1 << (12 + channel)));
+ *val = !!(data->alarm & FAN_ALARM_BIT(channel));
break;
default:
return -EOPNOTSUPP;
--
2.55.0
next prev parent reply other threads:[~2026-07-28 0:23 UTC|newest]
Thread overview: 20+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-28 0:22 [hwmon PATCH v2 0/8] hwmon: (adt7470): Multiple fixes Luiz Angelo Daros de Luca
2026-07-28 0:22 ` [hwmon PATCH v2 1/8] hwmon: (adt7470) Fix fans stuck in manual mode on I2C errors Luiz Angelo Daros de Luca
2026-07-28 0:53 ` Guenter Roeck
2026-07-28 0:22 ` [hwmon PATCH v2 2/8] hwmon: (adt7470) Fix cache updated before hardware write on I2C error Luiz Angelo Daros de Luca
2026-07-28 0:54 ` Guenter Roeck
2026-07-28 0:22 ` [hwmon PATCH v2 3/8] hwmon: (adt7470) Fix busy-loop and I2C flooding in update thread Luiz Angelo Daros de Luca
2026-07-28 0:55 ` Guenter Roeck
2026-07-28 0:22 ` [hwmon PATCH v2 4/8] hwmon: (adt7470) Fix swapped PWM3 and PWM4 auto mode masks Luiz Angelo Daros de Luca
2026-07-28 0:57 ` Guenter Roeck
2026-07-28 0:22 ` Luiz Angelo Daros de Luca [this message]
2026-07-28 0:55 ` [hwmon PATCH v2 5/8] hwmon: (adt7470) Fix temperature alarm logic in hwmon_temp_read() Guenter Roeck
2026-07-28 0:22 ` [hwmon PATCH v2 6/8] hwmon: (adt7470) Use cached PWM frequency value Luiz Angelo Daros de Luca
2026-07-28 0:57 ` Guenter Roeck
2026-07-28 0:22 ` [hwmon PATCH v2 7/8] hwmon: (adt7470) Fix divide-by-zero TOCTOU crash in fan speed read Luiz Angelo Daros de Luca
2026-07-28 0:58 ` Guenter Roeck
2026-07-28 0:22 ` [hwmon PATCH v2 8/8] hwmon: (adt7470) Fix PWM auto temp state array and bounds check Luiz Angelo Daros de Luca
2026-07-28 0:58 ` Guenter Roeck
2026-07-28 1:04 ` [hwmon PATCH v2 0/8] hwmon: (adt7470): Multiple fixes Guenter Roeck
2026-07-28 1:08 ` Luiz Angelo Daros de Luca
2026-07-28 3:35 ` Guenter Roeck
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260727-adt7470_fixes-v2-5-598e38a46ba6@gmail.com \
--to=luizluca@gmail.com \
--cc=akpm@linux-foundation.org \
--cc=chris.packham@alliedtelesis.co.nz \
--cc=djwong@us.ibm.com \
--cc=linux-hwmon@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux@roeck-us.net \
--cc=mhoffman@lightlink.com \
--cc=sashiko-bot@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®