From: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
To: Bjorn Andersson <andersson@kernel.org>,
Konrad Dybcio <konradybcio@kernel.org>,
Rob Herring <robh@kernel.org>,
Krzysztof Kozlowski <krzk+dt@kernel.org>,
Conor Dooley <conor+dt@kernel.org>,
Sibi Sankar <sibi.sankar@oss.qualcomm.com>,
Pankaj Patil <pankaj.patil@oss.qualcomm.com>
Cc: Rajendra Nayak <rajendra.nayak@oss.qualcomm.com>,
linux-arm-msm@vger.kernel.org, devicetree@vger.kernel.org,
linux-kernel@vger.kernel.org,
Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
Subject: [PATCH v3 2/5] arm64: dts: qcom: Add Kalambo SoC
Date: Mon, 27 Jul 2026 05:51:39 -0700 [thread overview]
Message-ID: <20260727-b4-kalambo-crd-v3-2-25280faceece@oss.qualcomm.com> (raw)
In-Reply-To: <20260727-b4-kalambo-crd-v3-0-25280faceece@oss.qualcomm.com>
Introduce support for the Qualcomm Kalambo SoC. It is derived from Mahua
with CPU cluster 0 removed, leaving it with just cluster 1 (cpu6-cpu11).
The surviving cluster is re-added to the cpu-map as cluster0, since the
kernel stops scanning at the first missing clusterN index. cpu6-cpu11
are reassigned to SCMI performance domain 0, as domain 1 is no longer
present.
Kalambo uses PDP1 whose tx shmem (lpri1) sits at offset 0x200 within
imem, vs 0x180 on Glymur (PDP0). This pushes the tx region end to
0x380, requiring an imem size override. The rx shmem (lpri0) stays at
offset 0x0. The PDP mailbox addresses are overridden to match the
Kalambo SCP firmware.
Add labels to the cpus and cpu-map nodes in Glymur to allow derived
SoCs to delete and redefine the cpu-map entirely.
Co-developed-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Signed-off-by: Sibi Sankar <sibi.sankar@oss.qualcomm.com>
Signed-off-by: Gopikrishna Garmidi <gopikrishna.garmidi@oss.qualcomm.com>
---
arch/arm64/boot/dts/qcom/glymur.dtsi | 4 +-
arch/arm64/boot/dts/qcom/kalambo.dtsi | 97 +++++++++++++++++++++++++++++++++++
2 files changed, 99 insertions(+), 2 deletions(-)
diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
index f32af66a3f1c..6094e741ff34 100644
--- a/arch/arm64/boot/dts/qcom/glymur.dtsi
+++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
@@ -36,7 +36,7 @@ / {
#address-cells = <2>;
#size-cells = <2>;
- cpus {
+ cpus: cpus {
#address-cells = <2>;
#size-cells = <0>;
@@ -274,7 +274,7 @@ cpu17: cpu@20500 {
#cooling-cells = <2>;
};
- cpu-map {
+ cpu_map: cpu-map {
cluster0 {
core0 {
cpu = <&cpu0>;
diff --git a/arch/arm64/boot/dts/qcom/kalambo.dtsi b/arch/arm64/boot/dts/qcom/kalambo.dtsi
new file mode 100644
index 000000000000..4a68115a4286
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/kalambo.dtsi
@@ -0,0 +1,97 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+#include "mahua.dtsi"
+
+/delete-node/ &cluster0_pd;
+/delete-node/ &cpu_map;
+/delete-node/ &cpu0;
+/delete-node/ &cpu1;
+/delete-node/ &cpu2;
+/delete-node/ &cpu3;
+/delete-node/ &cpu4;
+/delete-node/ &cpu5;
+/delete-node/ &cpu_pd0;
+/delete-node/ &cpu_pd1;
+/delete-node/ &cpu_pd2;
+/delete-node/ &cpu_pd3;
+/delete-node/ &cpu_pd4;
+/delete-node/ &cpu_pd5;
+/delete-node/ &cpu_scp_lpri1;
+
+&cpu6 {
+ power-domains = <&cpu_pd6>, <&scmi_perf 0>;
+ power-domain-names = "psci", "perf";
+};
+
+&cpu7 {
+ power-domains = <&cpu_pd7>, <&scmi_perf 0>;
+ power-domain-names = "psci", "perf";
+};
+
+&cpu8 {
+ power-domains = <&cpu_pd8>, <&scmi_perf 0>;
+ power-domain-names = "psci", "perf";
+};
+
+&cpu9 {
+ power-domains = <&cpu_pd9>, <&scmi_perf 0>;
+ power-domain-names = "psci", "perf";
+};
+
+&cpu10 {
+ power-domains = <&cpu_pd10>, <&scmi_perf 0>;
+ power-domain-names = "psci", "perf";
+};
+
+&cpu11 {
+ power-domains = <&cpu_pd11>, <&scmi_perf 0>;
+ power-domain-names = "psci", "perf";
+};
+
+&cpus {
+ cpu-map {
+ cluster0 {
+ core0 {
+ cpu = <&cpu6>;
+ };
+
+ core1 {
+ cpu = <&cpu7>;
+ };
+
+ core2 {
+ cpu = <&cpu8>;
+ };
+
+ core3 {
+ cpu = <&cpu9>;
+ };
+
+ core4 {
+ cpu = <&cpu10>;
+ };
+
+ core5 {
+ cpu = <&cpu11>;
+ };
+ };
+ };
+};
+
+&imem {
+ reg = <0x0 0x81e08600 0x0 0x380>;
+ ranges = <0x0 0x0 0x81e08600 0x380>;
+
+ cpu_scp_lpri1: scp-sram-section@200 {
+ compatible = "arm,scmi-shmem";
+ reg = <0x200 0x180>;
+ };
+};
+
+&pdp0_mbox {
+ reg = <0x0 0x17610000 0x0 0x8000>,
+ <0x0 0x1a980000 0x0 0x8000>;
+};
--
2.34.1
next prev parent reply other threads:[~2026-07-27 12:51 UTC|newest]
Thread overview: 11+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-07-27 12:51 [PATCH v3 0/5] arm64: dts: qcom: Add Kalambo SoC and CRD Gopikrishna Garmidi
2026-07-27 12:51 ` [PATCH v3 1/5] dt-bindings: arm: qcom: Document Kalambo SoC and board Gopikrishna Garmidi
2026-07-27 12:51 ` Gopikrishna Garmidi [this message]
2026-07-27 13:40 ` [PATCH v3 2/5] arm64: dts: qcom: Add Kalambo SoC Konrad Dybcio
2026-07-27 13:58 ` Abel Vesa
2026-07-29 14:09 ` Konrad Dybcio
2026-07-30 10:43 ` Gopikrishna Garmidi
2026-07-27 12:51 ` [PATCH v3 3/5] arm64: dts: qcom: Add Kalambo CRD Gopikrishna Garmidi
2026-07-27 13:58 ` Abel Vesa
2026-07-27 12:51 ` [PATCH v3 4/5] firmware: qcom: scm: Allow QSEECOM on " Gopikrishna Garmidi
2026-07-27 12:51 ` [PATCH v3 5/5] soc: qcom: ubwc: Add Kalambo UBWC config Gopikrishna Garmidi
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=20260727-b4-kalambo-crd-v3-2-25280faceece@oss.qualcomm.com \
--to=gopikrishna.garmidi@oss.qualcomm.com \
--cc=andersson@kernel.org \
--cc=conor+dt@kernel.org \
--cc=devicetree@vger.kernel.org \
--cc=konradybcio@kernel.org \
--cc=krzk+dt@kernel.org \
--cc=linux-arm-msm@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=pankaj.patil@oss.qualcomm.com \
--cc=rajendra.nayak@oss.qualcomm.com \
--cc=robh@kernel.org \
--cc=sibi.sankar@oss.qualcomm.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox
all inboxes | Powered by JetHome®